This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hardware-In-the-Loop (HIL) Testing of ESP (Electronic Stability Program) Commercial Hydraulic Units and Implementation of New Control Strategies
Technical Paper
2004-01-2770
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Firstly, the paper presents Politecnico di Torino Hardware-in-the-Loop (HIL) brake systems test bench. Secondly, it describes in detail all the necessary basic tests to characterize, on the bench, an ESP hydraulic unit: for example, step response of each valve, measurement of pressure limiter valves calibration, step response of motor pump unit. The experimental results are reported.
Thirdly, the paper deals with the frequency response of ESP valves, by using Pulse Width Modulation. Pressure gradients and pressure oscillations obtained in the tests are commented in detail.
An open loop actuation strategy for ESP is presented, permitting to obtain, in each condition, the desired wheels pressure levels, without having any output pressure sensor in the hydraulic unit. This strategy was conceived by simulation and then successfully tested on the bench.
An ESP control strategy, complete of a diagnostic algorithm, was added to the actuation logic described before and tested on the bench.
Recommended Content
Authors
Topic
Citation
Sorniotti, A. and Velardocchia, M., "Hardware-In-the-Loop (HIL) Testing of ESP (Electronic Stability Program) Commercial Hydraulic Units and Implementation of New Control Strategies," SAE Technical Paper 2004-01-2770, 2004, https://doi.org/10.4271/2004-01-2770.Also In
SAE 2004 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V113-6; Published: 2005-07-05
Number: V113-6; Published: 2005-07-05
References
- Velardocchia Sorniotti, ‘A Failsafe Strategy for a Vehicle Dynamics Control (VDC) System’ SAE 2004-01-190
- Van Zanten Erhardt Pfaff ‘VDC, the Vehicle Dynamics Control System of Bosch’ SAE 950759
- Ding, Fennel ‘A Model-Based Failsafe System for the Continental Teves Electronic Stability Program (ESP)’ SAE 2000-01-1635
- Velardocchia, Morgando, Sorniotti, ‘Four-wheel-steering Control Strategy and its Integration with Vehicle Dynamics Control and Active Roll Control’ SAE 2004-01-1061
- Sorniotti, Morgando Velardocchia, M. ‘Vehicle Dynamics Control based on Yaw Rate and Sideslip Angle’ EAEC Conference 2003 Paris C 202
- Limpert, ‘Brake Design and Safety’ SAE International 2000
- Fortina, Velardocchia, Sorniotti, ‘Braking Systems Components Modelling’ SAE 2003-01-3335
- ‘Automotive Brake Systems’ Robert Bosch GmbH, 1995 SAE International
- Morgando, Sorniotti, Velardocchia, ‘Linear and Non-Linear Approach to Vehicle Dynamics’ AIMETA 2003 Ferrara