This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
On Automotive Disc Brake Squeal Part II: Simulation and Analysis
Technical Paper
2003-01-0684
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper reviews the state of the art of CAE simulation and analysis methods on disc brake squeal. It covers complex modes analysis, transient analysis, parametrical analysis, and operational simulation. The advantages and limitations of each analysis method are discussed. This review can help analysts to choose right methods and decide new lines of method development. For completeness, analytic methods dealing with continuum models are also briefly covered. This review was made from those papers that the authors are familiar with. It is not meant to be all-inclusive even though the best possible effort has been attempted.
Recommended Content
| Technical Paper | Component Contribution and Eigenvalue Sensitivity Analysis for Brake Squeal |
| Technical Paper | On Automotive Disc Brake Squeal Part III Test and Evaluation |
| Technical Paper | On Automotive Disc Brake Squeal Part IV Reduction and Prevention |
Authors
Citation
Ouyang, H., Nack, W., Yuan, Y., and Chen, F., "On Automotive Disc Brake Squeal Part II: Simulation and Analysis," SAE Technical Paper 2003-01-0684, 2003, https://doi.org/10.4271/2003-01-0684.Also In
SAE 2003 Transactions Journal of Passenger Cars - Mechanical Systems
Number: V112-6; Published: 2004-09-15
Number: V112-6; Published: 2004-09-15
References
- Abdelhamid, M. K. “Creep-groan of Disc Brakes” SAE Paper 951282 1995
- Brecht, J. et al “Mechanisms of Brake Creep-groan” SAE Paper No. 973026 1997
- Abdelhamid, M. K. “Brake judder analysis using transfer functions” SAE Paper 973018 1997
- Swartzfager D. G. et al “Relationship of the transfer film formed under low pressure drag conditions and torque variation” SAE Paper 982255 1998
- Kubota, M. et al “A study of the mechanism causing high-speed brake judder” SAE Paper 980594 1998
- Crolla, D. A. Lang, A. M. “Brake noise and vibration - the state of the art” Dowson, D. Taylor, C. M. Godet, M. Vehicle Tribology 18 165 174 1991
- Yang, S. Gibson, R. F. “Brake vibration and noise: review, comments and proposals” Int. J. Mater. & Product Tech. 12 4-6 496 513 1997
- Kinkaid, N. M. O'Reilly, O M Papadopoulos, P. “Automotive disc brake squeal: a review” Journal of Sound and Vibration, 2003
- Oden, J. Martins, J. “Model and computational methods for dynamic friction phenomena” Computer Methods Appl. Mech. Eng. 52 527 634 1985
- Ibrahim, R. A. “Friction-induced vibration, chatter, squeal, and chaos: Part I - Mechanics of friction; Part II - Dynamics and modeling” Applied Mechanics Review 47 209 253 1994
- Akay, A. “Acoustics of friction” J. Acoust. Soc. Am. 111 4 1525 1548 2002
- Jarvis, R. P. Mills, B. “Vibration induced by dry friction” Proc. Instn. Mech. Engrs. 178 32 1963-1964 847 866
- Earles, S. W. E. Lee, C. K. “Instabilities arising from the frictional interaction of a pin-disc system resulting in noise generation” ASME Journal of Engineering for Industry 98 1 81 88 1976
- North, M. R. “Disc brake squeal” Institute of Mechanical Engineers 169 176 1976
- Millner, N. “An analysis of disc brake squeal” SAE Paper 780332 1978
- Chan, S. N. Mottershead, J. E. Cartmell, M. P. “Parametric resonances at subcritical speeds in discs with rotating frictional loads” Proc. IMechE, Part C 208 417 425 1994
- Mottershead, J. E. Ouyang, H. Cartmell, M. P. Friswell, M. I. “Parametric resonances in an annular disc, with a rotating system of distributed mass and elasticity; and the effects of friction and damping” Proceedings of the Royal Society of London A 453 1 1 19 1997
- Ouyang, H. Mottershead, J. E. Cartmell, M. P. Friswell, M. I. “Friction-induced parametric resonances in discs: effect of a negative friction-velocity relationship” Journal of Sound Vibration 209 2 251 264 1998
- Hulten, J. O. Flint, J. “An assumed modes approach to disc brake squeal analysis” SAE Paper 1999-01-1335 1999
- Flint, J. “Modeling of high frequency disc-brake squeal” Proc. IMechE Int. Conf. on Auto. Brakes - Braking 2000 Leeds 39 50 2000
