This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fatigue Properties of Stainless Steel Lap Joints. Spot Welded, Adhesive Bonded, Weldbonded, Laser Welded and Clinched Joints ff Stainless Steel Sheets-A Review of their Fatigue Properties
Technical Paper
2005-01-1324
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The type of joints covered are i) spot welded stainless to stainless and to galvanised carbon steel, ii) adhesive bonded stainless to stainless, iii) weld bonded stainless to stainless, iv) laser welded stainless to stainless and to galvanised carbon steel, v) clinched stainless to stainless steel.
The materials studied are AISI 301 and 304 stainless steel and high strength duplex 2101, 2304, 2205 and 2507 stainless steel. The thickness range is 0.7 - 4 mm. Fatigue properties in terms of Wöhler curves and Fatigue strength at 2*106 cycles are compared between the different joining methods using load transfer capacity per unit length of the joints.
Fatigue strength is shown to be independent of matrix strength for spot welded joints. Spot welded, laser welded and clinched joints show similar fatigue properties for 1mm sheet joints. Adhesive bonded joints are five-fold stronger and the weld bonded joints show considerable scatter with a lower bound fatigue strength between spot welded and adhesive bonded joints.
Recommended Content
Authors
Citation
Nordberg, H., "Fatigue Properties of Stainless Steel Lap Joints. Spot Welded, Adhesive Bonded, Weldbonded, Laser Welded and Clinched Joints ff Stainless Steel Sheets-A Review of their Fatigue Properties," SAE Technical Paper 2005-01-1324, 2005, https://doi.org/10.4271/2005-01-1324.Also In
References
- Linder J. Thuvander A. Melander A. Gustavsson A. Bergengren Y. A finite elemente study of spot-welded stainless sheet steels Swedish Institute for Metals Research 1997
- Nordberg H. McCann S. Rotation of overlap joints under load AvestaPolarit Research Report 20020403 2002
- Linder J. Melander A. Larsson M. Bergengren Y. Fatigue data and design methods for spot welded austenitic and duplex stainless sheet steels “Stainless steels in transport industry” Espoo, Finland 1998
- Linder J. Melander A. Larsson M. Bergengren Y. Fatigue design of spot welded austenitic and duplex stainless steels Fatigue and Fracture Engng
- Nord S. Fatigue performance of resistance welded joints in ultra high strength stainless steel AvestaPolarit internal report 2001
- Forsman T. Fatigue of spot- and projection weldments of high-strength stainless steel Swedish Institute for Metals Research 2003
- Ueda T. Kawataka H. Fatigue Strength of Spot Welded Joints Trans ISIJ 9 1969 388
- Söderlund P. Welding Tech.,KTH 1991
- Wray T. Resistance Spot Welding Of Duplex Stainless Steel Sheffield Hallam University 2004
- Linder J. Melander A. Fatigue strength of spot welded stainless sheet steels in 3% NaCl. Int.J Fatigue 20 1998 383
- Marples M. PhD programme Sheffield Hallam University 2002
- Manual Press Joining Eckold GmbH & Co Germany 1995
- Jacobsen J. Hamburg-Harburg Dr.-Ing Dissertation 1997
- Sjöström P. Linköping University 2004
- Boyes R. Adhesive bonding of stainless steel; Strength and durability Sheffield Hallam University 1998
- McCann S. A Study of Environmental Exposure on Structural Adhesively Bonded Austenitic Stainless Steel Sheffield Hallam University 2003
- Groth M.Ring Meurling F. Weldbonded stainless steel joints - strength and fatigue properties “Stainless steels in transport industry” Espoo, Finland 1998
- Groth M.Ring Adhesive Bonding and Weldbonding of Stainless Steel Luleå University of Technology Luleå 1998
- Kaitanov A. Static and Fatigue Strengths of Laser Welded Over- Lap Joints with Controlled Penetration State University of Marine Technology St.Petersburg 2002
- Dinsley C. Laser Welding of Austenitic and Duplex Stainless Steel to Zinc-Coated Mild Steel Sheffield Hallam University 2004
- Linder J. et al. Fatigue strength of laserwelded stainless steel sheets Swedish Institute for Metals Research Report IM-2000-529
- Ericsson C. Fatigue resistance of laser welded type 1.4301 stainless steel sheets in cold worked condition AvestaPolarit Report SE20020403 2002