This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of the Control System Using EGR for the HCCI Engine Running on DME
Technical Paper
2005-32-0062
Annotation ability available
Sector:
Language:
English
Abstract
Homogeneous Charge Compression Ignition (HCCI) engine attracts much attention because of its high thermal efficiency and low NOx, PM emissions. On the other hand, Di-Methyl Ether (DME) is expected as one of alternative fuel for the internal combustion engines. In this study, four-stroke HCCI engine running on DME is developed to make it realistic application in production engines. This paper shows construction of the control method using both internal EGR at high temperature and external EGR at low temperature and estimates the performance of developed HCCI engine. Besides combustion characteristics of DME and the effects of EGR are researched with experiment and numerical calculation with elementary reactions. As a result, developed HCCI engine got comparable high thermal efficiency to conventional diesel engine but much lower Indicated Mean Effective Pressure (IMEP) than that. Meanwhile it can be said that DME is suitable fuel for the HCCI engines in combustion characteristics.
Recommended Content
Book | Fuel/Engine Interactions |
Technical Paper | Ignition and Combustion Control of Diesel HCCI |
Technical Paper | Study on Ignition Timing Control for Diesel Engines Using In-Cylinder Pressure Sensor |
Authors
Topic
Citation
Ikemoto, M., Kojima, Y., and Iida, N., "Development of the Control System Using EGR for the HCCI Engine Running on DME," SAE Technical Paper 2005-32-0062, 2005.Also In
References
- Onishi Shigeru Jo Shok Hong Shoda Katsuji Jo Pan Do Kato Satoshi “Active Thermo-Atmosphere Combustion (ATAC) A New Combustion Process for Internal Combustion Engines” SAE Paper 790501 1979
- Thring R. H. “Homogeneous-Charge Compression-Ignition (HCCI) Engines” SAE Paper 892068 1989
- Olsson Jan-Ola Tunestal Per Johnsson Bengt “Closed-Loop Control of an HCCI Engine” SAE Paper 2001-01-1031 2001
- Morimoto Satoshi Kawabata Yasuharu Sakurai Teruhiro Amano Roshiji “Operating Characteristics of Natural Gas-Fired Homogeneous Charge Compression Ignition Engine (Performance Improvement Using EGR)” SAE Paper 2001-01-1034
- Yamasaki Yudai Iida Norimasa “Auto-Igniiotn and Combustion Analysis of DME Air Homogeneous Charge Compression Ignition Engine by Chemiluminescence Measurement (The Infuluence of Charge Inhomogeneity on HCCI Combustion)” Transactions of the Japan Society of Mechanical Engineers (B) 70-697 178 186 2004
- Babajimopoulos Aristotelis Lavoie George A. Assanis Dennis N. “Modeling HCCI Combustion With High Levels of Residual Gas Fraction - A Comparison of Two VVA Strategies” SAE Paper 2003-01-3220
- Koyama Takashi Yamasaki Yudai Iida Norimasa “Numerical Calculation of the Ignition and the Combustion in Homogeneous Charge Compression Ignition Engine by using an Elementary Reaction Model in Case of Dimethyl Ether” Transactions of the Japan Society of Mechanical Engineers (B) 67-657 1274 1281 2001
- Yamasaki Yudai Iida Norimasa “Numerical Analysis of Auto Ignition and Combustion of n-Butane and Air Mixture in the Homogeneous Charge Compression Ignition Engine by Using Elementary Reactions” COMODIA 2001 417 425 2001
- Yamada Hiroyuki Tono Manabu Tezaki Atsumu “Validation of Reactio Mechanism in Ignition Timing of HCCI Engine by Adding Methanol To DME” Transactions of the Japan Society of Mechanical Engineers (B) 70-697 217 223 2004
- Suzuki Shinichi “The Present Conditions of DME Technology Development (first)” Natural Gas 6 2002
- Kajitani S. Chen Z. L. Konno M. Rhee K. T. “Engine Performance and Exhaust Characteristics of Direct-Injection Diesel Engine Operated with DME Spec Publ Soc Automot Eng 35 44 1997
- Uematsu Shinichiro Iikubo Syotaro Shimokawa Kiyohiro “Research and Development of Hybrid Bus with DME Engine -Performance and Characteristics of a DME engine” 2004 JSAE Annual Congress 1 4 2004
- Kojima Y. Iida N. “A Study of the Combustion Completion on the 2-Stroke HCCI Engine with n-Butane/Air Mixture -Investigation of the Composition and the Exhaust Mechanism of the Exhaust Gas-” SAE Paper 2004-01-1978 2004
- Luz Andrew E. Kee Robert J. Miller James A. “SENKIN: A FORTRAN Program for Predicting Homogeneous Gas Phase Chemical Kinetics With Sensitivity Analysis” Sandia National Laboratories Report 1988
- Kee Robert J. Rupley Fran M. Miller James A. “CHEMKIN-II: A FORTRAN Chemical Kinetics Package for the Analysis of Gas-Phase Chemical Kinetics” Sandia National Laboratories Report 1989
- Curran H. J. et al “A Wide Range Modeling Study of Dimethyl Ether Oxidation” International Journal Chemical Kinetics 30-3 229 241 2000
- Kojima S. “Detailed Modeling of n-Butane Autoigniiotn Chemistry” Combust Flame 99-1 87 136 1994
- Frenklash M. Goldenberg M. Moriarty N. Bowman C. T. Davidson D. F. Gardiner W. C. Jr. Smith G. P. Golden D. M. Serauskas R. V. “Optimized Kinetics Mechnism and Calculator for Natural Gas Combustion, NOx Production and Reburing (GRI-Mech 3.0)” International Gas Research Conference 5 329 335 1998 http://www.me.berkeley.edu/gri_mech/
- Jun Daesu Ishii Kazuaki Iida Norimasa “Autoignition and Combustion of Natural Gas in a 4 Stroke HCCI Engine” JSME International Journal 46-1 60 69 2003
- Igarashi Tetsuya Iida Norimasa “Auto Ignition and Combustion of DME and n-Butane/Air Mixtures in Homogeneous Charge Compression Ignition Engine” Transactions of the Japan Society of Mechanical Engineers (B) 64-618 605 612 1998