This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Novel Fuel Borne Catalyst Dosing System for Use with a Diesel Particulate Filter
Technical Paper
2003-01-0382
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A novel dosing system for fuel borne catalyst (FBC), used to assist regeneration with a diesel particulate filter (DPF), has been developed. The system was designed for on-board vehicle use to overcome problems encountered with batch dosing systems. Important design features were simplicity, to minimise system cost, and the use of in-line dosing rather than batch dosing linked to tank refuelling.
The paper describes the development of the dosing system which continuously doses FBC into the fuel line feeding the engine injection pump. The theoretical considerations behind the concept are explored, together with the realities imposed by fuelling regimes in which a variable proportion of the fuel flowing through the injection pump is passed back to the fuel tank. Two types of system are considered, ie where 1) FBC is added to the fuel in direct proportion to the flow rate of fuel and 2) FBC is added at a constant time-based rate. Modelling of changes in the concentration of FBC in the fuel over time indicated significant non-linearity with both approaches.
Bed testing with a diesel engine equipped with a DPF assessed both flow-based and time-based dosing concepts. The test work demonstrated that the in-line FBC dosing concept could achieve reliable regeneration with either system. The averaging effect of soot accumulation over time on the ratio of metal to soot within the DPF apparently accounts for successful regeneration despite big variations in FBC concentration.
The paper describes the application of the system to light duty vehicles such as Black Cabs used in central London. Data loggers indicated successful operation on several vehicles over distances ranging from 12,000 to 20,000km. An in-line FBC dosing system was also fitted to a heavy duty fire appliance support vehicle for additional tests. Data to date suggest that this application has produced acceptable DPF regeneration performance. Test work on this vehicle continues.
Recommended Content
Technical Paper | Impact of Non-Phosphorus and Non-Ash Engine Oil on After-Treatment Devices |
Ground Vehicle Standard | Standardization of Color and Verbiage for Fuel Inlet Closures |
Technical Paper | Hydrocarbon Adsorber Technology |
Authors
Topic
Citation
Vincent, M., Richards, P., and Catterson, D., "A Novel Fuel Borne Catalyst Dosing System for Use with a Diesel Particulate Filter," SAE Technical Paper 2003-01-0382, 2003, https://doi.org/10.4271/2003-01-0382.Also In
Diesel Emission Measurement, Modeling, & Control from the SAE 2003 World Congress on CD-ROM
Number: SP-1754CD; Published: 2003-03-03
Number: SP-1754CD; Published: 2003-03-03
References
- Salvat O. Marez P. Belot G. “Passenger Car Serial Application of a Particulate Filter System on a Common Rail Direct Injection Diesel Engine” SAE 2000-01-0473
- Archimbaud, M L Hekimian G “Procedure for additivation of fuel”
- Richards P. Vincent M. W. Cook S. L. “Operating Experience of Diesel Vehicles Equipped With Particulate Filters and Using Fuel Additive For Regeneration.” SAE 2000-01-0474
- Vincent M. W. Richards P “The Long Distance Road Trial of a Combined Diesel Particulate Filter and Fuel Additive.” SAE 2000-01-2849
- Vincent M. W. Richards P. Novel-Cattin F. Marcelly B Favre C. “Fuel Additive Performance Evaluation for Volume Production Application of a Diesel Particulate Filter” SAE 2001-01-1286
- Vincent M. W. Richards P. Cook S. L. “Particulates Reduction in Diesel Engines Through the Combination of a Particulate Filter and Fuel Additive.” SAE 982654
- Terry B. Richards P Pye D. “Experience of Fitting London Black Cabs with Fuel Borne Catalyst Assisted Diesel Particulate Filters - Part 1 Regulated Emissions and Regeneration Performance” SAE 2002-01-2784
- Richards P. Terry B. Pye D. “Experience of Fitting London Black Cabs with Fuel Borne Catalyst Assisted Diesel Particulate Filters - Part 2 Non-Regulated Emissions Measurements” SAE 2002-01-2785
- Vincent M W. Richards P. Dementhon J-B. Martin B. “Improved Diesel Particulate Filter Regeneration Performance Using Fuel Soluble Additives” SAE 1999-01-3562
- Terry B. Richards P “A Method of Assessing the Low Temperature Regeneration Performance of Diesel Particulate Filters and Fuel-borne Catalysts” SAE 2000-01-1922