This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Correlating Noise Sources Identified by Beamforming with Sound Power Measurements
Technical Paper
2005-01-2510
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Farfield beamforming is a powerful tool for identifying spatially distributed noise sources. The technique yields an image of the relative sound levels within the measurement aperture. The latest version of the beamforming software is now able to estimate the total power within its measurement aperture. In this work, the noise sources on three types of construction equipment are imaged with a beamforming array, while simultaneously the radiated sound powers are determined by a six-microphone hemisphere per ISO 6393 or ISO 6395. Of particular interest are: noise induced by turbulent flow at the exit of an exhaust stack, the effect of a noise reduction package in the engine compartment, and crawler track noise during motion. The absolute levels of the mapped source regions are compared with the total radiated sound power.
Recommended Content
Technical Paper | A Case Study on the Improvement of Idle Quality of an SUV Car with DI Diesel Engine |
Technical Paper | Estimation of the Mean Value Engine Torque Using an Extended Kalman Filter |
Authors
Citation
Washburn, K., Frazer, T., and Kunio, J., "Correlating Noise Sources Identified by Beamforming with Sound Power Measurements," SAE Technical Paper 2005-01-2510, 2005, https://doi.org/10.4271/2005-01-2510.Also In
References
- Christensen, J.J. Hald, J. “Beamforming.” Brüel and Kjær Technical Review, No. 1-2004 B&K Publication 0007-2621
- Hald, J. “An integrated NAH/Beamforming solution for efficient broadband noise source localization.” Paper 2005-01-2537 , Proceedings SAE Noise and Vibr. Conf. 2005
- Second 1998 “Acoustics - Measurement of exterior noise emitted by earth-moving- machinery - Stationary test conditions.” International Organization for Standardization
- 1996 “Acoustics - Measurement of exterior noise emitted by earth-moving machinery - Dynamic test conditions.” International Organization for Standardization
- Second 1994 “Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane.” International Organization for Standardization