This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Cooling Time on Fracture Toughness at the Simulated HAZ of DP600 Steels
Technical Paper
2004-01-0165
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this study, the Gleeble test was used to investigate the effect of cooling time, which is an indication of welding heat input, on fracture toughness at the simulated HAZ of different test materials, including one mild steel and three DP600 steels from three different suppliers. One of the important findings is that the three DP600 steels have similar tensile properties and similar base metal microstructures. After different simulated welding thermal cycles, however, the microstructure, the microhardness and thus the fracture toughness of the simulated HAZ of the steels showed significant variations among the steels tested, which indicates that DP600 steels from different suppliers can have different responses to the welding heat input.
Citation
Chiang, J. and Jiang, C., "Effect of Cooling Time on Fracture Toughness at the Simulated HAZ of DP600 Steels," SAE Technical Paper 2004-01-0165, 2004, https://doi.org/10.4271/2004-01-0165.Also In
Innovations in Steel Sheet and Bar Products and Processing, and Modelling and Testing of Steel Structures
Number: SP-1837; Published: 2004-03-08
Number: SP-1837; Published: 2004-03-08
References
- Uchihara M. et al “Effects of Metallurgical Properties on Fatigue Limit of Arc-welded Sheet Steel,” Journal of the Iron and Steel Institue of Japan 86 5 336 342 2000
- Wu Q. et al “Fracture Toughness and Resistance to Fatigue Crack Growth of Three Vessel Steel Welded Joints with Different Welding Parameters,” Science Press 1984 455 460
- Wolfgang B. “Fracture Toughness of Manual Metal-arc and Submerged-arc Welded Joints in Normalized Carbon-manganese Steels,” ASTM Special Technical Publications 1990 272 299
- Buirette C. et al “Microstructural Effects on Short Fatigue Crack Initiation and Propagation in High Strength Steel Butt Welded Joints,” Welding in the World 41 1 1998 37 48
- 2002
- Chiang John “Ford Frame Welding Design Guide” 2002 31 43