- Tzou, K. I. Wickert, J. A. Akay, A. “In-plane vibration modes of arbitrary thick disc” ASME J. Vibr. Acoust. 120 384 391 1998
- Tseng, J-G. Wickert, J. A. “Nonconservative stability of a friction loaded disk” ASME J. Vibr. Acoust. 120 922 929 1988
- Ouyang, H. Mottershead, J. E. A moving-load model for disc-brake stability analysis ASME Journal of Vibration and Acoustics 125 1 1 6 2003
- Nack, W. V. “Friction Induced Vibration: Brake Moan” SAE paper 951095 1995
- Nack, W. V. “Brake squeal analysis by the finite element method” Int. J. Vehicle Des. 23 3/4 263 275 2000
- Liles, G. D. “Analysis of disc brake squeal using finite element methods” SAE Paper 891150 1989
- Ripin, Z. B. M. “Analysis of Disc Brake Squeal Using the Finite Element Method” PhD Thesis Dept. Mech. Eng., University of Leeds 1995
- Kung, S. Dunlap, K. B. Ballinger, R. S. “Complex eigenvalue analysis for reducing low frequency brake squeal” SAE Paper 2000-01-0444 2000
- Yuan, Y. “An eigenvalue analysis approach to brake squeal problem” Proc. 29 th ISATA Conf. Automotive Braking Systems Florence, Italy 1996
- Yuan, Y. “Brake squeal analysis with FEM: numerical results” The 15th Annual SAE Brake Colloquium Phoenix October 1997
- Yuan, Y. “A study of the effects of negative friction-speed slope on brake squeal” 1995 ASME Des. Eng. Tech. Conf. 3 1153 1162 1995
- Okamura, H. Nishiwaki, M. “Study on brake noise” (1 st Report, on Drum Brake Squeal), Transactions of the JSME 54 497 166 174 1988
- Chan, S. N. Mottershead, J. E. Cartmell, M. P. “Instabilities at subcritical speeds in discs with rotating frictional follower loads ASME J. Vibr. Acoust. 117 2 240 242 1995
- Tworzydlo, W. et al “Experimental and numerical studies of friction induced oscillations of a pin on disk apparatus” ASME DETC97/VIB-3903 1997
- Nishiwaki, M. “Generalised theory of brake noise” Proc. IMechE, J. Auto. Eng. 207 195 202 1993
- Nishiwaki, M. Harada, H. Okamura, H. Ikeuchi, T. “Study on disc brake squeal” SAE Paper 890864 1989
- Kido, I. Kurahachi, T. Asai, M. “A study of low-frequency brake squeal noise” SAE Paper 960993 1996
- Matsushima, T. Masumo, H. Ito, S. Nishiwaki, M. “FE analysis of low-frequency disc brake squeal” SAE Paper 982251 1998
- Guan, D. Jiang, D. “A study on disc brake squeal using finite element methods” SAE Paper 980597 1998
- Shi, T. S. Dessouki, O. Warzecha, T. Jayasundera, A. “Advances in complex eigenvalue analysis for brake noise” SAE Paper 2001-0101603 2001
- Matsuzaki, M. Izumihara, T. “Brake noise caused by longitudinal vibration of the disc rotor” SAE Paper 930804 1993
- Dunlap, K. B Riehle, M. A. Longhouse, R. E. “An investigative overview of automotive disc brake noise” SAE Paper 1999-01-0142 1992
- Chen, F. Chen, Shih-Emn Harwood, P. “In-plane mode/friction process and their contribution to disc brake squeal at high frequency” SAE Paper 2000-01-2773 2000
- Chen, F. Chern, Y. Swayze, J. “Modal coupling and its effect on brake squeal” SAE paper 2002-01-0954 2002
- Baba, H. Wada, T. Takagi, T. “Study on reduction of brake squeal caused by in-plane vibration of rotor” SAE Paper 2001-01-3158 2001
- Bae, J. Wickert, J. “Free vibration of coupled disc-hat structures” J. Sound Vib. 235 117 132 2000
- Feld, D. J. Fehr, D. J. “Complex eigenvalue analysis applied to an aircraft brake vibration problem” 84-1 1135 1142 AMSE 1995
- Mottershead, J. E. “Vibration and friction-induced instability in discs” Shock Vib. Dig. 30 14 31 1998
- Mote, C. D., Jr. “Stability of circular plates subjected to moving loads” Journal of the Franklin Institute 290 329 344 1970
- Iwan, W. D. Moeller, T. L. “The stability of a spinning disc with a transverse load system” ASME Journal of Applied Mechanics 43 485 490 1976
- Ono, K. Chen, J. S. Bogy, D. B. “Stability analysis of the head-disk interface in a flexible disc drive,” ASME J. Appl. Mech. 58 1005 1014 1991
- Ouyang, H. Mottershead, J. E. Brookfield, D. J. James, S. Cartmell M. P. “A methodology for the determination of dynamic instabilities in a car disc brake” Int. J. Vehicle Design 23 3/4 241 262 2000
- Ouyang, H. Cao, Q. Mottershead, J. E. Treyde, T. Cartmell, M. P. “Modelling and simulation of the vibration and squeal of a disc brake” Proc. IMechE Int. Conf. on Auto. Brakes - Braking 2002 Leeds 43 52 2002
