This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Iterative Multi-Step Diagnosis Process for Engine Systems
Technical Paper
2005-01-1055
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The plausibility of measurements is a key question for many kinds of large complex systems. In this paper we present a method of automatic measurement data plausibility assessment. Even the focus here was put on an automotive engine test bench application, the presented method can cope also with other complex systems with a large number of measurement devices included. The presented method is still in the development phase, thus its performance still did not reach the optimum. But as for the time being the obtained experimental results seams to be quite acceptable.
Recommended Content
Authors
Topic
Citation
Efendic, H., del Re, L., and Frizberg, G., "Iterative Multi-Step Diagnosis Process for Engine Systems," SAE Technical Paper 2005-01-1055, 2005, https://doi.org/10.4271/2005-01-1055.Also In
References
- Takagi, M. “Prospects of Failure Diagnostics of Automotive Electronic Control Systems” SAE paper No.94C055 Jurgen R.K. On- and Off-board Diagnostics SAE Inc Warrendale, PA 1 12
- Bremer, W “On- and Off-board Diagnostics: The role of Legislation and Standardization” Jurgen R.K. On- and Off-board Diagnostics SAE Inc Warrendale, PA 557 566
- Mowll, D. Raab, A. Binder, K. Willand, J. 2000 “Issues arising from statistical engine testing” Statistics for Engine Optimization Edwards S.P. Grove D.M. Wynn H.P. 37 48 Professional Engineering Publishing
- Shayler, P.J. Dow, P.I. Hayden, D.J. Horn, G. 2000 “Using Neural Networks in the Characterization and Manipulation of Engine Data” Statistics for Engine Optimization Edwards S.P. Grove D.M. Wynn H.P. 145 162 Professional Engineering Publishing
- Schrempf, A. del Re, L. Groißböck, W. Lughofer, E. Klement, E.P. Frizberg, G. 2001 “Automatic Engine Modeling for Failure Detection” Proceedings 2001 ASME International Mechanical Engineering Congress and Exposition CD-ROM 2 1 8 New York, USA
- Jakubek, S. Strasser, T. 2002 “Fault-Diagnosis using Neural Networks with Ellipsoidal Basis Functions” Proceedings of the 20th American Control Conference ACC 02 3846 3851 Anchorage, Alaska, USA May 8 10
- Efendic, H. Schrempf, A. del Re, L. “Data based fault isolation in complex measurement systems using models on demand” Proc. 5th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes Washington DC, USA 2003 1149 1154
- Korbicz, J. Koscielny, J. M. Kowaczluk, Z. Cholewa, W. Fault Diagnosis Springer - Verlag Berlin Heidelberg 2004 31 40
- Ninness, B. Goodwin, G. “Estimation of model quality,” Centre for Industrial Control Science and Department of Electrical and Computer Engineering, University of Newcastle Australia March 1995
- Sreedharan, P. Haves, P. “Comparison of chiller models for use in model-based fault detection” International Conference on Enhancing Building Operations Austin TX July 2001
- Verdult, V. Verhaegen, M. Chou, C.T. Lovera, M. 1998 “Efficient and Systematic Identification of MIMO Bilinear State Space Models,” Proceedings of the 37 th IEEE Conference on Decision & Control 1260 1265 Tampa, Florida, USA
- Mäkilä, P. M. “Optimal approximation and model quality estimation for nonlinear systems” Proc. 13th IFAC Symposium on System Identification Roterdam 2003 1904 1909
- Ouvrard, R. Coirault, P. Poinot, T. Trigeassou, J. C. 2000 “A new orthogonal basis functions for error quantification in system identification,” Proc. 12th IFAC Symposium on System Identification SYSID 2000 Santa Barbara, CA, USA 1 187 192
- Isermann, R. Ballé, P. 1997 “Trends in the Application of Model-Based Fault Detection and Diagnosis of Technical Processes,” Control Engineering Practice Vol. 5 No. 5 709 719 Elsevier Science
- Blanke, M. Kinnaert, M. Lunze, J. Staroswiecki, M. 2000 Diagnosis and Fault-Tolerant Control Springer 3 8
- Fang, C. Ge, W. Xiao, D. 2000 “Fault Detection and Isolation for Linear Systems using Detection Observers,” Issues of Fault Diagnosis for Dynamic Systems Patton, R.J. Frank, P.M. Clark, R.N. 87 113 Springer Verlag
- Doyle, J. C. Stein, G. 1981 “Multivariable feedback design: concepts for a classical / modern synthesis,” IEEE Trans. Automatic Control 26 4 16
- Gertsbakh, I. 2003 Measurement Theory for Engineers Springer - Verlag Berlin Heidelberg 87 94
- Jørgensen, R. B. Patton, R. J. Chen, J. 1995 “An Eigenstructure Assignment Approach to FDI for the Industrial Actuator Benchmark Test” Control Engineering Practice 3 12 Elsevier Science Ltd. 1751 1756
- Frank, P.M. 1978 Introduction to System Sensitivity Theory 3 Definitions of Sensitivity Functions and Measures Academic Press 20 85
- Ljung, L. 1999 “Model validation and model error modeling,” Wittenmark B. Rantzer A. The Åström Symposium on Control Lund, Sweden
- Braun, M.W. Rivera, D.E. Stenman, A. 2001 “A ‘Model-on-Demand’ identification methodology for nonlinear process systems” International Journal of Control Vol. 74 No. 18 1708 1717