This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Damage and Formability of AKDQ and High Strength DP600 Steel Tubes
Technical Paper
2005-01-0092
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Using standard tensile testing methods, the material properties of AKDQ and DP600 steels tubes along the axial direction were determined. A novel in-situ optical strain mapping system ARAMIS® was utilized to evaluate the strain distribution during tensile testing along the axial direction. Microstructural and damage characterization was carried out using microscopy and image analysis techniques to compare the damage evolution and formability of both materials. Failure in both steels was observed to occur via a ductile failure mode. AKDQ was found to be the more formable material as it can achieve higher strains, total elongations and thinning prior to failure than the higher strength DP600.
Recommended Content
Authors
Topic
Citation
Winkler, S., Bardelcik, A., Worswick, M., Ososkov, Y. et al., "Damage and Formability of AKDQ and High Strength DP600 Steel Tubes," SAE Technical Paper 2005-01-0092, 2005, https://doi.org/10.4271/2005-01-0092.Also In
References
- Singh Harjinder Fundamentals of Hydroforming Society of Manufacturing Engineers 2003
- Mortimer J. BMW Breaks New Ground With Hydroforming Assembly Automation 21 4 2001
- Trana K. Finite Element Simulation of the Tube Hydrofroming process- Bending, preforming and Hydroforming Journal of Materials Processing Technology 127 401 408 2002
- Yang J. Jeon B. Oh S. The Tube Bending Technology of a Hydroforming Process for an Automotive Part Journal of Materials Processing Technology 111 175 181 2001
- Dwyer N. Worswick M.J. Gholipour J. Xia C. Khodayari G. Pre-bending and Subsequent Hydroforming of Tube: Simulations and Experiment Proceedings Numisheet 2002 Korea 2002
- Normani F. University of Waterloo
- Dyment J. University of Waterloo
- Bardelcik A. Worswick M.J. Numerical Investigation into the Effects of Bending Boost and Hydroforming Endfeed on the Hydroformability of DP600 Tube SAE 2005
- ARAMIS ® v.4.7 Manual GOM mbH Braunschweig, Germany 2001
- Ososkov Y. Inal K. Jain M.K. Wilkinson D.S. Neale K.W. Experimental and FEA Investigation of Tensile Behaviour of High Strength Dual-Phase DP600 steel SAE 2005 Detroit, MI 2005
- Ososkov Y. Jain M.K. Wilkinson D.S. Project AUTO 21: Internal report McMaster University 2003