This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dynamic Simulation of Nonlinear Model-Based Observer for Hydrodynamic Torque Converter System
Technical Paper
2004-01-1228
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
It is well-known that the hydrodynamic torque converter plays a major role in the transient study of power train systems since it has a great influence on the transient characteristics of a vehicle during gear shifting as well as vehicle launching. To predict accurately the vehicle characteristics, detailed analysis of the hydrodynamic torque converter is required. However, even with the development of a nonlinear dynamic model for the torque converter based on Hrovat and Tobler's paper (1985) is available, it is imperative to calculate both torques from impeller and turbine in order to utilize the dynamic model since it takes torque as an input [3]. In order to obtain the information about necessary but unmeasurable variables, nonlinear model-based estimator is developed using already available and measurable speeds data of impeller and turbine. The hydrodynamic torque converter model includes all necessary dynamics, namely, hydraulic as well as mechanical dynamics. This model was developed and implemented using Matlab/Simulink®, and was validated against the vehicle experimental data [10]. With the validated model, nonlinear model-based estimator is developed to calculate the impeller and turbine torques.
The principle contribution of this work is the design of nonlinear model-based estimator using the sliding mode observer for a hydrodynamic torque converter, which later can be used for studies of power train transient effects as well as transmission related control. Even though the dynamic torque converter has been available, there has not been any torque estimator available despite the benefit of using such a dynamic model based torque estimator. The benefit of the dynamic model-based estimator for torque can be seen from figures 7 and 8 with the help of comparison against the torque estimation using steady-state characteristics of torque converter. In addition, with the use of the developed dynamic model-based estimator, torque which is one of the essential variables in terms of control can be accurately estimated compared to the existing static look-up based torque estimator. The resulting nonlinear model-based estimator with the hydrodynamic torque converter will help study the transient study of power train systems by providing physically justified model for engine and vehicle behavior when driven by large signal variations in either engine net torque output or vehicle load. In addition to the power train study, this model will be very useful for shift control and control of converter clutch applications.
Recommended Content
Citation
Lee, J. and Lee, H., "Dynamic Simulation of Nonlinear Model-Based Observer for Hydrodynamic Torque Converter System," SAE Technical Paper 2004-01-1228, 2004, https://doi.org/10.4271/2004-01-1228.Also In
References
- Minowa, T. Kimura, H. Ishii, J. Morinaga, S. Shiraishi, T. Ozaki, N. “Smooth Gear Shift Control System Using Estimated Torque,” SAE Technical Paper , Number 941013 1994
- Ibamoto, M. Kuroiwa, H. Minowa, T. Sato, K. Tsuchiya, T. “Development of Smooth Shift Control System with Output Torque Estimation,” SAE Technical Paper , Number 950900 1995
- Hrovat, D. Tobler, W. E. “Bond Graph Modeling and Computer Simulation of Automotive Torque Converters,” Journal of the Franklin Institute 319 ½ 93 114 1985
- Rizzoni, G. Srinivasan, K. “ME781: Powertrain Dynamics Class Notes,” Engineering Publications, The Ohio State University September 2000
- Xia, H Oh, P. “A dynamic model for automotive torque converters,” Int. J. Vehicle Design 21 4 5 344 354
- Tugcu, A. K. Hebbale, K. V. Alexandridis, A. A. Karmel, A. M. “Modeling and Simulation of the Powertrain Dynamics of Vehicles Equipped with Automatic Transmission,” Proceedings of Symposium on Simulation of Ground Vehicles and Transportation Systems ASME AMD 80 DSC 2 39 61 Anaheim December 1986
- Kim, D. Shin, B. Yi, K. Lee, K. “Vehicle Driving Load Estimation for Longitudinal Motion Control,” Seoul 2000 FISITA World Automotive Congress Seoul, Korea June 12-15 2000
- Shin, B. Hahn, J. Lee, K. “Development of Shift Control Algorithm Using Estimated Turbine Torque,” SAE Technical Paper Number 2000-01-1150 2000
- Utkin, V. I. Sliding Modes in Control Optimization Springer-Verlag 1992
- Lee, J. “Control Oriented Modeling and Simulation of Dynamic Torque Converter Using Torque Estimator,” American Control Conference 2004
- Xiong, Y. Saif, M. “Sliding-mode Observer For Uncertain Systems, Part II: Nonlinear Systems Case,” Proceedings of the 39 th IEEE , Conference on Decision and Control Sydney, Australia December 2000
- Lee, J. Ph.D. Dissertation Proposal Department of Mechanical Engineering, The Ohio State University 2003
- Waters, W. “General Purpose Automotive Vehicle Performance and Economy Simulator” SAE 720043 1972