This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Limiting Conditions for Flammability of Polymers
Technical Paper
2004-01-2284
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Limiting oxygen index (LOI) is commonly used to evaluate flammability of polymers. The accepted test standards are ASTM G 125 and D 2863. The data provided by these standards, however, may not correlate closely with many real-life fire scenarios. Two of the most common issues are the direction of flame propagation recommended by the standard method and the test environment temperature. The standard test methods recommend testing samples at room temperature and in a downward flame propagation mode. Modifications of these two parameters could render most polymers flammable; however, these same polymers would, under standard testing conditions set forth by ASTM G 125 and D 2863, be considered nonflammable. In this study, standard and modified LOI tests were conducted on 16 polymers to determine the magnitude of these effects. The results indicate that the LOI data commonly presented in the literature should be used with caution. Potential applications for next-generation flight vehicles, such as the Crew Exploration Vehicle (CEV), include optimization of materials selection from a flammability standpoint. In addition, the method would generate data useful under various spacecraft oxygen and temperature conditions, and allow quantitative flammability correlations between normal gravity and microgravity or partial gravity conditions.
Recommended Content
Technical Paper | Biofilm Formation and Control in a Simulated Spacecraft Water System: Interim Results |
Technical Paper | Concept of Waste Transferring Mechanisms |
Technical Paper | Design and Development of a Space Station Cell Culture Unit |
Authors
- David Hirsch - Honeywell Technology Solutions, NASA Johnson Space Center White Sands Test Facility
- Sam Motto - Honeywell Technology Solutions, NASA Johnson Space Center White Sands Test Facility
- Fu-Yu Hshieh - Honeywell Technology Solutions, NASA Johnson Space Center White Sands Test Facility
- Harold Beeson - NASA Johnson Space Center White Sands Test Facility
Citation
Hirsch, D., Motto, S., Hshieh, F., and Beeson, H., "Limiting Conditions for Flammability of Polymers," SAE Technical Paper 2004-01-2284, 2004, https://doi.org/10.4271/2004-01-2284.Also In
References
- Arcand, C. G. Vullo, G. L. Jr. 1972 “The Bottom Ignition Oxygen Index Test,” Textile Research Journal 42 6 328 330
- Hirsch, D. B. Beeson, H. D. March 2002 “Test Method to Determine Flammability of Aerospace Materials,” Journal of Testing and Evaluation , JTEVA 30 2 156 159
- Sevecek, P. Filipi, B. Zapletalova, I. 1981 “Modification of the Oxygen Index Test for Better Evaluation of the Relative Flammability,” Fire and Materials 5 1
- Benning, M. A. 1983 “Measurement of Oxygen Index at Elevated Pressure,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres, ASTM STP 812 Werley B. L. ASTM 68 83
- Routley, A. F. Ludlam, N. P. 1982 “An Investigation of the Variation of Oxygen Index of Materials with Changes in Pressure,” Fire and Materials 6 1 23 26
- Hirsch, D. B. Bunker, R. L. 1993 “Effects of Diluents on Flammability of Nonmetals in High-pressure Oxygen Mixtures,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Sixth Volume, ASTM STP 1197 Janoff D. D. Stoltzfus J. M. ASTM 74 80
- Bulewicz, E. M. 1976 “Some Notes on the Oxygen Index and Inflammability Limits,” Archiwum Termodynamiki I Spalania 7 2 175 190
- DiPietro, J. Stepniczka, H. February 1971 “Factors Affecting the Oxygen Index Flammability Ratings,” SPE Journal 27 23 31
- Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) American Society for Testing of Materials West Conshohocken, PA 2000
- Hirsch, D. Motto, S. Beeson, H. Pedley, M. 2003 “Issues related to the Flammability Assessment of Polymers for Hazard Analyses of Oxygen Systems,” Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Tenth Volume, ASTM STP 1454 Steinberg T. A. Beeson H. D. Newton B. E. ASTM International West Conshohocken, PA 21 26
- Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants American Society for Testing of Materials West Conshohocken, PA 2000