This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dimethyl Ether: New Advances in Wear Testing: Theoretical and Experimental Results
Technical Paper
2003-01-3286
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The issues addressed in this paper are investigation of the wear mechanisms present in the standard lubricity test for diesel oil: The High frequency Reciprocating Rig (HFRR). The HFRR is a laboratory wear test using a ball on disk configuration. The result of a test is the wear scar diameter (WSD) on the ball. Up to now, all analyses indicated that fuel viscosity influences the wear scar size and fuel performance in full-scale pumps. The wear scar size could then be a result of hydrodynamic lubrication (at least a significant part of it) and not of boundary lubrication as it was the original intention of the test.
The appearance of an excellent volatile fuel for diesel engines, Dimethyl Ether (DME), has resulted in new wear tests such as the Medium Frequency Pressurised Reciprocating Rig (MFPRR), a pressurised version of the HFRR. DME has a about 25 times lower viscosity than diesel oil so the MFPRR viscosity sensibility issue is seriously aggravated for this fuel.
Molecular dynamics calculations involving straight alkanes with lengths from 3 to 14 carbon atoms have been performed. The model is based on simple inter-atomic and surface interactions and it simulates an asperity contact between curved surfaces with long-range elasticity. This last property has enabled the model to correlate well with experimental results. The outcome of the alkane calculations indicates that the longer ones lubricate better than the shorts ones but not necessarily because of viscosity differences. The reason is more likely that the long alkanes are able to squeeze more atoms into a contact than a short one when the lubrication film has a thickness similar to a few molecular diameters.
Recent MFPRR wear tests involving short straight alkanes and their branched isomers show that different wear scar diameters are obtained for a straight and a branched alkane isomers although they have almost the same viscosity. This result indicates that other fundamental properties than the viscosity, such as the molecule structure, can influence the lubricity outcome of the MFPRR. The inclusion of atoms into the contacts has the potential of explaining this phenomenon and, in the near future, a search for optimising this atom inclusion mechanism will be initiated both by experiments in the MFPRR and molecular dynamics calculations.
Recommended Content
Technical Paper | Performance of Alcohol Blends in Diesel Engines |
Technical Paper | The Effect of 2-Ethylhexyl Nitrate Cetane Improver on Engine Durability |
Technical Paper | The Lubricity Requirement of Low Sulfur Diesel Fuels |
Authors
- Ion M. Sivebaek - Technical University of Denmark, MEK-Energy
- Spencer C. Sorenson - Technical University of Denmark, MEK-Energy
- Jorgen Jakobsen - Technical University of Denmark, MEK-Energy
- Bo N. J. Persson - Institut für Festkörperforschung, Forschungszentrum Jülich
- Vladimir N. Samoilov - Physics Faculty, Moscow State University
Citation
Sivebaek, I., Sorenson, S., Jakobsen, J., Persson, B. et al., "Dimethyl Ether: New Advances in Wear Testing: Theoretical and Experimental Results," SAE Technical Paper 2003-01-3286, 2003, https://doi.org/10.4271/2003-01-3286.Also In
Oxygenated and Alternative Fuels, and Combustion and Flow Diagnostics
Number: SP-1809; Published: 2003-10-31
Number: SP-1809; Published: 2003-10-31
References
- Lacey P.I. Howell S.A. “Fuel Lubricity Reviewed” SAE Paper 982567 1998
- “Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR).” Annual Book of ASTM Standards 5.03 1355 1360 1998
