This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effects of Microstructure and Aging Property on Formability in ERW Steel Tubes for Automobile Structural Parts
Technical Paper
2004-01-0829
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
From the viewpoint of applying electric resistance welded (ERW) steel tubes for automobile structural parts, the formability degradation of steel sheets in a series of forming steps is investigated. Sheets are subjected several forming steps, such as a roll-forming into tubes, pre-forming, bending and bulge-forming. The formability degradation highly depends on the microstructure and aging property. Deterioration of the formability of sheets is diminished by the existence of the second phase in the ferrite matrix. The formability degradation of the steel sheet having an aging index (A.I.) ≤10MPa is well restrained so that the tube shows a much higher elongation and expanding ratio on bulge forming than the tube having A.I.>10MPa. These phenomena are applicable to all the tubes of tensile strength level form 290MPa to over 590MPa.
Recommended Content
Authors
- Shunsuke Toyoda - Steel Research Lab., JFE Steel Corp.
- Yoshikazu Kawabata - Steel Research Lab., JFE Steel Corp.
- Koji Suzuki - Steel Research Lab., JFE Steel Corp.
- Kei Sakata - Steel Research Lab., JFE Steel Corp.
- Satoru Yabumoto - Chita Works, JFE Steel Corp.
- Makio Gunji - Chita Works, JFE Steel Corp.
- Akio Sato - Chita Works, JFE Steel Corp.
Citation
Toyoda, S., Kawabata, Y., Suzuki, K., Sakata, K. et al., "Effects of Microstructure and Aging Property on Formability in ERW Steel Tubes for Automobile Structural Parts," SAE Technical Paper 2004-01-0829, 2004, https://doi.org/10.4271/2004-01-0829.Also In
References
- Fuchizawa S. Proc. of International Seminar on Recent Status & Trend of Tube Hydroforming TOKYO 1999 40
- Abe H. Proc. of the TUBEHYDRO 2003 AICHI 2003 42
- Miyauchi K. J. of JSTP 9 1968 93 729
- Suzuki K. Uwai K. Toyoda S. Yu Q. Shiratori M. Mori T. Proc. Int. Joint Symposium of JSTP ISIJ and ITA OSAKA 2000 238
- Toyoda S. Uwai K. Suzuki K. Saito T. Yoshitake A. Mori T. SAE Technical Paper No. 01-0027 1999
- Tanikawa K. Hosoya Y. Koike; T. NKK Technical Review 72 1995 10