This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Computational Study of the Effects of the Re-entrant Lip Shape and Toroidal Radii of Piston Bowl on a HSDI Diesel Engine's Performance and Emissions
Technical Paper
2004-01-0118
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The piston bowl design is one of the most important factors that affect the air/fuel mixing and the subsequent combustion and pollutant formation processes in a direct injection diesel engine. The bowl geometry and dimensions, such as pip region, bowl lip area, and torus radius are all known to have an effect on the in-cylinder mixing and combustion process. In order to understand better the effect of torus radius, three piston bowls with different torus radius and lip shapes designs but with the same lip area and pip inclination were investigated using Computational Fluid Dynamics (CFD) engine modelling. KIVA3V with improved sub-models was used to model the in-cylinder flows and combustion process, and it was validated on a High-Speed Direct Injection (HSDI) engine with a 2nd generation common rail fuel injection system. The engine's performance, in-cylinder flow and combustion, and emission characteristics were analysed at maximum power and maximum torque conditions and a part-load operating conditions. Three injector protrusions and injection timings were investigated at full load and a part load conditions.
Recommended Content
Authors
Topic
Citation
Zhu, Y., Zhao, H., Melas, D., and Ladommatos, N., "Computational Study of the Effects of the Re-entrant Lip Shape and Toroidal Radii of Piston Bowl on a HSDI Diesel Engine's Performance and Emissions," SAE Technical Paper 2004-01-0118, 2004, https://doi.org/10.4271/2004-01-0118.Also In
Diesel Emissions on CD-ROM from the SAE 2004 World Congress
Number: SP-1835CD; Published: 2004-03-08
Number: SP-1835CD; Published: 2004-03-08
References
- Middlemiss, I. D. Characteristics of the Perkins ‘Squish Lip’ Direct Injection Combustion System SAE paper 780113 1978
- Saito, T. Daisho, Y. Uchida, N. Ikeya, N. Effects of Combustion Chamber on Diesel Combustion SAE paper 861186 1986
- Ikegami, M. Fukuda, M. Yoshihara, Y. Kaneko, J. Combustion Chamber Shape and Pressurized Injection in High-Speed Direct-Injection Diesel Engines SAE paper 900440 1990
- Kidoguchi, Y. Yang, C. Miwa, K. Effect of Hight Squish Combustion Chamber on Simultaneous Reduction of NO X and Particulate from a Direct-Injection Diesel Engine SAE paper 1999-01-1502 1999
- Montajir, R. M. Tsunemoto, H. Ishitani, H. Minami, T. Fuel Spray Behavior in a Small DI Diesel Engine: Effect of Combustion Chamber Geometry SAE paper 2000-01-0946 2000
- Bianchi, G. M. Pelloni, P. Corcione, F. E. Mattarelli, E. Bertoni, F. L. Numerical Study of the Combustion Chamber Shape for Common Rail H.S.D.I. Diesel Engines SAE paper 2000-01-1179 2000
- Inagaki, K. Takasu, S. Nakakita, K. In-cylinder Quantitative Soot Concentration Measurement by Laser-Induced Incandescence SAE paper 1999-01-0508 1999
- Amsden, A. KIVA-3: A KIVA Program with Block-Structured Mesh for Complex Geometries LA-12503-MS Los Alamos March 1993
- Amsden, A. KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves LA-13313-MS Los Alamos July 1997
- Yakhot, V. Orsag, S. A. Renormalized Group Analysis of Turbulence. I. Basic. Theory Journal of Scientific Computing 1 1986
- Han, Z. Reitz, R. D. Turbulence Modelling of Internal Combustion Engines Using RNG k-ε Models Combustion Science and Technology 106 267 295 1995
- Kong, S. C. Han, Z. Reitz, R. D. The Development and Application of a Diesel Engine and Combustion Simulation SAE Paper 950278 1995
- Abraham, J. Bracco, F. V. Reitz, R. D. Comparison of Computed and Measured Premixed Charged Engine Combustion Combustion and Flame 60 1985
- Xin, J. Montgomery, D. Han, Z. Reitz, R. D. Modeling Diesel Engine NO X and Particulate over a Six-mode Emissions Cycle ASME Journal of Gas Turbines and Power 119 683 691 1997
- Ricart, L. M. Xin, J. Bower, G. R. Reitz, R. D. In-cylinder Measurement and Modeling of Liquid Fuel Spray Penetration in a Heavy-Duty Diesel Engines SAE Paper 970591 1997
- Hiroyasu, H. Kadota, T. Models for Combustion and Formation of Nitric Oxide and Soot in DI Diesel Engines SAE Paper 760129 1976
- Nagle, J. Strickland-Constable, R. F. Oxidation of Carbon between 1000-2000 C Proc. Of the Fifth Carbon Conf. 1 Pergammon Press 154 1962