This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Crashworthy Composite Fuselage Section Concept for Next Generation General Aviation
Technical Paper
2005-01-4011
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Advances in aircraft crashworthiness can be achieved by the development of crashworthy composite fuselage concepts. To attend the design requirements that will be established by the next generation of general aviation aircraft, the present work presents an innovative composite fuselage section concept that besides its added crashworthiness features represents a great potential for weight and manufacturing costs reduction.
Recommended Content
Technical Paper | Pressurization, Light Aircraft — Values and Controls |
Technical Paper | Development of a Light Aircraft Flight Test Equipment |
Technical Paper | Laminar Flow Rethink-Using Composite Structure |
Citation
Maia, L. and de Oliveira, P., "Crashworthy Composite Fuselage Section Concept for Next Generation General Aviation," SAE Technical Paper 2005-01-4011, 2005, https://doi.org/10.4271/2005-01-4011.Also In
References
- Holmes, B.J. Tarry, S. “The Small Aircraft Transportation System Concept and Technologies” AIAA Meeting Paper 2003–2510 2003
- Moore, M.D. “Personal Air Vehicles: A Rural/Region and Intra/Urban On-Demand Transportation System” AIAA Meeting Paper 2003–2646 2003
- Hurley, T.R. Vandenburg, J.M. “Small Airplane Crashworthiness Design Guide” 2002
- Terry, J.E. Hooper, S.J. Nicholson, M. “Design and Test of an Improved Crashworthiness Small Composite Airframe” 2002
- Hooper, S. Henderson, M. Lyle, K. “Analysis of Crash Test of a Composite General Aviation Airplane” FAA International Aircraft Fire & Cabin Safety Research Conference Proceedings 2001
- Federal Aviation Regulations “Part 23 – Airworthiness Standards: Normal, Utility and Acrobatic Category Airplanes”
- Zimmermann, R.E. Warrick, J.C. Lane, A.D. Merrit, N.A. Bolukbasi, A.O. “Aircraft Crash Survival Design Guide: Volume III – Aircraft Structural Crash Resistance” 1989
- Noor, A.K. Carden, H.D. “Computational Methods for Crashworthiness” 1993
- Kindervater, C. Deletombe, E. “Composite Helicopter Structural Crashworthiness: Progress in Design and Crash Simulation Approaches” German Aerospace Center (DLR), Institute of Structures and Design 1999
- Johnson, A.F. Pickett, A.K. “Impact Crash Modeling of Composite Structures a Challenge for Damage Mechanics” German Aerospace Center (DLR), Institute of Structures and Design 1999
- Kohlgrüber, D. “Numerical Simulation of Composite Aircraft Structures under Crash Loading” German Aerospace Center (DLR), Institute of Structures and Design 2000
- Wiggenraad, J.F.M. Michielsen, A.L.P.J. Santoro, D. Le Page, F. Kindervater, C.M. Beltran, F. “Development of a Crashworthy Composite Fuselage Structure for a Commuter Aircraft” 1999
- Kella, S. Knight, N. Jr. “Design, Fabrication, and Testing of Composite Energy-Absorbing Keel Beams for General Aviation Type Aircraft” 2002
- Federal Aviation Administration Advisory Circular 23-20 “Acceptance Guidance on Material Procurement and Process Specifications for Polymer Matrix Composite Systems” 2003
- Tombling, J.S. NG Y.C. Raju, K.S. “Material Qualification and Equivalency for Polymer Matrix Composite Material Systems” 2001
- Tombling, J.S. NG Y.C. Raju, K.S. “Material Qualification and Equivalency for Polymer Matrix Composite Material Systems: Updated Procedure” 2003
- McCarvill, W. Ward, S. Bogucki, G. Tomblin, J. “Guidelines and Recommended Criteria for the Development of a Material Specification for Carbon Fiber/Epoxy Unidirectional Prepregs” 2003
- McCarvill, W. Ward, S. Bogucki, G. Tomblin, J. “Guidelines for the Development of Process Specifications, Instructions, and Controls for the Fabrication of Fiber-Reinforced Polymer Composites” 2003
- Shyprykevich, P. Tombin, J. “Guidelines for Analysis, Testing, and Nondestructive Inspection of Impact-Damaged Composite Sandwich Structures” 2003
- Herbeck, L. Wilmes, H. Kolesnikov, B. Kleinberg, M. “Technology and Design Development for a CFRP Fuselage” German Aerospace Center (DLR), Institute of Structures Mechanics 2003
- Kolesnikov, B. Wilmes, H. Herbeck, L. Kleineberg, M. “Design and Technology Development for a Composite Standard Body Fuselage” German Aerospace Center (DLR), Institute of Structures Mechanics 2003
- Wilmes, H. Kolesnikov, B. Fink, A. Kindervater, C. “New Design Concepts for a CFRP Fuselage” German Aerospace Center (DLR), Institute of Structures Mechanics 2001
- Kleinberg, M. Wenner, U. Hanke, M. “Cost Effective CFRP-Fuselage Manufacturing with Liquid Resin Infusion (LRI) – Technologies” German Aerospace Center (DLR), Institute of Structural Mechanics 2002
- Chen, Z. Vinson, J.R. “Analysis and Optimization of a Pressurized Mid-Plane Assymetric Noncircular Sandwich Fuselage” Journal of Composite Materials 38/8 699 708 2004
- Maia, L.G. Oliveira, P.I.A “A Review of Finite Element Simulation of Aircraft Crashworthiness” To be published in the SAE Brasil Conference 2005 2005
- Jörn, P.J. Herrmann, A.S. Eberth, U. “Entwicklung und Umsetzung eines industriellen Fertigungskonzepts für CFK-Fensterrahmen” 2003
- Klammer, J. Baier, H. “Vibroakustik und Wärmetransport Doppelschaliger CFK-Rümpfe” 2003