This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Wrought Magnesium Alloys and Manufacturing Processes for Automotive Applications
Technical Paper
2005-01-0734
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this paper, the mechanical properties, structural performance and mass saving potential of wrought magnesium alloys are compared to several major automotive materials: mild steel, advanced high-strength steel, cast and wrought aluminum, cast magnesium, plastics and fiber-reinforced composites. Manufacturing processes including welding and joining of magnesium extrusions and sheet products are critically reviewed. The current and potential applications of wrought magnesium alloys in automotive interior, body and chassis areas are discussed. Technical challenges and research opportunities for these applications are identified.
Recommended Content
Technical Paper | Joining Dissimilar Materials by Magnetic Pulse Welding |
Technical Paper | Friction Stir Welding as a Rivet Replacement Technology |
Aerospace Material Specification | Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 °F (649 to 721 °C) Solidus-Liquidus Range |
Topic
Citation
Luo, A., "Wrought Magnesium Alloys and Manufacturing Processes for Automotive Applications," SAE Technical Paper 2005-01-0734, 2005, https://doi.org/10.4271/2005-01-0734.Also In
References
- Luo A.A. “Magnesium: Current and Potential Automotive Applications” JOM Journal of Metals 2002 54 2 42 48
- Cole G.S. “Issues that Influence Magnesium's Use in the Automotive Industry” Magnesium Alloys 2003 , Materials Science Forum Trans Tech Switzerland 2003 419-422 43 50
- Schumann S. Friedrich H. “Current and Future Use of Magnesium in the Automobile Industry” Magnesium Alloys 2003 , Materials Science Forum Trans Tech Switzerland 2003 419-422 51 56
- Luo A.A. “Recent Magnesium Alloy Development for Automotive Powertrain Applications” Magnesium Alloys 2003 , Materials Science Forum Trans Tech Switzerland 2003 419-422 67 66
- Kaneko T. Suzuki M. “Automotive Applications of Magnesium Alloys” Magnesium Alloys 2003 , Materials Science Forum Trans Tech Switzerland 2003 419-422 67 72
- Riopelle L. “Magnesium Applications” International Magnesium Association (IMA) Annual Magnesium in Automotive Seminar Livonia, MI April 20 2004
- Taub A.I. SAE (Society of Automotive Engineers) World Congress March 6 2003 Detroit, MI.
- American Metal Market, Metal Statistics www.AMM.com May 2004
- ASM Metals Handbook ASM International Materials Park, OH 1998
- Verbrugge M.W. Presentation at SAE World Congress March 10 2004 Detroit, MI.
- Hydro Magnesium “Data Sheet: Die Cast Magnesium Alloys” Hydro Magnesium Porsgrunn, Norway November 1996
- Kia H. Wang C.S. Foss P.H. GM R&D Center July 2004
- Hydro Magnesium “Corrosion and Finishing of Magnesium Alloys” Hydro Magnesium Porsgrunn, Norway November 1997
- Schreckenberger H. Papke M. Eisenberg S. “The Magnesium Hatchback of the 3-Liter Car: Processing and Corrosion Protection” SAE Technical Paper 2000-01-1123 SAE International Warrendale, PA 2001
- Balzer J.S. Dellock P.K. Maj M.H. Cole G.S. Reed D. Davis T. Lawson T. Simonds G. “Structural Magnesium Front End Support” SAE Technical Paper 2003-01-0185 SAE International Warrendale, PA 2003
- Wang G.G. Stewart K. Berkmortel R. Skar J.I. “Corrosion Protection for External Magnesium Automotive Components” SAE Technical Paper No. 2001-01-0421 SAE Warrendale, PA 2001
- ASM Specialty Handbook Magnesium and Magnesium Alloys Avedesian M.M. Baker H. ASM International Materials Park, OH 1999
- Timminco Magnesium Wrought Products Timminco Corporation Brochure Aurora, CO 1998
- Tiwari B.L. Sachdev A.K. Bommarito J.L. “Magnesium Extrusions: Alloy and Process Development” GM R&D
- Luo A.A. Sachdev A.K. “Magnesium Wrought Alloy Having Improved Extrudability and Formability” March 4 2004
- Savage K. King J.F. “Hydrostatic Extrusion of Magnesium” Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2000 609 614
- Bruggemann C.J. “Hydroforming of Structure Parts for Personal Cars” International Conference on Hydroforming Fellbach/Stuttgart, Germany October 12-13 1999 353 371
- Luo A.A. Sachdev A.K. “Strain Development and Microstructure Evolution in Aluminum Tube Bending and Hydroforming” Aluminum 2002 Das S. Skillingbreg M.H. TMS Warrendale, PA 2002 123 131
- Becker J. Fischer G. Schemme K. “Ligh Weight Construction using Extruded and Forged Semi-Finished Products Made of Magnesium Alloys” Magnesium Alloys and Their Applications Mordike B.L. Kainer K.U. Werkstoff- Informationsgesellschaft Frankfurt, Germany 1998 15 29
- Luo A.A. Sachdev A.K. “Development of A Moderate Temperature Bending Process For Magnesium Alloy Extrusions” Proc. of International Conference on Magnesium Sept. 20-23 2004 Beijing, China
- Luo A.A. Sachdev A.K. “Mechanical Properties and Microstructure of AZ31 Magnesium Alloy Tubes” Magnesium Technology 2004 Luo A.A. TMS Warrendale, PA 2004 79 85
