This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Rolling Regeneration Trap for Diesel Particulate Control
Technical Paper
2003-01-3178
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
One way to achieve low temperature regeneration on diesel particulate traps is to employ NO2 as the oxidant. However, the engine may not produce sufficient NOx to achieve the required particulate regeneration. An RRT (rolling regeneration trap) was proposed as a way to enhance the effective concentration in diesel engine exhaust. The RRT uses catalyzed ceramic foam, which allows repeated use of existing NOx in the exhaust stream. The ceramic foam is a filter itself: thus, it can reduce the particulate loading on the wall-flow filter, which is more prone to plugging by the particulate deposits. Furthermore, the presence of particulate matter in the catalyzed section circumvents the high temperature limit imposed by thermodynamic equilibrium of a simple NO+NO2 +O2 system. However, experimental results revealed that the regeneration efficiency on the wall-flow section was very low and NO2 slip is an issue.
Recommended Content
Technical Paper | Size Determination of the Ceramic Diesel Particulate Trap |
Technical Paper | Comparison between FR-4 and Ceramic Substrate |
Technical Paper | Diesel Fuel Lubricity by Standard Four Ball Apparatus Utilizing Ball on Three Disks, BOTD |
Authors
Citation
Cheng, S., "Rolling Regeneration Trap for Diesel Particulate Control," SAE Technical Paper 2003-01-3178, 2003, https://doi.org/10.4271/2003-01-3178.Also In
Diesel Particulate Systems, Engines and Components, and Engine Performance Additives
Number: SP-1802; Published: 2003-10-31
Number: SP-1802; Published: 2003-10-31
References
- MacDonald, J. Scott “The effect of operating conditions on the effluent of a wall-flow monolith particulate trap” SAE Paper No. 831711
- Ludecke, Otto A. Dimick, David L. “Diesel exhaust particulate control by monolith trap and fuel additive regeneration” SAE Paper No. 830085
- Simon, Gerald M. Stark, Terrence L. “Diesel particulate trap regeneration using ceramic wall-flow traps, fuel additives, and supplemental electrical igniters” SAE Paper No. 850016
- Simon, Gerald M. Stark, Terrence L. Hoffman, Mark B. “Diesel exhaust particulate control techniques for light-duty trucks” SAE Paper No. 860137
- McCabe, R. W. Sinkevitch, R. M. “Oxidation of diesel particulates by catalyzed wall-flow monolith filters” SAE Paper No. 870009
- MacDonald, J. Scott Simon, Gerald M. “Development of a particulate trap system for a heavy-duty diesel engine” SAE Paper No. 880006
- Tuteja, A. D. Hoffman, M. B. Lopez-Crevillen, J. M. Singh, S. Stomber, R. R. Wallace, G. C. “Selection and development of a particulate trap system for a light duty diesel engine” SAE Paper No. 920142
- Wade, W. R. White, J. E. Florek, J. J. “Diesel particulate trap regeneration techniques” SAE Paper No. 810118
- Wade, W. R. White, J. E. Florek, J. J. Cikanek, H. A. “Thermal and catalytic regeneration of diesel particulate traps” SAE Paper No. 830083
- Rao, V. D. White, J. E. Wade, W. R. Almone, M. G. Cikanek, H. A. “Advanced techniques for thermal and catalytic diesel particulate trap regeneration” SAE Paper No. 850014
- Horrocks, R. W. “Particulates control systems for diesel engines” IMechE 1987
- Luders, H. Stommel, P. Backes, R. “Applications for regeneration of diesel particulate traps by combining different regeneration systems” SAE Paper No. 970470
- Hawker, P. N. “Diesel emission control technology” Platinum Metals Review 39 1 1995
- Setiabudi, A. Makkee, M. Moulijn, J. A. “An optimal usage of NO x in a combined Pt/ceramic foam and a wall-flow monolith filter for an effective NO x -assisted diesel soot oxidation_” SAE Paper No. 2003-01-0379
- Cooper, B. J. Thoss, J. E. “Role of NO in diesel particulate emission control” SAE Paper No. 890404
- Hawker, P. Meyer, N. Huthwohl, G. Vogel H. Th. Bates, B. Magnusson, L. Bronnenberg, P. SAE Paper No. 970182
- Hawker, P. Huthwohl, G. Henn, J. Koch, W. Luders, H. Luers, B. Stommel, P. “Effect of a continuously regenerating diesel particulate filter on nonregulated emissions and particle size distribution” SAE Paper No. 980189
- Oi-Uchisawa, J. Obuchi, A. Ogata, A. Enomoto, R. Kushiyama, S. “Effect of feed gas composition on the rate of carbon oxidation with Pt/SiO and the oxidation mechanism” Applied Catalysis B: Environmental 9 21 1999
- Ambs, J. L. McClure, B. T. “The influence of oxidation catalysts on NO 2 in diesel exhaust” SAE Paper No. 932494
- Allansson, R. Maloney, C. A. Walker, A. P. Warren, J. P. “Sulphate production over the CRT ™ : what fuel sulphur level is required to enable the EU 4 and EU 5 PM standards to be met?” SAE Paper No. 2000-01-1875
- Kandylas, Ioannis P. Koltsakis, Grigorios C. “NO 2 -Assisted Regeneration of Diesel Particulate Filters: A Modeling Study” Industrial & Engineering Chemistry Research 2115 41 2002
- Heisler, Heinz “Advanced engine technology” Arnold, London 1995
- Ayala, A. Kado, N. Y. Okamoto, R. A. Holmén, B. A. Kuzmicky, P. A. Kobayashi, R. Stiglitz, K. E. “Diesel and CNG heavy-duty transit bus emissions over multiple driving schedules: Regulated pollutants and project overview” SAE Paper No. 2002-01-1722
- LeTavec, C. Uihlein, J. Vertin, K. Chatterjee, S. Hallstrom, K. Wayne, S. Clark, N. Gautam, M. Thompson, G. Lyons, D. Chandler, K. Coburn, T. “Year-long evaluation of trucks and buses equipped with passive diesel particulate filters” SAE Paper No. 2002-01-0433
- Fino, D. Fino, P. Saracco, G. Specchia, V. “Innovative means for the catalytic regeneration of particulate traps for diesel exhaust cleaning” Chemical Engineering Science 951 58 2003