This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of a Clean, Efficient, Propane-Fueled Tractor
Technical Paper
2003-01-1923
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Southwest Research Institute has developed a modern propane-fueled John Deere 5410 tractor through funding provided by the Propane Education and Research Council and the Texas Alternative Fuels Council with support from the John Deere Product Engineering Center. The project began in June 2001 and the tractor was completed in March 2002.
The objective of this project was to develop an economical, commercially-viable propane-fueled heavy- duty engine for an off-road vehicle. Propane-fueled agricultural and construction equipment would be appropriate new applications for this engine. For example, large numbers of small agricultural tractors are used in both rural and urban settings for such tasks as mowing, right of way maintenance, etc. Use of diesel powered equipment in an urban environment contributes to ozone formation and particulate matter emissions, which are both air quality concerns. According to the Equipment Manufacturers Institute, in 1999, 47,181 tractors in the 30 - 75 kW range were sold in the U.S. The two states with the most purchases were Texas and California, both states that have documented air quality problems.
The final converted LPG engine emissions, output power, and noise emissions compare favorably to the original diesel configuration. The diesel engine greatly exceeds the Tier 3 limits in terms of NOx + NMHC and PM. Although the propane engine produced slightly less power (∼ 8%) than the diesel engine, the NOx + NMHC emissions output was substantially reduced. The propane engine NOx + NMHC was approximately 44 percent that of the diesel engine. This reduction was primarily due to a large decrease in NOx, since the NMHC emissions from the propane engine were higher. The propane engine and diesel engine has similar CO levels. The propane engine had significantly lower particulate matter (PM), with a 92 percent reduction compared to the diesel engine.
Following the laboratory engine and control system development, the engine was installed in a John Deere medium-duty model 5410 tractor. Fuel storage was provided by multiple conformable storage tanks, and a central refueling port was utilized for convenient refueling. All propane equipment installation was supervised by the Texas Railroad Commission. Further development of the control system for driveability was performed, in addition to troubleshooting of engine and propane system components.
Recommended Content
Technical Paper | Propane Fueled Tractor Demonstration |
Technical Paper | A New DPF System for Duty Cycle Vehicles |
Technical Paper | Particulate Emissions from a China V Heavy-Duty Diesel Engine with Ultra Low Sulfur Diesel Fuel and DOC+CDPF+SCR |
Authors
Topic
Citation
Birch, B. and Kubesh, J., "Development of a Clean, Efficient, Propane-Fueled Tractor," SAE Technical Paper 2003-01-1923, 2003, https://doi.org/10.4271/2003-01-1923.Also In
References
- US Department of Energy, Energy Information Agency http://www.eia.doe.gov/ December 2001
- “Development if a John Deere 300 Series Natural Gas Engine” Kubesh John T. Southwest Research Institute 1996
- www.dieselnet.com/standards.html