This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Combined NOx and PM Exhaust Gas Aftertreatment Approaches for HSDI Diesel Engines
Technical Paper
2004-01-1425
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
While particulate filters are already being used in increasing numbers with production HSDI (High Speed Direct Injection) Diesel powertrains, combined NOx and PM reducing devices are still in the development phase. In the past, various lean NOx trap (LNT) applications using internal and external measures to enable enrichment of stoichiometric exhaust gas have been investigated. Some initial results on the integration of LNT and catalytic Diesel Particulate Filter (cDPF) functionality into HSDI powertrains have already been published, and systems consisting of a cDPF and LNT on separate bricks, as well as one brick solutions have been described without being directly compared.
In the present paper a system comparison of various exhaust gas aftertreatment system architectures in combination with a prototype engine designed to fulfil future emissions legislation at lowest CO2 levels performed at AVL is described.
Location of the LNT both up- and downstream of the cDPF and the performance of a single brick 4-Way Catalyst (4-WC) were investigated. With selected exhaust gas aftertreatment devices, fuel enrichment has been assessed using three different approaches: Internal rich combustion, external fuel injection (exhaust port) and fuel evaporation upstream of the exhaust aftertreatment device. Prototype fuel injection devices have been set up to demonstrate the advantages and disadvantages for production application.
The main focus of the investigations of the different systems was their impact on NOx conversion efficiency, desulfurization and cDPF regeneration capability. Furthermore, the interaction of the cDPF and LNT and their performance under lean and lean/rich conditions were investigated. Finally, a detailed assessment of the compared systems was performed and a possible combination of NOx and PM reduction device with alternative combustion was considered.
Recommended Content
Authors
Topic
Citation
Herrmuth, H., Cartus, T., Ducellari, R., and Derschmidt, O., "Combined NOx and PM Exhaust Gas Aftertreatment Approaches for HSDI Diesel Engines," SAE Technical Paper 2004-01-1425, 2004, https://doi.org/10.4271/2004-01-1425.Also In
Diesel Emissions on CD-ROM from the SAE 2004 World Congress
Number: SP-1835CD; Published: 2004-03-08
Number: SP-1835CD; Published: 2004-03-08
References
- Schmidt's Diesel Car Prospects 2007
- Moser F. et. al. “Development Directions for Passenger Cars and Commercial Vehicle Engines” SIAR 2003 Pune, India
- Ellinger R. et. al. “CO2 Reduction Potential of an Advanced Diesel Combustion Engine in an Advanced Passenger Car Powertrain” EAEC 2003 Paris
- Weissbäck M. et. al. “Alternative Combustion - An Approach for Future HSDI Diesel Engines” MTZ 9 2003
- Pfahl U. et al. “Passenger Car Investigations of NO x Adsorber and DPF Combination to Fulfill Future Diesel Emission Limits” SAE 2003-01-0043
- Tanaka, T. “Simultaneous Reduction of PM and NO x - A New Aftertreatment System -” 22 nd International Vienna Motor Symposium 2001
- Fujimura T. et. al. “Development towards serial production of a Diesel passenger car with simultaneous reduction system of NO x and PM for the European Market” 23 rd International Vienna Motor Symposium 2002
- McDonald J. Bunker B. “Testing of the Toyota Avensis DPNR at U.S. EPA-NVFEL” SAE 2002-01-2877
- Cartus T. et. al. “The clean and efficient HSDI-diesel using NO x -adsorber technology” 21 st International Vienna Motor Symposium 2000
- Harndorf H. et. al. “Partikelfilter- und NO x -Speichertechnologie als EURO IV-Option für Dieselmotoren” Forum Partikel Emissionen 2002
- Sluder, C. S. West B. H. “Effects of Regeneration Conditions NO x Adsorber Performance” SAE 2002-01-2876