This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Premixed Combustion Modeling in an SI Engine Considering the Burned Gas Composition
Technical Paper
2005-01-2108
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Conventional combustion models are suitable for predicting flame propagation for a wrinkled flamelet configuration. But they cannot predict the burned gas composition. This causes the overestimation of burned gas temperature and pressure. A modified method of combustion simulation was established to calculate the chemical composition and to investigate their ultimate fate in the burned gas region.
In this work, the secondary products of combustion process, like CO and H2, were considered as well as the primary products like CO2 and H2O. A 3-dimensional CFD program was used to simulate the turbulent combustion and a zero dimensional equilibrium code was used to predict the chemical composition of burned gas. With this simple connection, more reasonable temperature and pressure approaching the real phenomena were predicted without additional time costs.
Recommended Content
Authors
Topic
Citation
Kwon, H., Min, K., Choi, H., and Lee, H., "Premixed Combustion Modeling in an SI Engine Considering the Burned Gas Composition," SAE Technical Paper 2005-01-2108, 2005, https://doi.org/10.4271/2005-01-2108.Also In
References
- Castagne, M. Cheve, E. Dumas, J.P. Henriot, S. “Advanced Tools for Analysis of Gasoline Direct Injection Engines” SAE paper No. 2000-01-1903 2000
- Spalding, D.B. “Development of the Eddy-Break-Up Model of Turbulent Combustion” The 16th Symposium (International) on Combustion 1657 1663 The Combustion Institute 1976
- Weller, H.G. “The Development of a New Flame Area Combustion Model Using Conditional Averaging” Thermo-Fluids Section Report TF/9307 Department of Mechanical Engineering, Imperial College of Science Technology and Medicine 1993
- Peters, H. Worret R. Spicher U. “Numerical Analysis of the Combustion Process in a Spark-Ignition Engine” COMODIA 2001 313 314 2001
- Ranasinghe, J. Cant, S. “A Turbulent Combustion Model for Stratified Charged Spark Ignition Engine” SAE paper No. 2000-01-0275 2000
- Haworth, D.C. Blint, R.J. Cuenot, B. Poinsot, T.J. “Numerical Simulation of Turbulent Propane-Air Combustion with Nonhomogeous Reactant” Combustion and Flame 121 395 417 2000
- Lee, Y.K Pae, S.S. Min, K.D. Kim, E.S. “Prediction of Knock Onset and the Autoignition Site in Spark-Ignition Engines” Proc. Instn. Mech. Engrs. 214 751 763 2000
- Herwerg, R. Maly. R. “A Fundamental Model for Flame Kernel Formation in S.I. Engines” SAE paper No. 922243 1992
- Pae, S.S. Min, K.D. “Modeling of Laminar Burning Velocities for Hydrocarbon and Methanol Fuels by Using Detailed Chemical Reaction Mechanisms” Trans. of the KSME 25 1303 1310 2001
- Kee, R.J. Grcar, J.F. Smooke, M.D. Miller, J.A. “A Fortran Program for Modeling Steady Laminar One-Dimensional Premixed Flames” Sandia Nat'l Lab. Livermore 1982
- Axelsson, E.I. Brezinksy, K. Dryer, F.L. Fitz, W.J. Westbrook, C.K. “Chemical Kinetic Modelling of Large Alkane Fuels: n-octane and iso-octane” 21st Symposium (International) on Combustion The Combustion Institute Pittsburgh 783 793 1986
- Kim, H.U. Pae, S.S. Min, K.D. “Reduced Chemical Kinetic Model for the Ignition Delay of Hydrocarbon Fuels and DME” Combust, Sci. and Tech. 2002
- Adapco The ES-ICE User Manual Adapco New York 2002
- Amsden, A.A. O'Rourke, P.J. Butler, T.D. “KIVA-II: A Computer Program for Chemically Reactive Flows with Sprays” Los Alamos National Laboratory 1989
- Heywood, J.B. “Internal Combustion Engines Fundamentals” McGraw-Hill Publication 1994
- Kleemann, A.P. Gosman, A.D. Binder, K.B. “Heat Transfer in Diesel engine: A CFD Evaluation Study” 5th International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines Nagoya Japan 2001
- AVL BOOST User's Guide AVL Graz, Austria 2000
- Reynolds W.C. “The Element Potential Method for Chemical Equilibrium Analysis: Implementation in the Interactive Program STANJAN” Department of Mechanical Engineering, Stanford University 1986