This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Investigation of Springback of Dual-Phase Steels
Technical Paper
2005-01-1332
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
With a view to advancing the use of DP steels in the automotive industry, this research emphasizes the characterization of mechanical behavior and forming of DP sheet steels. Two grades of DP steels were studied, DP 600/300 and DP 600/400.
Standard tension tests were used to characterize the mechanical behavior. Properties such as elongation to fracture, strength coefficient, n-value and ultimate tensile strength (UTS) were determined. Moreover, tension-compression tests were also conducted on the two steel grades considered to study the Bauschinger effect.
In addition, simple bending experiments were done in directions 0, 45, and 90 degrees to the rolling direction, to examine the effect of rolling direction and material anisotropy on the springback angles in simple forming. Multiple-bend experiments were also conducted to study the effect of reverse yield on the final geometry of the formed part. It was found that the effect of planar anisotropy can be neglected and the influence of the Bauschinger effect on the springback angle is not very significant.
Finally, draw-bend experiments were performed. The clamping force or blank-holding-force (BHF) was varied to study its effect on the final springback angles of the part.
Recommended Content
Authors
Topic
Citation
Ragai, I. and Nemes, J., "Experimental Investigation of Springback of Dual-Phase Steels," SAE Technical Paper 2005-01-1332, 2005, https://doi.org/10.4271/2005-01-1332.Also In
References
- Kot, R. A. Morris, J. W. “Structure and properties of dual-phase steels” proceedings of a symposium/sponsored by the TMS-AIME Heat Treatment Committee at the AIME annual meeting New Orleans, L.A. February 19-21 1979
- Yan et. Al “A New Dual Phase Steel for Automotive Body Panels” SAE2003 paper number 2003-01-0518 2003
- Hill, R. “Mathematical Theory of Plasticity” Oxford Press 1950
- Bate, P.S. Wilson, D.V. “Analysis of the Bauschinger Effect” Acta Metall. 34 6 1097 1105 1986
- ASTM Standard E8M “Standard Test Methods for Tension Testing of Metallic Materials” Annual Book of ASTM Standards ASTM 78 98 1999
- Chun, B.K. Kim, H.Y. Lee, J.K. “Modeling the Bauschinger Effect for Sheet Metals, Part II: Applications” International Journal of Plasticity 18 597 616 2002
- Gau, J-T Kinzel, G.L. “An Experimental Investigation of the Influence of the Bauschinger Effect on Springback Predictions” Journal of Materials Processing Technology 108 369 375 2001
- Ragai, I Lazim, D. Nemes, J.A. “Anisotropy and Springback in Draw-Bending of Stainless Steel 410: Experimental and Numerical Study” Journal of Materials Processing Technology