This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Design Approach using Seamless Development Environments, SILS/RCP, for Real-Time Control Systems
Technical Paper
2006-01-0310
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Computer Aided Control System Design (CACSD) tools are widely used in the development of embedded control systems. Automatic code generation for CACSD models is the subject of increasing interest. In this study, Software-in-the-Loop Simulation (SILS) and Rapid Control Prototyping (RCP) are proposed as a development framework for the design of real-time control systems. SILS is a simulation environment to consider functional behavior as well as temporal behavior of control systems. RCP supports seamless development from design to implementation through automatic code generation. SILS/RCP environments make it possible to design and analysis control systems under conditions similar to real execution during off-line simulation and to realize controllers in the early design phase.
Recommended Content
Authors
Citation
Ma, J., Youn, J., Shin, M., and Sunwoo, M., "A Design Approach using Seamless Development Environments, SILS/RCP, for Real-Time Control Systems," SAE Technical Paper 2006-01-0310, 2006, https://doi.org/10.4271/2006-01-0310.Also In
SAE 2006 Transactions Journal of Passenger Cars: Electronic and Electrical Systems
Number: V115-7; Published: 2007-03-30
Number: V115-7; Published: 2007-03-30
References
- Gu Zonghua Wang Shige Kim Jeong Chan Shin Kang G. “Integrated Modelling and Analysis of Automotive Embedded control systems with Real-Time Scheduling,” SAE International 115 122 2004
- Kopetz Hermann “Real-Time Systems,” Kluwer Academic Publishers 1997
- Henriksson Dan Cervin Anton Arzen Karl-Erik “TrueTime: Simulation of Control Loops Under Shared Computer Resources,” 15th IFAC World Congress on Automatic Control Barcelona, Spain July 2002
- Vestal Steve “Integrating Control and Software Views in a CACE/CASE Toolset,” IEEE/IFAC Joint Symposium on Computer Aided Control System Design for Control Systems Tucson, AZ, USA 353 358 1994
- Englehart Matt Jackson Mike “ControlH: A Fourth Generation Language for Real-time GN&C Applications,” Proceedings of the 1994 IEEE Symposium on Computer Aided Control System Design 1994
- Mitchell E. E. L. Gauthier J.S. “ACSL: Advanced Continuous Simulation Language - User Guide and Reference Manual,” Mitchell & Gauthier Associates Concord MA 1986
- Eker Johan Cervin Anton “A Matlab Toolbox for Real-Time and Control Systems Co-Design”
- Storch M. F. Liu J. W.-S. “DRTSS: A simulation framework for complex real-time systems,” In Proceedings of the 2nd IEEE Real-Time Technology and Applications Symposium 160 169 1996
- Audsley N. C. Burns A. Richardson M. F. Wellings J. “STRESS: A Simulator for Hard Real-Time Systems”
- Zhu Jiang “Design and simulation of hard real-time applications,” Proc. of 27th Annual Simulation Symposium 217 225 1994
- Cervin Anton Henriksson Dan Lincoln Bo Eker Johan Årzén KarlErik “Analysis and Simulation of Controller Timing,” IEEE Control Systems Magazine 2003
- http://www.rational.com/uml 1997
- Törngren M. Redell O. “A modelling framework to support the design and analysis of distributed real-time control systems,” Microprocessors and Microsystems 24 81 93 2000
- Rebeschieß Sven “MIRCOS - Microcontroller-Based Real Time Control System Toolbox for use with Matlab/Simulink”
- Henzinger Thomas A. Kirsch Christoph M. Sanvido Marco A.A. Pree Wolfgang “From Control Models to Real-Time Code Using Giotto,” IEEE Control Systems Magazine 50 64 2003
- Toeppe Steve Ranville Scott Bostic Dave Wang Yanxin “Practical Validation of Model Based Code Generation for Automotive Applications,” IEEE 10.A.3-1∼10.A.3-14 1999
- Sunwoo Myoungho Choi Jaebum Shin Minsuk “DEVELOPMENT OF TIMING ANALYSIS TOOL FOR DISTRIBUTED REAL-TIME CONTROL SYSTEM,” KSAE Int. Journal of Automotive Technology 5 4 269 276 December 2004
- Lee Wootaik Park Seungbum Sunwoo Myoungho “Towards a seamless development process for automotive engine-control system,” Control Engineering Practice 12 977 986 2004
- Sunwoo M. Shin M. Lee W. “Target-identical rapid control prototyping platform for model-based engine control” IMechE 218 2004
- Song Junghyun Lee Wootaik Sunwoo Myoungho “Development of a Rapid Control Prototyping Platform for Engine Control System,” Transaction of the Korean Society of Automotive Engineers 2003
- Liu Jane W.S. “Real-Time Systems,” Prentice Hall 2000
- Douglass Bruce Powel “Doing Hard Time - Developing Real-Time Systems with UML, Objects, Frameworks, and Patterns,” Addison-Wesley 1999
- Target Language Compiler Reference Guide ver.4 MathWorks Inc.
- Writing S-Functions ver.4 MathWorks Inc.
- Hodge Grantley Ye Jian Stuart Walt “Multi-Target Modeling for Embedded Software Development for Automotive Applications” World congress SAE international, In-Vehicle Networks and Software, Electrical Wiring Harnesses, and Electronics and Systems Reliability 2004
- http://www.acelab.org/HAL