This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Reduction of Springback in V-Bending by a Reverse Bend Approach
Technical Paper
2005-01-0087
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The deformation mechanics of springback phenomenon in the V-bending of sheets was investigated by the finite element analysis. The axial stress distribution in the bent sheet was classified into three zones: the bending zone under the punch corner (zone I), unbending zone next to the bending zone (zone II), and the stress-free zone (zone III). The effects of the stress distributions in these three zones on the springback were examined in detail, and it was found that the stress distribution in zone 2 plays an important role in reducing the springback. A reverse bend approach was also proposed to reduce the springback in the V-bending process. The efficiency of the proposed approach was demonstrated by the finite element simulations, and was validated as well by the experiments conducted in the present study.
Recommended Content
Authors
Citation
Chen, F. and Ko, S., "Reduction of Springback in V-Bending by a Reverse Bend Approach," SAE Technical Paper 2005-01-0087, 2005, https://doi.org/10.4271/2005-01-0087.Also In
References
- Schroeder, W. Mechanics of sheet-metal bending Trans ASME 65 1943 817 827
- Martin, G. Tang, S. The plastic bending of beams considering die friction effects J. Eng. Ind 88 1966 237 250
- Yu, T. X. Johnson, W. Influence of axial force on elastic-plastic bending and springback of a beam J. Mech. Working Tech 6 1982 5 21
- Hill, R. The mathematical theory of plasticity Oxford University Press 1950
- Davies, R. G. Chu, C. C. Liu, Y. C. Recent progress on the understanding of springback Computer Modeling of Sheet Metal Forming Process Wang N. M. Tang, S. C. The Metallurgical Society USA 1985 259 271
- Chu, C. C. The effect of restraining force on springback Int. J. Solids in Structure 27 1991 1035 1046
- Asnafi, N. Springback and fracture in V-die air bending of thick stainless steel sheets Material and Design 21 2000 217 236
- Liu, Y. C. Springback reduction in U-channels: double-bend technique J. App. Metal 3 1984 148 156
- Nagai, Y. High precision U-bending technique for moderately thick plate JSTP 28 1987 143 149
- Wang, C. Kinzel, G. Altan, T. Mathematical modeling of plane-strain bending of sheet and plate J. Mater. Processing Tech 39 1993 279 304