This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A New Approach for Robust High-Productivity Resistance Spot Welding of Aluminium
Technical Paper
2003-01-0575
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Process consistency and long electrode-life are essential requirements for users of resistance spot welding (RSW) in the automotive industry. RSW is the dominant joining process for manufacturing automotive body structures from sheet materials. The technique is cost effective (particularly in high-volume production), makes joints rapidly, is easy to automate, and it has no per-joint consumables. These beneficial attributes apply equally to RSW of aluminium automotive structures. However, there has been some reluctance in the industry to embrace spot welding for aluminium. This is because the electrode-life is much shorter than that experienced when welding traditional uncoated, plain-carbon steels, and there is a general lack of confidence in the consistency of the process.
This paper describes a potentially non-intrusive method that addresses these concerns. By instituting a technique where the electrodes are lightly cleaned on a very regular basis, overall electrode-life is increased by at least a factor of three, and the consistency of the joining process is significantly improved. Weld failure rates are reduced below 1%, and the tensile performance of individual welds remains in a steady-state for thousands of welds. Furthermore, with the electrodes constantly maintained in good condition, on-line quality monitoring of the process becomes a practical proposition.
Recommended Content
Authors
Citation
Boomer, D., Hunter, J., and Castle, D., "A New Approach for Robust High-Productivity Resistance Spot Welding of Aluminium," SAE Technical Paper 2003-01-0575, 2003, https://doi.org/10.4271/2003-01-0575.Also In
Advances in Lightweight Materials for Automotive Applications
Number: SP-1735; Published: 2003-03-03
Number: SP-1735; Published: 2003-03-03
References
- Cornille H.J. Jr., “A High Volume Aluminum Automotive Body Structure: The Benefits and the Challenges” IBEC '93 Detroit 1993
- Scott, C.E. “Aluminium - Making Light of Volume Car Production” AutoTech '95 Birmingham, UK November 1995
- Warren, A.S. “How Light is a Lean Weight Body” Materials for Lean Weight Vehicles Conference Warwick, UK November 1997
- Hao, M. Newton, C.J. Thornton, M.C. Osman, K.O. “Resistance Spot Welding of Aluminium: Monitoring Electrode Wear and Weld Size Trends from Electrical Signals” IBEC '97 Stuttgart September-October 1997
- Dong, P. Kimchi, M. Holmes, S. “Thermo-mechanical Analysis of Electrode Wear Mechanisms: A Finite Element Study” 11 th North American Welding Conference: Advances in Welding Technology 1995
- Williams, N.T. Holliday, R.J. Parker, J.D. “Current Stepping Programmes for Maximising Electrode Campaign Life when Spot Welding Coated Steels” Science and Technology of Welding and Joining 3 6 1998
- Nippert, R.A. “Composite Resistance Welding Electrode” AWS Sheet Metal Welding Conference IX Detroit October 2000
- Browne, D.J. Hao, M. Thornton, M.C. Castle, D.R. Boomer, D.R. “A Novel Approach for the Control of Resistance Spot Welding of Aluminium” 31 st ISATA, Paper 98NM023 Düsseldorf June 1998
- Beneteau, D.J. Beneteau, M.J. “Resistance Spot Welding of Metal, Particularly Aluminum” September 1995
- Boomer, D.R. Thornton, M.C. Hao, M. Castle, D.R. “Development of a Spot Weldability Index for Comparative Assessment of Aluminium Automotive Sheet” AWS Sheet Metal Welding Conference IX Detroit October 2000
- US Military Specification “Welding, Resistance: Spot and Seam” 28 March 1978
- Graff, W.R. Sargent, D.C. “A New Grain-Boundary Etchant for Aluminium Alloys” Metallography 14 69 72 1981
- Gean, A. Westgate, S.A. Kucza, J.C. Ehrstrom, J.C. “Static and Fatigue Behaviour of Spot-Welded 5182-0 Aluminium Alloy Sheet” Welding Research Supplement AWS 78 80 86s March 1999
- Keay, B.F.P. “Welding of Aluminium for Automotive Body Assembly” AWS Sheet Metal Welding Conference V Detroit October 1992
- Hao, M. Osman, K.A Boomer, D.R. Newton, C.J. Sheasby, P.G. “On-line Nugget Expulsion Detection for Aluminium Spot Welding and Weldbonding” SAE Technical Paper 960172 Detroit February 1996
- Newton, C.J. Browne, D.J. Thornton, M.C. Boomer, D.R. “The Fundamentals of Resistance Spot Welding Aluminium” AWS Sheet Metal Welding Conference VI Detroit October 1994
- Browne, D.J. Newton, C.J. Keay, B.F.P. “Aluminium and Steel Resistance Spot Welding: Modeling the Differences” IBEC '96 Conference Detroit October 1996
- Browne, D.J. Chandler, H.W. Evans, J.T. Wen, J. James, P.S. Newton, C.J. “Computer Simulation of Resistance Spot Welding in Aluminum: Part II” Welding Research Supplement AWS 417 422s December 1995