This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The GIE S2A Full-Scale Aero-acoustic Wind Tunnel
Technical Paper
2004-01-0808
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The GIE S2A is a complex comprising a full-scale aeroacoustic wind tunnel, a 2/5-scale model wind tunnel, and supporting infrastructure. The entire facility is a joint project of Renault, PSA Peugeot-Citroën, and the national education and research establishment, CNAM. This paper provides an overview of the history, design features and philosophy, commissioning results, and key instrumentation for the full-scale aero-acoustic wind tunnel, known as the S2A 1/1.
Recommended Content
| Technical Paper | Motorsports Education and the Education Community |
| Technical Paper | The Development History of The Space Saver Spare |
| Technical Paper | Machine Learning with Decision Trees and Multi-Armed Bandits: An Interactive Vehicle Recommender System |
Authors
Topic
Citation
Waudby-Smith, P., Bender, T., and Vigneron, R., "The GIE S2A Full-Scale Aero-acoustic Wind Tunnel," SAE Technical Paper 2004-01-0808, 2004, https://doi.org/10.4271/2004-01-0808.Also In
SAE 2004 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V113-6; Published: 2005-07-05
Number: V113-6; Published: 2005-07-05
References
- Elena, L. Gilliéron P. Gonzalez A-C M. Maillard V. Sagnard Y. “Souffleries Aéroacoustiques (GIE S2A) & Centre National de Rechaerche Technologique ‘Aérodynamique et Aéroacoustique des Véhicules Terrestres’” AAAS Conference June 2002
- Larose, G.L. Tanguay B. Van Every D. Bender T. “The New Boundary Layer Control System for NRC's 9m x 9m Wind Tunnel” AIAA paper AIAA-2001-0455 2001
- Wiedemann, J. Potthoff J. “The New 5-Belt Road Simulation System of the IVK Wind Tunnels - Design and First Results” SAE paper 2003-01-0429 2003
- Wickern, G. Dietz, S. Luehrmann L. “Gradient Effects on Drag Due to Boundary-Layer Suction in Automotive Wind Tunnels” SAE Paper 2003-01-0655 2003
- Rennie, M. “Effect of Jet Length on Pressure Fluctuations in ¾ Open-Jet Wind Tunnels” Motor Industry Research Association, Vehicle Aerodynamics Symposium October 2000
- Rennie, M. Kim M-S Lee J-H Kee J-D “Suppression of Open-Jet Pressure Fluctuations in the Hyundai Aeroacoustic Wind Tunnel” SAE Paper 2004-01-0803 2004
- Holthusen, H. Kooi J.W. “Model and Full Scale Investigations of the Low Frequency Vibration Phenomenon of the DNW Open Jet,” 1997
- Wickern, G. von Heesen W. Wallmann S. “Wind Tunnel Pulsations and their Active Suppression” SAE 2000-01-0869 2000
- Arnette, Stephen A. Buchanan T.D. Zabat M. “On Low-Frequency Pressure Pulsations and Static Pressure Distribution in Open Jet Automotive Wind Tunnels,” SAE Paper 1999-01-0813 1999
- Lacey, John “A Study of the Pulsations in a ¾ Open Jet Wind Tunnel,” SAE Paper 2002-01-0251 2002
- Lacey, John “Further Tests of a Non-Resonant Configuration” SAE Paper 2003-01-0425 2003
- Ahuja, K. K. Massey K.C. D'Agostino M.S. “Flow/Acoustic Interactions in Open-Jet Wind Tunnels,” AIAA Paper 97-1691 1997
- Bender, T. “The New Lola Cars 50% Scale Aerodynamic Wind Tunnel” SAE paper 2000-01-3547 2000
- Goodyer, M.J. “The Evolution of Modern High Sensitivity Yawmeters” AIAA paper, AIAA2002-2924 2002