This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Analysis of Observed Burn Rates in a Spark-Ignition Engine and the Relation to Fuel Properties
Technical Paper
2003-01-3125
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper presents a statistical analysis of burn rates observed in a single cylinder spark-ignition engine. Parameters in a functional description of the burn rate were correlated to fuel blend composition and engine parameters. The analysis indicated that burn rate parameters were inter-linked and did not change in isolation. The use of sound statistical experimental design and analysis proved worthwhile in revealing tendencies that may otherwise have been misinterpreted. The features of the burn rate were discussed in lieu of the engine design, blend properties and test conditions.
Recommended Content
Authors
Citation
Swarts, A., Viljoen, C., and Coetzer, R., "The Analysis of Observed Burn Rates in a Spark-Ignition Engine and the Relation to Fuel Properties," SAE Technical Paper 2003-01-3125, 2003, https://doi.org/10.4271/2003-01-3125.Also In
Spark Ignition and Compression Ignition Engines Modeling 2003
Number: SP-1803; Published: 2003-10-31
Number: SP-1803; Published: 2003-10-31
References
- Douaud, A. M. Eyzat P. “Four Octane Number Method for Predicting the Anti-Knock Behaviour of Fuels and Engines” SAE 780080
- Blizard, N.C. Keck, J.C. “Experimental and Theoretical Investigation of a Turbulent Burning Model for Internal Combustion Engines” SAE paper 740191 1974
- Fan, L. Reitz, R.D. “Development of an Ignition and Combustion Model for Spark-Ignition Engines” SAE paper 2000-01-2809 2000
- Shayler, P.J. Wiseman, M.W. Ma, T. “Improving the Determination of Mass Fraction Burnt” SAE paper 900351 1990
- Rassweiler, G.M. Withrow, L. “Motion Pictures of Engine Flames Correlated with Pressure Cards” SAE paper 800131 1980
- Brunt, M.F.J. Emtage, A.L. “Evaluation of Burn Rate Routines and Analysis Errors” SAE paper 970037 1997
- Daniels, C.F. “The Comparison of Mass Fraction Burned Obtained from Cylinder Pressure Signal and Spark Plug Ion Signal” SAE paper 980140 1998
- Heywood, J.B. “ Internal Combustion Engine Fundamentals” McGraw-Hill Book Company New York 1988 0-07-100499-8
- WAVE Documentation/User's Manual Version 3.5 November 1999
- Cornell, J.A. “ Experiments with mixtures. Designs, Models and the analysis of mixture data” , John Wiley & Sons, Inc. New York 1981
- Atkinson, A.C. Donev, A.N. “ Optimum experimental designs ” Clarendon Pres. Oxford 1992
- Scheffe, H. “Experiments with mixtures” Journal of the Royal Statistical Society, B 20 344 360 1958
- Cornell, J.A. “Fitting a slack-variable model to mixture data: Some questions raised” Journal of Quality Technology 32 2 April 2000
- Design-Expert® Software Design-Expert 6 User's Guide Stat-Ease, Inc. Minneapolis, MN 2000
- Myers, R.H. Montgomery, D.C. Response Surface Methodology Wiley New York, NY 1995
- Standard Test Method for Research Octane Number of a Spark-Ignition Engine ASTM Designation: D 2699-01a October 2001
- Shen, H. Hinze, P.C. Heywood, J.B. “A Study of Cycle-to-Cycle Variations in SI Engines Using a Modified Quasi-Dimensional Model” SAE paper 961187 1996
- Grünefeld, G. Beushausen, V. Andresen, P. Hentschel, W. “A Major Origin of Cyclic Energy Conversion Variations in SI Engines: Cycle-to-Cycle Variations of the Equivalence Ratio and Residual Gas of the Initial Charge” SAE paper 941880 1994
- Johansson, B. “Cycle to Cycle Variations in S.I. Engines - The Effects of Fluid Flow and Gas Composition in the Vicinity of the Spark Plug on Early Combustion” SAE paper 962105 1996
- Yates, A.B.D. Swarts, A. Viljoen, C.L. “An Investigation of Anomalies Identified Within the ASTM Research and Motor Octane Scales” SAE paper 2003-01-1772 2003
- Clarke, A. Stone, R. Beckwith, P. “Measurement of the laminar burning velocity of n-butane and isobutane mixtures under micro-gravity conditions in a constant volume vessel” Journal of the Inst. of Energy September 2001 74 70 76
- S-PLUS 6 for Windows Guide to Statistics 2 Insightful Corporation Seattle WA
- Taylor, C. F. “ The Internal Combustion Engine In Theory And Practice Volume 2: Combustion, Fuels, Materials, Design” The MIT Press Cambridge 1985
- Oppenheim, A.K. Kuhl, A.L. “Life of Fuel in Engine Cylinder” SAE paper 980780 1998