This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Local Strain Measurement in a Strip Cast Automotive Aluminum Alloy Sheet
Technical Paper
2005-01-0492
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Local strain measurement based on digital image correlation at both macroscopic and microscopic scales is presented. A speckle pattern was used for the macroscopic strain mapping to reveal the inhomogeneous deformation processes occurring during tensile deformation of a strip cast automotive aluminum sheet. Moreover, a novel microscopic strain mapping technique based on scanning electron microscopic (SEM) topography image correlation was introduced for strain mapping down to the grain level. The SEM images taken from an in-situ tensile sample of the same material within a field emission SEM chamber are used to demonstrate the validity of the method. The results clearly reveal the evolution of local strain of order of one as well as the formation of shear band in the material.
Recommended Content
Technical Paper | The 1972 MODEL … I'd Like To Drive It |
Technical Paper | Development of High-Temperature Coatings and Applications |
Aerospace Material Specification | Plating, Brush, Chromium Hard Deposit, Trivalent |
Authors
- Jidong Kang - Department of Materials Science and Engineering, McMaster University
- David S. Wilkinson - Department of Materials Science and Engineering, McMaster University
- J. David Embury - Department of Materials Science and Engineering, McMaster University
- Mukesh Jain - Department of Mechanical Engineering, McMaster University
Topic
Citation
Kang, J., Wilkinson, D., Embury, J., and Jain, M., "Local Strain Measurement in a Strip Cast Automotive Aluminum Alloy Sheet," SAE Technical Paper 2005-01-0492, 2005, https://doi.org/10.4271/2005-01-0492.Also In
References
- Attwood, D.G. Hazzledine, P.M. A fiducial grid for high-resolution metallograph Metallography 1976 9 483 501
- Dally, J. Riley, W. Experimental stress analysis 1978 McGraw-Hill New York
- Li, C.S. Orlecky, L.J. Fiducial grid for measuring microdeformation ahead of fatigue crack tip near aluminum bicrystal interface Experimental Mechanics 1983 33 4 286 292
- Takeda, N. Evaluation of microscopic deformation in CFRP laminates with delamination by micro-grid methods Journal of Composite Materials 32 1 83 100
- Schroeter, B.M. McDowell, D.L. Measurement of deformation fields in polycrystalline OFHC copper International Journal of Plasticity 2003 19 1355 1376
- Post, D. Han, B. Ifju, P. High sensitivity Moiré: experimental analysis for mechanics and materials 1994 Springer-Verlag New York
- Han, B. Post, D. Ifju, P. Moiré interferometry for engineering mechanics: current practices and future developments Journal of Strain Analysis for Engineering Design 2001 36 1 101 117
- Peters, W.H. Ranson, W.F. Digital imaging techniques in experimental stress analysis Optical Engineering 1982 21 3 427 431
- Sutton, M.A. Wolters, W.J. Peters, W.H. Ranson, W.F. McNeil, S.R. Determination of displacements using an improved digital correlation method Image and Vision Computing 1983 1 3 133 139
- Sutton, M.A. Cheng, M. Peters, W.H. Chao, Y.J. McNeill, S.R. Application of an optimized digital correlation method to planar deformation analysis Image and Vision Computing 1986 4 3 143 150
- Bruck, H.A. McNeill, S.R. Sutton, M.A. Peters, W.H. III Digital image correlation using Newton-Raphson method of partial differential correlation Experimental Mechanics 1982 39 3 261 267
- Luo, P.F. Chao, Y.J. Sutton, M.A. Peters, W.H. III Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision Experimental Mechanics 1992 42 4 123 132
- Helm, J.D. McNeil, S.R. Sutton, M.A. Improved three-dimensional image correlation for surface displacement measurement Optical Engineering 1996 35 7 1911 1915
- Chiang, F.P. Wang, Q. Lehman, F. New developments in full field strain measurements using speckles Nontraditional Methods of Sensing Stress, Strain and Damage in Materials and Structures Lucas George F. Stubbs David A. American Society for Testing and Materials 1997 156 169
- Vendroux, G. Knauss, W.G. Submicron deformation field measurements: Part2. Improved digital image correlation Experimental Mechanics 1998 38 2 86 92
- Chasiotis, I. Knauss, W. A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy Experimental Mechanics 2002 42 1 51 57
- Knauss, W.G. Chasiotis, I. Huang, Y. Mechanical measurements at the micro and nanometer scales Mechanics of Materials 2003 35 217 231
- Zhang, N. Tong, W. An experimental study on grain deformation and interactions in an Al-0.5%Mg multicrystal International Journal of Plasticity 2004 20 523 542
- GOM mbH Aramis-Deformation measurement using the grating method User's Manual, V4.7.4-2 2001 Braunschweig, Germany
- Kang, J. Jain, M. Wilkinson, D.S. Embury, J.D. Microscopic strain mapping using SEM topography image correlation at large strain J. Strain Analysis for Engineering Design 2004
- Korbel, A. Embury, J.D. Hatherly, M. Martin, P.L. Erbsloh, H.W. Microstructural aspects of strain localization in Al-Mg alloys Acta Metallurgica 34 10 1986 1999 2009
- Kang, J. Jain, M. Wilkinson, D.S. Embury, J.D. Kim, S. Sachdev, A.K. Effect of strain path change on forming limits of strip cast automotive aluminum sheets A5754 Khan, A.S. Dislocations, Plasticity and Metal Forming, Proceedings of the Tenth International Symposium on Plasticity and Its Current Applications NEAT Press 2003 181 183
- Kang, J. Wilkinson, D.S. Jain, M. Embury, J.D. Beaudoin, A.J. Kim, S. Mishira, R. Sachdev, A.K. On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA5754 Acta Materialia 2004
- Marciniak, Z Duncan, J.L. Hu, S.J. Mechanics of sheet metal forming 2002 Butterworth-Heinemann Oxford, UK