This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Stochastic Model for the Investigation of the Influence of Turbulent Mixing on Engine Knock
Technical Paper
2004-01-2999
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A stochastic model based on a probability density function (PDF) was developed for the investigation of different conditions that determine knock in spark ignition (SI) engine, with focus on the turbulent mixing. The model used is based on a two-zone approach, where the burned and unburned gases are described as stochastic reactors. By using a stochastic ensemble to represent the PDF of the scalar variables associated with the burned and the unburned gases it is possible to investigate phenomena that are neglected by the regular existing models (as gas non-uniformity, turbulence mixing, or the variable gas-wall interaction). Two mixing models are implemented for describing the turbulent mixing: the deterministic interaction by exchange with the mean (IEM) model and the stochastic coalescence/ dispersal (C/D) model. Also, a stochastic jump process is employed for modeling the irregularities in the heat transfer. Parameter studies are carried out in order to assess the influence of the turbulence intensity and of the fluctuations in the gas - wall interactions.
Recommended Content
Authors
Citation
Gogan, A., Sundén, B., Lehtiniemi, H., and Mauss, F., "Stochastic Model for the Investigation of the Influence of Turbulent Mixing on Engine Knock," SAE Technical Paper 2004-01-2999, 2004, https://doi.org/10.4271/2004-01-2999.Also In
References
- 1. Stenlåås, O. Gogan, A. Egnell, R. Sundén, B. Mauss, F. “The Influence of Nitric Oxide on the Occurrence of Autoignition in the End Gas of Spark Ignition Engines” SAE 2002-01-2699
- Kraft, M. Stochastic Modelling of Turbulent Reacting Flow in Chemical Engineering 1998 1 109 VDI Verlag
- Cowart, J.S. Keck, J.C. Heywood, J.B. Westbrook, C.K. Pitz, W.J. 1990 “Engine Knock Predictions Using a Fully detailed and a Reduced Chemical Kinetic Mechanism” Proc. Combust. Inst. 23 1055 1062
- Wilk, R.D. Pitz, W.J. Westbrook, C.K. Addagarla, S. Miller, D.L. Cernansky, N.P. Green, R.M. 1990 “Combustion of n-butane and iso-butane in an internal combustion engine: a comparison of experimental and modeling results” Proc. Combust. Inst. 23 1047 1055
- Hajireza, S. Mauss, F. Sunden, B. 1998 “Two- Zone Model of Gas Thermodynamics State in SI Engines with Relevance for Knock” COMODIA 98 203 208
- Maigaard, P. Mauss, F. Kraft, M. 2003 Homogeneous Charge Compression Ignition Engines: A Simulation Study on the Effect of Inhomogeneities ASME J. Engineering for Gas Turbines and Power 125 466 471
- Kraft M. Maigaard P. Mauss F. Christensen M. Johansson B. 2000 Investigation of Combustion Emissions in a Homogeneous Charge Compression Ignition Engine: Measurements and a New Computational Model Proc. Combust. Inst. 28 1195 1201
- Bhave, A. Balthasar, M. Kraft, M. Mauss, F. 2004 “Analysis of a Natural Gas Fuelled HCCI Engine with Exhaust Gas Recirculation Using a Stochastic Reactor Model” International Journal of Engine Research, SAE Int. J. Engine Research 5 1 93 104
- Montorsi, L. Mauss, F. Bianchi, G. M. Bhave, A. Kraft, M. 2003 Analysis of the HCCI Combustion of a Turbocharged Truck Engine Using a Stochastic Reactor Model ASME ICE Division
- Bhave, A. Kraft, M. Montorsi, L. Mauss, F. “Modelling a Dual-fuelled Multi-cylinder HCCI Engine Using a PDF based Engine Cycle Simulator SAE 2004-01-0561
- Bood, J. Bengtsson, P.E. Mauss, F. Burgdorf, K. Denbratt, I. “Knock in Spark-Ignition Engines: End-Gas Temperature Measurements Using Rotational CARS and Detailed Kinetic Calculations of the Autoignition Process” SAE 971669
- Grandin, B. Denbratt, I. Bood, J. Brackmann, C. Bengtsson, P.E. “Thermal Boundary Layer Investigation Using CARS Temperature Measurements and Heat Flux Measurements SAE 2000-01-2831
- Grandin, B. Denbratt, I. Bood, J. Brackmann, C. Bengtsson P. E. Gogan, A. Mauss, F. Sunden, B. “Heat Release in the End-Gas Prior to Knock in Lean, Rich and Stoichiometric Mixtures With and Without EGR” SAE 2002-01-0239
- Grandin, B. Denbratt, I. Bood, J. Brackmann, C. Bengtsson, P.E. 2002 “A Study of the influence of EGR and Stoichiometry on the Heat Release in the End-gas Prior to Knock using Rotational CARS Thermometry” J. of Engine Research 3 4 209 223
- Gogan, A. Lehtiniemi, H. Sundén, B. Mauss, F. Stochastic Model for the Investigation of the Effect of Inhomogeneities on Engine Knock” ASME ICEF2004-929
- Gogan, A. Sundén, B. Montorsi, L. Ahmed, S.S. Mauss, F. Knock Modeling: an Integrated Tool for Detailed Chemistry and Engine Cycle Simulation SAE 2003-01-3122
- Heywood, J. B. 1988 “Internal Combustion Engine Fundamentals” McGraw Hill New York
- Tabaczynski, R. 1976 “Turbulence and Turbulent Combustion in Spark-Ignition Engines” Prog. Energy Combust. Sci. 2 143 165
- Pope, S. B. PDF Methods for Turbulent Reactive Flows 1985 Prog. Energy. Combust. Sci. 11 119 192
- Curl, R. L. Dispersed Phase Mixing: I. Theory and Effects in Simple Reactors A.I.Ch.E. Journal 9 2 175 181 1963
- Ahmed, S.S. Blurock, E. Mauss, F. 2003 “Detailed Mechanism for Heptane and Isooctane Relevant for HCCI Engine Calculations” Joint Scandinavian-Nordic and Italian Sections of the Combustion Institute Italy