- “Diesel Fuel- Assessment of Lubricity using the High-Frequency Reciprocating Rig (HFRR)- Ref. No. ISO 12156-1 and 2: 1997 (E) 1997
- Sorenson S.C. Mikkelsen S-E “Performance and Emissions of a 0.273 Liter Direct Injection Diesel Engine Fuelled with Neat Dimethyl Ether.” SAE Paper 950064 1995
- Kajitani S. Konno M. Rhee K.T. “Engine Performance and Exhaust Characteristics of Direct-Injection Diesel Engine Operated with DME.” SAE Paper 972973 1997
- Lacey P.I. Whalen M.V. Naegeli D. W. De La Cruz J.L. “Lubricity of Volatile Fuels for Compression Ignition Engines.” SAE Paper 2000-01-1804 2000
- Sivebaek I.M. Sorenson S.C. “Dimethyl Ether (DME) - Assessment of Lubricity Using the Medium Frequency Pressurised Reciprocating Rig Version 2 (MFPRR2).” SAE Paper 2000-01-2970 2000
- Sivebaek I. M. Sorenson S.C. Jakobsen J. “Dimethyl Ether (DME) - Assessment of Viscosity Using the New Volatile Fuel Viscometer (VFVM)” SAE Paper 2001-01-2013 2001
- Barbour R.H. Elliott N.G. Rickeard D.J. “Understanding Fuel Lubricity” SAE Paper 2000-01-1918 2000
- Lacey P.I. Mason R.L. “Fuel Lubricity: Statistical Analysis of Literature Data.” SAE Paper 2000-01-1917 2000
- Sivebaek I.M. Sorenson S.C. Jakobsen J. “The Lubrication Qualities of Dimethyl Ether (DME)” Proceedings of the 13th Colloquium Tribology Esslingen, Germany 2 1125 1132
- Hamrock B.J. “Fundamentals of Fluid Film Lubrication” NASA Reference Publication 1991
- Cann P. Ioannides E. Jacobson B. Lubrecht A. A. “The lambda ratio - a critical re-examination” Wear 175 177 188 1994
- Jacobson B. “Nano-Meter Film Rheology and Asperity Lubrication” Journal of Tribology 124 595 599 2002
- Israelachvili J. N. “Intermolecular and Surface Forces” Second Academic Press 1992
- Homola A. M. Isralachvili J. N. McGuiggan P. M. Gee M. L. “Fundamental Experimental Studies in Tribology: The Transition from “Interfacial” Friction of Undamaged Molecularly Smooth Surfaces to “Normal” Friction with Wear” Wear 136 65 83 1990
- Persson B.N.J. “Sliding Friction: Physical Principles and Applications” Springer Heidelberg 2000
- Handbook of Chemistry and Physics 82th CRC 2001
- Persson B.N.J. Ballone P. “Squeezing lubrication films: Layering transition for curved solid surfaces with long-range elasticity” Journal of Chemical Physics 112 9524 9542 2000
- Persson B. N. J. Samoilov V.N. Zilberman S. Nitzan A. “Phenomenology of squeezing and sliding of molecularly thin Xe, CH 4 and C 16 H 34 lubrication films between smooth and rough curved solid surfaces with long-range elasticity” Journal of Chemical Physics 117 3897 3914 2002
- Sivebaek I.M. Samoilov V.N. Persson B.N.J. “Squeezing molecular thin alkane films between curved solid surfaces with long-range elasticity: Layering transitions and wear” Journal of Chemical Physics 119 2314 2321 2003
- Jorgensen W.L Madura J.D. Swenson C.J. “Optimised Intermolecular Potential Functions for Liquid Hydrocarbons” Journal of American Chemists Society 106 6638 6646 1984
- Dysthe D.K. Fuchs A.H. Rousseaou B. “Condensed Phase Dynamics, Structure, and Thermodynamics: Spectroscopy, Reactions, and Relaxation - Fluid transport properties by equilibrium molecular dynamics. III. Evaluation of united atom interaction potential models for pure alkanes” Journal of Chemical Physics 112 7581 7590 2000
- Wei D.P. Spikes H.A. Korcek S. “The Lubricity of Gasoline” Tribology Transactions 42 813 823 1999
- Sivebaek I.M. Sorenson S.C. Jakobsen J. “New fundamental studies in fuel lubricity” Tribology Letters 2003
- Gao J. Luedtke W.D. Landman U. “Structure and solvation forces in confined films: linear and branched alkanes” Journal of Chemical Physics 106 4309 4318 1997
- Gao J. Luedtke W.D. Landman U. “Origins of Solvation Forces in Confined Films” Journal of Physical Chemistry B 101 4113 4123 1997