This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Comparison of Winding Cells with One and Two Rovings in Robotized Filament Winding Technology
Technical Paper
2003-01-2911
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The present work shows the comparison between a robotized filament winding cell equipped with a feed and deposition system able to wind asymmetric or complex parts by means of two rovings and the traditional cell able to wind only one roving. The comparison has taken into account the quality of the manufactured workpieces. The use of two rovings allows about to halve the winding time and, therefore, to reduce significantly the manufacturing costs. To compare the two cells many experiments have been carried out by changing the values of the process parameters through design of experiment (D.O.E.) techniques. The quality of the workpieces manufacture by the two cells has been evaluated and compared.
Authors
Citation
Polini, W. and Sorrentino, L., "Comparison of Winding Cells with One and Two Rovings in Robotized Filament Winding Technology," SAE Technical Paper 2003-01-2911, 2003, https://doi.org/10.4271/2003-01-2911.Also In
References
- Barth, J.R. 1990 “Fabrication of complex composite structures using advanced fiber placement technology” 35 th International SAMPE Symposium and Exhibition Anaheim, CA 710 720
- Bullock, F. Kowalski, S. Young, R. 1990 “Automated prepreg tow placement for composite structures” 35 th International SAMPE Symposium and Exhibition Anaheim, CA 734 745
- Saravanos, D.A. Lamancusa, J.S. 1990 “Optimum structural design of robotic manipulators with fiber reinforced composite materials” Computers & Structures 36 1 119 132
- Steiner, K.V. 1990 “Development of a robotic filament winding workstation for complex geometries” 35th International SAMPE Symposium and Exhibition Anaheim, CA 757 766
- Hummler, J. Lee, S.K. Steiner, K.V. 1991 “Recent advances in thermoplastic robotic filament winding” Proceedings of 36 th International SAMPE Symposium 2142 2156
- Scholliers, J. van Brussel, H. 1994 “Computer-integrated filament winding: computer-integrated design, robotic filament winding and robotic quality control” Composite Manufacturing 5 1 15 23
- Scholliers, J. van Brussel, H. 1996 “Design and off-line programming of a robotic tape winding cell” Robotics and Computer-Integrated Manufacturing 12 1 93 98
- Markov, L. Cheng, R.M.H. 1996 “Conceptual design of robotic filament winding complexes” Mechatronics 6 8 881 896
- Lauke, B. Friedrich, K. 1993 “Evaluation of processing parameters of thermoplastic composites fabricated by filament winding” Composites Manufacturing 4 2 93 101
- Fuck, R. Neitzel, M. 1995 “Improved thermoplastic tape winding using laser or direct-flame heating” Composites Manufacturing 6 189 192
- Cohen, D. 1997 “Influence of filament winding parameters on composite vessel quality and strength” Composites: Part A 28 1035 1047
- Mertiny, P. Ellyin, F. 2002 “Influence of the filament winding tension on physical and mechanical properties of reinforced composites” Composites: Part A 33 1615 1622
- Chan, S. Munro, M. Fahim, A. 1996 “Accuracy-speed relationships of a robotic filament winding cell” Robotics and Computer-Integrated Manufacturing 12 1 3 13
- Cantoni, S. De Nicola, F. Di Vita, G. Totano, G. Farioli, M. 1999 “Computer aided manufacturing of composite complex shape helicopter structural elements by robot winding” 25 th European Rotocraft Forum Roma, Italy
- Wells, G.M. Steiner, K.V. 1991 “Robotic thermoplastic composite placement” Technical Report of Center for Composite Materials
- Carrino, L. Landolfi, M. Moroni G. Di Vita, G. 1996 “CAM for Robotized Filament Winding, Advanced Manufacturing System and Technology” CISM Courses and Lectures Kulianic E. Springer Verlag 372 601 608
- Carrino, L. Moroni, G. Turchetta, S. 1998 “CAD/CAM for robotic filament winding process design” European Conference on Composite Materials Napoli, Italy 615 622
- Carrino, L. Polini, W. Sorrentino, L. 2002 “Design of a new feed-deposition head for robotised filament winding” 7 th Annual ASME Design for Manufacturing Conference Montreal, Canada
- Carrino, L. Polini, W. Sorrentino, L. 2002 “Experimental validation of a new deposition device for a robotized filament winding cell” 10 th European Conference on Composite Materials, ECCM-10 Brugge, Belgium
- Polini, W. Sorrentino L. 2003 “Design of winding with two rovings for cost efficiency and quality in robotized filament winding” 8 th Annual ASME Design for Manufacturing Conference Chigaco, USA
- Carrino, L. Sorrentino, L. Strano, M. 2003 “Influence of the winding tension on the mechanical properties of composite parts manufactured by a robotic filament winding cell” Advancing with composites Milano, Italy
- Carrino, L. Polini, W. Sorrentino, L. 2003 “Method to evaluate winding trajectories in robotized filament winding” Journal of Composite Materials