- Enss J. Everetz T. Reier T. Juchmann P. “Properties of Magnesium Rolled Products” Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2000 591 595
- Krajewski P.E. “Elevated Temperature Forming of Sheet Magnesium Alloys” Magnesium Technology 2002 Kaplan H.I. TMS Warrendale, PA 2002 175 179
- Krajewski P.E. “Elevated Temperature Behavior of Sheet Magnesium Alloys” SAE Technical Paper 2001-01-3104 SAE International Warrendale, PA 2001
- Palkowski H. Wondraczek L. “Thin Slab Casting as a New Possibility for Economic Magnesium Sheet Production” Magnesium - Proceedings of the 6 th International Conference Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2003 774 782
- Moll A. Mekkaoui M. Schumann S. Friedrich H. “Application of Mg Sheets in Car Body Structures” Magnesium - Proceedings of the 6 th International Conference Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2003 935 942
- Braunig S. During M. Hartmann H. Viehweger B. “Magnesium Sheets for Industrial Applications” Magnesium - Proceedings of the 6 th International Conference Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2003 955 961
- Kaese V. Greve L. Juttner S. Goede M. Schumann S. Friedrich H. Holl W. Ritter W. “Approaches to Use Magnesium as Structural Material in Car Body” Magnesium - Proceedings of the 6 th International Conference Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2003 949 954
- Juchmann P. Wolff S. “New Perspectives with Magnesium Sheet” Magnesium - Proceedings of the 6 th International Conference Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2003 1006 1012
- Neugebauer R. Seifert M. “Results of Tempered Hydroforming of Magnesium Sheets with Hydroforming Fluids” Magnesium - Proceedings of the 6 th International Conference Magnesium Alloys and Their Applications Kainer K.U. Wiley-VCH Weinheim, Germany 2003 306 312
- Kurz G. “Heated Hydro-Mechanical Deep Drawing of Magnesium Sheet Metal” Magnesium Technology 2004 Luo A.A. TMS Warrendale, PA 2004 67 71
- Siegert K. Jaeger S. “Pneumatic Bulging of Magnesium AZ31 Sheet Metal at Elevated Temperatures” Magnesium Technology 2004 Luo A.A. TMS Warrendale, PA 2004 87 90
- General Motors Coropration Press Release “Aluminum Forming Enables Innovative Manufacturing” January 27 2004
- Stern A. Munitz A. Kohn G. “Application of Welding Technologies for Joining of Mg Alloys: Microstructure and Mechanical Properties” Magnesium Technology 2003 Kaplan H.I. TMS Warrendale, PA 2003 163 168
- Lathabai S. Barton K.J. Harris D. Lloyd P.G. Viano D.M. McLean A. “Welding and Weldability of AZ31B by Gas Tungsten Arc and Laser Beam Welding Processes” Magnesium Technology 2003 Kaplan H.I. TMS Warrendale, PA 2003 157 162
- Watkins K.G. “Laser Welding of Magnesium Alloys” Magnesium Technology 2003 Kaplan H.I. TMS Warrendale, PA 2003 153 156
- Johnson R. Threadgill P. “Friction Stir Welding of Magnesium Alloys” Magnesium Technology 2003 Kaplan H.I. TMS Warrendale, PA 2003 147 152
- Li N. Pan T.-Y. Cooper R. Houston D.Q. “Friction Stir Welding of Magnesium AM60 Alloy” Magnesium Technology 2004 Luo A.A. TMS Warrendale, PA 2004 19 23
- Skar J.I. Gjestland H. Oosterkamp L.D. Albright D.L. “Friction Stir Welding of Magnesium Die Castings” Magnesium Technology 2004 Luo A.A. TMS Warrendale, PA 2004 25 30
- Somasekharan A.C. Murr L.E. “Fundamental Studies of the Friction Stir Welding of Magnesium Alloys to 6061-T6 Aluminum” Magnesium Technology 2004 Luo A.A. TMS Warrendale, PA 2004 31 36
- Budde L. Bischoff J. Widder T. “Low-Temperature Joining of Magnesium-Materials in Vehicle Constructions” Magnesium Alloys and Their Applications Mordike B.L. Kainer K.U. Werkstoff-Informationsgesellschaft Frankfurt, Germany 1998 613 618
- Ashby M.F. “Performance Indices” ASM Handbook 20 ASM International Materials Park, OH 1998 281 290
- Hector A. Heiss W. “Magnesium Die-Castings as Structural Members in the Integral Seat of the New Mercedes-Benz Roadster” SAE Technical Paper No. 900798 SAE Warrendale, PA 1990
- Alexander D. “Intier Seats are Customer Driven” Automotive Engineering International May 2004 22 24
- Schumann S. Friedrich F. “The Use of Magnesium in Cars - Today and in Future” Magnesium Alloys and Their Applications Mordike B.L. Kainer K.U. Werkstoff-Informationsgesellschaft Frankfurt Germany 1998 3 13
- BMW “BMW Pushes Lightweight Technology with Magnesium” www.GermanCarFans.com July 21 2003
- Baril E. Labelle P. Fischersworring-Bunk A. “AJ(Mg-Al-Sr) Alloy System Used for New Engine Block” SAE Technical Paper No. 2004-01-0659 SAE Warrendale, PA 2004
- Powell B.R. Ouimet L.J. Allison J.E. Hines J.A. Beals R.S. Kopka L. Ried P.P. “The Magnesium Powertrain Cast Components Project: Part I - Accomplishments of Phase I and the Objectives and Plans for the Magnesium Engine in Phase II” Magnesium Technology 2004 Luo A.A. TMS Warrendale, PA 2004 3 10
- Fujita M. Sakate N. Hirahara S. Yamamoto Y. “Development of Magnesium Forged Wheel” SAE Technical Paper No. 950422 SAE Warrendale, PA 1995