This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Prediction of Camshaft Torque and Timing Chain Load for Turbo Direct Injection Diesel Engine
Technical Paper
2004-01-0611
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The fluctuation of the crankshaft rotational speed of a turbo supercharged direct-injection diesel (hereafter called i-CTDi) engine is large, causing the timing chain load and the valve train driving torque to increase.
To overcome this, a simulation method that enables the timing chain load and the valve train driving torque to be predicted while taking account of the fluctuation of the crankshaft rotational speed was established. In this simulation, all of the moving parts centered about the crankshaft were coupled, and an engine in a working condition was faithfully constructed in the computer. In the construction of the model, the issue of the conflicting topics of securing accuracy and reducing computing time was solved by looking at the frequency response of each part and adopting a simple model.
As a result, it was possible to predict both the timing chain load and the valve train driving torque with high accuracy and in a short time. Also, this virtual engine was able to contribute to the optimum design of the actual valve train and timing chain.
Recommended Content
Authors
Citation
Takagishi, H., Shimoyama, K., and Asari, M., "Prediction of Camshaft Torque and Timing Chain Load for Turbo Direct Injection Diesel Engine," SAE Technical Paper 2004-01-0611, 2004, https://doi.org/10.4271/2004-01-0611.Also In
Compression Ignition and Spark Ignition Power Cylinder Systems
Number: SP-1820; Published: 2004-03-08
Number: SP-1820; Published: 2004-03-08
References
- Takagishi, H. Sugawara, H. Prediction of Chain Load in Timing Chain System HONDA R&D Technical review 14 1
- Sopouch, M. Hellinger, W. Priebsch, H.H. Simulation of Engines Structure Borne Noise Excitation due to the Timing Chain Drive SAE paper 2002-01-0451
- Kubo A. Umezawa K. Research on Load Transmission Characteristics of Cylindrical Gears with Deviation (1 st Report, Basic Principles) Transactions of the Japan Society oh Mechanical Engineers (3 rd Dept.) 43 371 2771 2783 1977-7
- Hellinger, W. Priebsch, H. H. Rainer, G. Ph. Auslegung von Ventiltrieben für Hochleistungsmotoren - Rechnerische und Experimentelle Verfahren 16. Internationales Wiener Motorensymposium 19954