This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation Study of Dual Clutch Transmission for Medium Duty Truck Applications
Technical Paper
2005-01-3590
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Dual clutch based transmissions (DCT) have been developed for passenger vehicles in Europe. Compared to a single clutch based transmission (SCT), DCT eliminates torque interrupts during gear-shifting so that the vehicles can run as smooth as one using an automatic transmission (AT). Traditionally AT needs to use torque converters to transmit engine torque to drivelines. However, a torque converter is complicated and expensive, and offers lower driveline efficiency than SCT and DCT. DCT technology is a cost-effective avenue to achieve smooth shifting while taking advantage of the some beneficial features of both AT and SCT. This paper presents the results of an analysis of the application of DCT on medium duty (MD) trucks. First, we set up a 6-speed DCT with two groups of three gear ratios in correspondence to two ceramic dry clutches. Clutch dampers are included in the DCT model. For simplicity but without loss of generality, the synchronizers are not included for this study. Then, based on this DCT model, a complete powertrain for a MD truck is modeled from engine to wheels. The grade, rolling resistance and air resistances are considered in the model as well. A speed based shifting strategy is adopted for this simulation study. Finally, we run the DCT based model to show both transmission and vehicle dynamics. For comparison purposes, an SCT based vehicle model is built too with the same 6-speed ratios for DCT. The simulation results show that DCT can make smoother shifting than SCT and avoid engine flaring. Tentative conclusions will be presented in the final section.
Recommended Content
Technical Paper | Manual Transmission: Synchronization Main Aspects |
Technical Paper | Double Clutch Transmission for Motorcycles |
Technical Paper | Dual Clutch Transmissions - Lessons Learned and Future Potential |
Authors
Topic
Citation
Song, X., Liu, J., and Smedley, D., "Simulation Study of Dual Clutch Transmission for Medium Duty Truck Applications," SAE Technical Paper 2005-01-3590, 2005, https://doi.org/10.4271/2005-01-3590.Also In
New Developments in Commercial Vehicle Transmissions and Advanced Technologies to Improve Driveline
Number: SP-1987; Published: 2005-11-01
Number: SP-1987; Published: 2005-11-01
References
- The MathWorks Inc. ‘Using Simulink and Stateflow in Automotive Applications’ (Simulink-Stateflow Technical Examples)
- Kiencke, U. Nielsen, L. Automotive Control Systems for Engine, Driveline, and Vehicle SAE International Springer 2000
- Goetz, M. Levesley, M. C. Crolla, D. A. “Dynamic Modeling of a Twin Clutch Transmission for Controller Design” Proceedings of the 5th International Conference on Modern Practice in Stress and Vibration Analysis Glasgow, Scotland 9-11 September 2003
- Socin, R. J. Walters, L. K. ‘Manual Transmission Synchronizers’ Automotive Engineering Congress Detroit January 8-12 1968
- Truck Systems Design Handbook Society of Automotive Engineers, Inc. 1992