This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Vibration Modes of Radial Tires: Application to Non-rolling and Rolling Events
Technical Paper
2005-01-2526
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The accurate simulation of the dynamics of the tire is a critical factor in predicting the performance of the tire/vehicle system with respect to ride, NVH, durability and ABS braking. In recent years several advanced commercial tire models have been developed for this purpose, such as FTIRE, CD-TIRE, RMOD-K and TNO-SWIFT. These models utilize tire modal data to calibrate internal parameters so that the models exhibit the proper dynamic response. Although the simulations typically involve a rolling tire, the tire modal data is typically obtained from a non-rolling condition. To address this inconsistency the effect of rolling versus non-rolling on the tire dynamics response is discussed in this paper and supported through theoretical concepts, measurement data and simulations with the tire model FTIRE. The FTIRE model is used to predict cleat impact based on different boundary conditions to demonstrate the effect of a rolling and non-rolling tire simulation. After accounting for rolling effects good correlation with experimental data is achieved.
Recommended Content
Authors
Citation
Dorfi, H., Wheeler, R., and Keum, B., "Vibration Modes of Radial Tires: Application to Non-rolling and Rolling Events," SAE Technical Paper 2005-01-2526, 2005, https://doi.org/10.4271/2005-01-2526.Also In
References
- Scavuzzo, R.W. Richards, T.R. Charek, L.T. “Tire Vibration Modes and Effects on Vehicle Ride Quality,” Tire Science and Technology, TSTCA 21 1 Jan.-Mar. 1993 23 39
- Kao, B. G. et.al. “A New Tire Model for Vehicle NVH Analysis,” SAE Paper 870424 1987
- Clayton, W.B. Saint-Cyr R. “Incorporation of the Tire Air Cavity Resonance into The Modal Tire Model,” Proceedings of the 16 th IMAC 50 56 Santa Barbara, Ca. Feb. 1998
- Vinesse, E.P. “Substructuring Method and Eigen-function Representation For a Rolling Tyre Coupled to a Secondary Mechanical System,” Proc. Instn. Mech. Engrs 210 1996 313 325
- Zhang Y. Palmer T. Farahani, A. “A Finite Element Tire Model and Vibration Analysis: A New Approach,” Tire Science and Technology, TSTCA 26 3 Jul.-Sep 1998 149 172
- Ushijima, T. Takayama, M. “Modal Analysis of Tire and System Simulation,” SAE Paper 880585 , SAE International Congress & Exhibition Detroit, MI March 1988
- Gipser, M. “FTIRE, a New Fast Tire Model for Ride Comfort Simulations,” International ADAMS User Conference Berlin 1999
- Wheeler, R. L. Dorfi, H. R. Keum, B. B. “Vibration Modes of Radial Tires: Measurement, Prediction, and Categorization Under Different Boundary and Operating Conditions,” SAE Paper 2005-01-2523 SAE Noise & Vibration Conference Traverse City, MI May 2005
- Dorfi, H. R. “A study of the In-plane Force Transmission of Tires,” Tire Science and Technology, TSTCA 32 4 Oct.-Dec. 2004 188 213
- Dorfi, H. R. “Tire Cleat Impact and Force Transmission: Modeling Based on FTIRE and Correlation to Experimental Data,” SAE Paper 2004-01-1575 SAE World Congress & Exhibition Detroit, MI March 2004
- Wrana, C. et al. “Analysis of Network Structures in Filled Elastomers by Amplitude Dependent Measurements under Mono- and Bimodal Sinusoidal Deformation,” Paper presented at the Rubber Division American Chemical Society San Francisco, CA 2003
- Soedel, W. “Vibrations of Shells and Plates,” 2nd 1993
- Soedel, W. Prasad M. “Calculation of Natural Frequencies and Modes of Tires in Road Contact by Utilizing Eigenvalues of the Ax-Symmetric Non-contacting Tire,” Journal of Sound and Vibration 70 4 1980 573 584