This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Approaches to Innovations in the Aerospace Sector through Green Engineering and Green Chemistry
Technical Paper
2005-01-3305
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Green engineering and green chemistry provide approaches and strategies for innovation in the aerospace sector that contribute to economic growth and global competitiveness while protecting human health and the environment. By using the life cycle stages of the aerospace sector as a template and looking at various scales, products, processes and systems, this paper presents green engineering and green chemistry opportunities highlighting successful research and case studies for adoption and implementation. Often these advances and alternatives demonstrate enhanced performance, cost effectiveness, and improved environmental characteristics.
Recommended Content
Technical Paper | Time-Temperature Effect on Jet Engine Thermocouple Accuracy and Reliability |
Technical Paper | Plastic Blasting Media Development - A Manufacturer's View |
Journal Article | Design of a Composite Structural Panel for High Volume Production |
Topic
Citation
Zimmerman, J. and Anastas, P., "Approaches to Innovations in the Aerospace Sector through Green Engineering and Green Chemistry," SAE Technical Paper 2005-01-3305, 2005, https://doi.org/10.4271/2005-01-3305.Also In
References
- Nelson, W. M Agricultural Applications in Green Chemistry American Chemical Society Symposium 887 American Chemical Society Press 2004
- Anastas, P. T. Heine, L. Williamson, T. C. Green Engineering American Chemical Society Press 2000
- Sutherland, J. W. Gunter, K. L. Haapala, K. R. Khadke, K. Skerlos, S. J. Zimmerman, J. B. Olson, W. W. Sadasivuni, R. “Environmentally Benign Manufacturing: Status and Vision for the Future,” Transactions of NAMRI/SME 2003 345 352
- Anastas, P. T. Warner, J. C. Green Chemistry: Theory and Practice Oxford University Press 1998
- Anastas, P. T. Zimmerman, J. B. “Design through the Twelve Principles of Green Engineering” Env. Sci. and Tech. 37 5 95 101 2003
- Aerospace Industries Association Newsletter October 1994
- Wool, R. P. Khot, S. N. LaScala, J. J. Can, E. orye S. S. Williams G. I. “Affordable composites and plastics from renewable resources: part II: manufacture of composites” J. Applied Polym. Sci. 823 205 224 ,
- Zimmerman, J. B. Clarens, A. F. Skerlos, S. J. Hayes, K. F. “Design of Emulsifier Systems for Petroleum- and Bio-based Semi-Synthetic Metalworking Fluid Stability Under Hardwater Conditions.” Environmental Science and Technology 37 23 5278 5288 2003
- Halford, B. Chemical and Engineering News 82 36 2004 36 39
- Logan, B. “Assessing the outlook for perchlorate remediation” Environmental Science and Technology 35 23 482A 497A 2001
- Waldman, P. EPA’s Ruling On Perchlorate Draws Criticism Wall Street Journal February 22 2005
- Earle, M. J. Seddon, K. R. “Ionic liquids. Green solvents for the future,” Journal of Pure and Applied Chemistry 72 7 1391 1398 2000
- Ritter, S. “Green Innovations” Chemical and Engineering News 82 28 25 30 2004
- Wei, C. M. Li, C. J. “Highly Enantioselective Catalytic Direct Addition of Alkynes to Imines in Water” J. Am. Chem. Soc. 2002 124 5638 5639
- Kennedy, M. L. “Getting to the bottom line: how TCA shows the real cost of solvent substitution” Pollution Prevention Review 4 155 164 1994
- Wolf, K. “The truths and myths about water-based cleaning: a systems approach to choosing the best alternative” Pollution Prevention Review 39 1156 1170 1994
- Karrs, S McMonagle, M “An examination of the payback for an aqueous cleaner recovery unit” Plat Surface Finish 80 45 50 1993
- Sherman, J. Chin, B. Huibers, P. D. T. Garcia-Valls, R. Hatton, T. A. “Solvent Replacement for Green Processing” Environmental Health Perspectives 106 S1 1998
- McHardy, J. Sawan, S. Supercritical Fluid Cleaning ChemTec Publishing Ontario, Canada 1998
- DeSimone, J. M. “Practical Approaches to Green Solvents” Science 297 799 803 2002
- Rothman, L. B. Robey, R. J. Ali, M. K. Mount, D. J. “Supercritical fluid processes for semiconductor device fabrication” Advanced Semiconductor Manufacturing 2002 IEEE/SEMI Conference and Workshop 372 375 2002
- Eckert, C. A. Liotta, C. L. Bush, D. Brown, J. S. Hallett, J. P. “Sustainable Reactions in Tunable Solvents” Journal of Physical Chemistry B 108 47 18108 18118 2004
- Salerno, R. F. “High pressure supercritical carbon dioxide efficiency in removing hydrocarbon machine coolants from metal coupons and component parts.” Solvent Substitution, Annual International Workshop Phoenix, Arizona December 4–7 1990
- Lu, Y. F. Song, W. D. Lukyanchuk, B. S. Hong, M. H. Zheng, W. Y. “Recent Progress on Modeling of Laser Surface Cleaning” Materials Research Society Symposium 617 J1.4.1 2000
- Vereecke, G. Rohr, E. Heyns, M. M. “Laser-assisted removal of particles on silicon wafers” Journal of Applied Physics 85 7 3837 3843 1999
- “Photonic cleaning process moves to heavy industry” Photonics Spectra 3 22 1997
- Schweizer, G. “CO2 laser reduce waste from aircraft paint removal” Opto & Laser Europe 18 42 43 1995
- Lee, J. M. Watkins, K. G. “Laser removal of oxides and particles form copper surfaces for microelectronic fabrication” Optics Express 7 2 68 2000
- Kumar, R. Tayagi, R. Parmar, V. S. Samuelson, L. A. Kumar, J. Schoemann, A. Westmoreland, P. R. Watterson, A. C. “Biocatalytic Synthesis of Highly Flame Retardant Inorganic-Organic Hybrid Polymers,” Advanced Materials 16 17 1515 1520 2004
- “Plastics in Construction: Performance and Affordability at What Cost?” Building Green 10 7 8 2001
- Börner, H. G. Beers, K. Matyjaszewski, K. Sheiko, S.S. Möller, M. “Synthesis of Molecular Brushes with Block Copolymer Side Chains Using Atom Transfer Radical Polymerization” Macromolecules 34 4375 4383 2001
- McAuley, J. Environmental Issues Impacting Future Growth and Recovery of Polypropylene in Automotive Design Proceedings from Society of Plastics Engineers Dearborn, MI 1999 www.plasticsresource.com/recycling/ARC99/Mcauley.htm
- Knight, W. Curtis, M. “Measuring your ecodesign” Manufacturing Engineering 81 64 69 2002