- Nagy, L. I. Cheng, J. Hu, Y. “A new method development to predict squeal occurrence” SAE Paper 942258 1994
- Chargin, M. L. Dunne, L. W. Herting, D. N “nonlinear dynamics of brake squeal” Finite Elements in Analysis and Design 28 69 82 1997
- Hu, Y. Nagy, L. I. “Brake squeal analysis using nonlinear transient finite element method” SAE Paper 971610 1997
- Hu, Y. Mahajan, S. Zhang, K. “Brake squeal DOE using nonlinear transient analysis” SAE Paper 1999-01-1737 1999
- Mahajan, S. K. Hu, Y. Zhang, K. “Vehicle disc brake squeal simulation and experiences” SAE Paper 1999-01-1738 1998
- Chern, Y. Chen, F. Swayze, J. “Nonlinear Brake Squeal Analysis” SAE Paper 2002-01-3138 2002
- Hendricx, W. Garesci, F. Pezzutto, A. Van der Auweraer, H. “Experimental and numerical modeling of friction induced noise in disc brakes” SAE Paper 02AC-25 2001
- Rook, T. E. Enright, J. J. Kumar, S. Balagangsadhar, R. “Simulation of aircraft brake vibration using flexible multibody and finite element methods to guide component testing” SAE Paper 2001-01-3142 2001
- Travis, M. H. “Nonlinear transient analysis of aircraft landing gear brake whirl and squeal” ASME 84-1 1995
- Qiao, S. L. Ibrahim, R. A. “Stochastic dynamics of systems with friction-induced vibration” J. Sound. Vib. 223 1 115 140 1999
- Ibrahim, R. A. Madhavan, S. Qiao, S. L. Chang, W. K. “Experimental investigation of friction-induced noise in disc brake systems” Int. J. Vehicle Des. 23 3/4 218 240 2000
- Willner, K. Gaul, L. “A penalty approach for contact description by fem based on interface physics” Contact Mechanics II WIT Press 1995
- Hamzeh, O. Tworzydlo Chang, W. H. “Analysis of friction induced instabilities in a simplified aircraft brake” SAE 1999-01-3404 1999
- Ouyang H. Mottershead J. E. Cartmell M. P. Brookfield D. J. “Friction-induced vibration of an elastic slider on a vibrating disc” Int. J. Mech. Sci. 41 325 336 1999
- Samie, F. Sheridan, D. C. “Contact analysis for a passenger car disc brake” SAE Paper 900005 1990
- Tirovic, M. Day, A. J. “Disc brake interface pressure distribution” Proc. IMechE, J. Auto. Eng. 205 137 146 1991
- Kikuchi, K. Oden, J. T. Contact Problems in Elasticity SIAM 1988
- Lauresen, T. A. Computational Contact and Impact Mechanics: Fundamentals of Modeling Interfacial Phenomena in Nonlinear Finite Element Analysis. Springer 2002
- Sextro, W. Dynamical Contact Problems with Friction: Models, Experiments and Applications Springer 2002
- Wriggers, P. Computational Contact Mechanics Wiley 2002
- Harding, P. R. J. Wintel, J. B. “Flexural effects in disc brake pads” Proc. IMechE 192 1 7 1978
- Day, A. J. Tirovic, M. Newcomb, T. P. “Thermal effects and pressure distributions in brakes” Proc. IMechE, J. Auto. Eng. 205 199 205 1991
- Ghesquire, H. Castel, L. “Brake squeal analysis and prediction” Proc. IMechE Conf. Autotech 1992 1992
- Lee, Y. S. Brooks, P. C. Barton, D. C. Crolla, D. A. “A study of disc brake squeal propensity using parametric finite element model” IMechE Conf. Trans., European Conf. on Noise and Vibration 191 201 1998
- Blaschke, P. Tan, M. Wang, A. “On the analysis of brake squeal propensity using finite element method” SAE Paper 2000-01-2765 2000
- Ouyang, H. Mottershead, J. E. Li, W. “Vibration and dynamic instability of moving load systems” The 25th International Conference on Noise and Vibration Engineering 1355 1360 Leuven, Belgium 2000
- Moirot, F. Nguyen, Q. S. “Brake squeal: a problem of flutter instability of the steady sliding solution” Arch. Mech. 52 645 661 2000
- Rumold, W. Swift, R. A. Evaluation of disc brake pad pressure distribution by multibody dynamic analysis Proc. IMechE Int. Conf. on Auto. Brakes - Braking 2002 Leeds 75 83 2002
- Lötstedt, P. “Mechanical systems of rigid bodies subjected to unilateral constraints” SIAM J Appl. Math. 42 281 296 1982
- Bathe, K.-J. Wilson, E. L. Numerical Methods in Finite element Analysis Prentice-Hall, Inc. 1976
- Tworzydlo, W. Hamzeh, O. Zaton, W. Judek, T. “Friction induced oscillations of a pin on disk slider: analytical and experimental studies” Wear 236 9 23 1999