This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Influence of Material Properties on the Shape and Level of the Forming Limit Diagram
Technical Paper
2003-01-1149
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents a theoretical model for prediction of forming limit diagram (FLD) in sheet metals. The theoretical procedure is based on the work of Marciniak and Kuczynski (known as the M-K model). The influence of material properties, such as anisotropy, strain hardening and strain rate sensitivity on the shape and level of the FLD are investigated. An initial non-uniformity in thickness of a sheet metal, which is commonly assumed as a basis for the prediction of limit strains in the biaxial stretching process, is considered here as a feature of the mathematical idealization of a complex process, rather than as a material imperfection existing in a real sheet metal.
Recommended Content
| Technical Paper | Automotive Applications of Stretch Flange High Strength Steel |
| Ground Vehicle Standard | Properties of Galvanized Low Carbon Sheet Steels and Their relation to Formability |
| Aerospace Material Specification | Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C) Vacuum Melted, Environment-Controlled Packaging |
Authors
Citation
Assempour, A. and Nurcheshmeh, M., "The Influence of Material Properties on the Shape and Level of the Forming Limit Diagram," SAE Technical Paper 2003-01-1149, 2003, https://doi.org/10.4271/2003-01-1149.Also In
References
- Hillier M.J. International journal of mechanical sciences 5 57 1963
- Kim K.K. Kim D.W. International journal of mechanical sciences 25 293 1983
- Tai W.H. International journal of mechanical sciences 30 119 1998
- Bressan J. D. Williams J.A. International journal of mechanical sciences 25 155 1983
- Marciniak Z. Kuczynski K. International journal of mechanical sciences 9 609 1967
- Marciniak Z. Kuczynski K. International journal of mechanical sciences 15 789 1973
- Tadros A. K. Mellor P.B. International journal of mechanical sciences 20 121 1978
- Wilson D. V. Mirshams A. R. Roberts W. T. International journal of mechanical sciences 25 859 1983
- Parmar A Mellor PB. International journal of mechanical sciences 20 385 1978
- Hill R. The mathematical theory of plasticity Oxford university press London 1950
- Neale KW Chater E. International journal of mechanical sciences 22 563 1980
- Ravishankar C. Venkadesan S. Scripta Materialia 35 3 323 1996
- Haddad A. Vacher P. Arrieux R. Journal of Material Processing Technology 92-93 419 1999
- Gronostajski Jerzy Zimniak Zbigniew Journal of Material Processing Technology 55 213 1995
- Shakeri M. Sadough A. Dariani B. M. Proc. Instn. Mech. Engrs 214 821 2000
- McCarron, T.J. Kain K.E. Hahn, G.T. Flanagan, W.F. Metall. Trans. A 19A 2067 1988
- Bauccio M. ASM Metals Reference Book 3rd park, OH ASM International 1993