This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A General Failure Criterion for Spot Welds with Consideration of Plastic Anisotropy and Separation Speed
Technical Paper
2003-01-0611
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A general failure criterion for spot welds is proposed with consideration of the plastic anisotropy and the separation speed for crash applications. A lower bound limit load analysis is conducted to account for the failure loads of spot welds under combinations of three forces and three moments. Based on the limit load solution and the experimental results, an engineering failure criterion is proposed with correction factors determined by different spot weld tests. The engineering failure criterion can be used to characterize the failure loads of spot welds with consideration of the effects of the plastic anisotropy, separation speed, sheet thickness, nugget radius and combinations of loads. Spot weld failure loads under uniaxial and biaxial opening loads and those under combined shear and twisting loads from experiments are shown to be characterized well by the engineering failure criterion.
Recommended Content
Technical Paper | Effects of Impact Velocity on Crush Behavior of Honeycomb Specimens |
Technical Paper | New RCAR Test-Adjusted Bumper Beam |
Technical Paper | Use of Aluminum Foam to Increase Crash Box Efficiency |
Authors
Citation
Lin, S., Pan, J., Tyan, T., and Prasad, P., "A General Failure Criterion for Spot Welds with Consideration of Plastic Anisotropy and Separation Speed," SAE Technical Paper 2003-01-0611, 2003, https://doi.org/10.4271/2003-01-0611.Also In
References
- Hartmann E. C. 1958 Mechanical Tests of Spot Welds Welding Journal 37 520 523
- Davidson J. A. 1983 A Review of the Fatigue Properties of Spot-Welded Sheet Steels SAE Technical Paper No. 830033 Society of Automotive Engineers Warrendale, Pennsylvania
- Radaj D. 1989 Stress Singularity, Notch Stress and Structural Stress at Spot-Welded Joints Engineering Fracture Mechanics 34 495 506
- Wang P.-C. Ewing K. W. 1991 Fracture Mechanics Analysis of Fatigue Resistance of Spot Welded Coach-Peel Joints Fatigue and Fracture of Engineering Materials & Structures 14 913 930
- Swellam M. H. Banas G Lawrence F. V. 1994 A Fatigue Design Parameter for Spot Welds Fatigue and Fracture of Engineering Materials & Structures 17 1197 1204
- Sheppard S. D. Pan N. 2001 A Look at Fatigue: Is Resistance Spot Welds-Notch or Crack? SAE Technical Paper No. 2001-01-0433 Society of Automotive Engineers Warrendale, Pennsylvania
- Zhang S. 2001 Recent Developments in Analysis and Testing of Spot Welds SAE Technical Paper No. 2001-01-0432 Society of Automotive Engineers Warrendale, Pennsylvania
- Vanden Bossche D. J. 1977 Ultimate Strength and Failure Mode of Spot Welds in High Strength Steels SAE Technical Paper No. 770214 Society of Automotive Engineers Warrendale, Pennsylvania
- Sawhill J. M. Furr S. T. 1981 Spot Weldibility Tests for High-Strength Steels SAE Technical Paper No. 810352 Society of Automotive Engineers Warrendale, Pennsylvania
- Ewing K. W. Cheresh M. Thompson R Kukuchek P. 1982 Static and Impact Strengths of Spot Welded HSLA and Low Carbon Steel Joints SAE Technical Paper No. 820281 Society of Automotive Engineers Warrendale, Pennsylvania
- Zuniga S Sheppard S. D. 1997 Resistance Spot Weld Failure Loads and Modes in Overload Conditions. Fatigue and Fracture Mechanics ASTM STP 1296 Piascik R. S. Newman J. C. Dowling N. E. American Society for Testing and Materials 469 489
- Lee Y.-L. Wehner T. J. Lu M.-W. Morrissett T. W. Pakalnins E. 1998 Ultimate Strength of Resistance Spot Welds Subjected to Combined Tension and Shear Journal of Testing and Evaluation 26 213 219
- Wung P. 2001 A Force-based Failure Criterion for Spot Weld Analysis Journal of Experimental Mechanics 41 107 113
- Wung P. Walsh T. Ourchane A. Stewart W Jie M. 2001 Failure of Spot Welds under In-plane Static Loading Journal of Experimental Mechanics 41 100 106
- Lin S.-H. Pan J. Wu S.-R. Tyan T. 2001 Spot Weld Failure Loads under Combined Mode Loading Conditions SAE Technical Paper No. 2001-01-0428 Society of Automotive Engineers Warrendale, Pennsylvania
- Lin S.-H. Pan J. Tyan T. Wu S.-R. Prasad P. 2002 Modeling and Testing of Spot Welds under Dynamic Impact Loading Conditions SAE Technical Paper No. 2002-01-0149 Society of Automotive Engineers Warrendale, Pennsylvania
- Lin S.-H. Pan J. Wu S.-R. Tyan T Wung P. 2002 Failure Loads of Spot Welds under Combined Opening and Shear Static Loading Conditions International Journal of Solids and Structures 39 19 39
- Lin S.-H. Pan J. Wu S.-R. Tyan T Prasad P. 2002 Failure Loads of Spot-Weld Specimens under Impact Opening and Shear Loading Conditions Experimental Mechanics
- Lin S.-H. Pan J. Tyan T Prasad P. 2002 A General Circumferential Failure Criterion for Spot Welds under Combined Loading Conditions International Journal of Solids and Structures
- Hill R. 1948 A Theory of the Yielding and Plastic Flow of Anisotropic Metals Proceedings of the Royal Society of London 193 281 297
- Hosford W. F. Caddell R. M. 1993 Metal Forming: Mechanics and Metallurgy 2nd Prentice-Hall, Inc.
- Wung P. 2001 A Method for Spot Welded Structure Analysis SAE Technical Paper No. 2001-01-0427 Society of Automotive Engineers Warrendale, Pennsylvania