This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Rapid Bulk Combustion of Lean Premixture by Using Radical Injection Method and an Application to an Actual Engine
Technical Paper
2003-01-3212
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This experimental study was carried out to obtain fundamental data on a radical engine operation using a radical induced injection method to expect both low emission and high efficiency by rapid bulk combustion. Two kinds of experiment were conducted for the purpose. First of all, the basic experiments were conducted to confirm rapid bulk combustion by using a radical induced injection method in a constant volume chamber. In this experiment, the higher combustion velocity is realized much more than in a conventional method. Next, the fundamental data were applied to an actual engine so as to obtain fundamental data on a radical engine operation by radical induced injection. A subchamber-type diesel engine was reconstructed to a SPI type engine with controlling the injection duration, spark timing and finally converted to a radical engine. In this study, operation characteristics of the radical engine were examined with the function of the subchamber's specification like the volume, orifice diameter and the number. From these experimental results, the radical engine was successfully operated and was affected by the ratio of the orifice area to the subchamber volume.
Authors
- Sung-Sik Chung - Dong-a University, Dept. of Mechanical Engineering, Busan, Korea
- Jong-Yul Ha - Dong-a University, Dept. of Mechanical Engineering, Busan, Korea
- Jong-Sang Park - Dong-a University, Dept. of Mechanical Engineering, Graduate School, Busan, Korea
- Myung-Jun Lee - Yangsan College, Dept. of Automotive Engineering, Kyungnam, Korea
- Jeong-Kuk Yeom - Silla University, Dept. of Automotive Engineering, Busan, Korea
Citation
Chung, S., Ha, J., Park, J., Lee, M. et al., "Rapid Bulk Combustion of Lean Premixture by Using Radical Injection Method and an Application to an Actual Engine," SAE Technical Paper 2003-01-3212, 2003, https://doi.org/10.4271/2003-01-3212.Also In
References
- Lee JoongSoon et al. Effect of Ignition-Energy Characteristics on the Ignition and the Combustion of a Premixed Gas Trans. KSAE 4 1 1996 28 35
- Lee JoongSoon et al. Effect of Ignition Energy Discharge Characteristics on the Lean Flammability Limit Trans. KSAE 6 4 1998 47 55
- Jeong Yongll Automotive environment 32 256
- Tosisuge Hirano Combustion theory 1986 30 71
- Pascal, H. et al. New Combustion Concept for Internal Combustion Engines Proceedings of the 15th Internal Combustion Engine Symposium Korea 1999
- FISITA A Fundamental Study to Improve the Ignitability of Lean Mixture by Radicals Induced Injection in a Constant Volume Combustor Park Jong-Sang Choi Ha-Sung Lee Myung-Jun Lee Tae-Won Ha Jong-Yul Chung Sung-Sik 2002
- Norimasa IIDA et al. Combustion and Emission of Low Heat Rejection, Ceramic Methanol ATAC Engine JSME transaction 59 568 1993 4030 4037