This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Practical Applications for Pre-formed/Over-moulded Wiring Systems
Technical Paper
2003-01-0227
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
This pre-forming method was invented at LEONI in 1989 and the process has been used in series production since 1991.
The main constituent, Polyurethane (PUR) foam, is a polymeric mixture and, can therefore be made to exhibit various qualities in accordance with the wishes of the customer. These qualities such as operating temperature range, resistivity to selective corrosive substances and so forth would be best discussed in conjunction with the many advantages of this system.
Advantages such as mechanical protection, water tightness, ease of assembly through the use of moulded- in fixing points etc… are clearly displayed in the diverse range of series components produced utilising this technology, shown in regard to both size and the relative complexity of geometry warranted by each individual case, as can be seen in a selection of grommets, or an actual form stabilised cable (FSK).
The development of these and similar products, as required by ISO 9001 standards, will be shown from the concept phase all the way through to full series tooling and beyond into re-cycling, including examples of 3D Computer Aided Design (CAD) and Rapid Product Development (RPD).
Recommended Content
Technical Paper | Development of a Method to Predict Fatigue Failure Life of Junction Block Bracket Using CAE |
Technical Paper | Predicting the Bending Life of Wire Harnesses by CAE Analysis |
Ground Vehicle Standard | Highly Accelerated Failure Test (HAFT) for Automotive Lamps with LED Assembly |
Citation
McDermott, D. and Gloesslein, M., "Practical Applications for Pre-formed/Over-moulded Wiring Systems," SAE Technical Paper 2003-01-0227, 2003, https://doi.org/10.4271/2003-01-0227.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
In-Vehicle Networks, Safety Critical Systems, Accelerated Testing, and Reliability
Number: SP-1783; Published: 2003-03-03
Number: SP-1783; Published: 2003-03-03
In-Vehicle Networks, Safety Critical Systems, Accelerated Testing, and Reliability on CD-ROM
Number: SP-1783CD; Published: 2003-03-03
Number: SP-1783CD; Published: 2003-03-03
References
- Higgins. R.A. “Properties of Engineering Materials.” Hodder and Stoughton 1982
- 0-340-179090
- Case Chiver Ross “Strength of Materials and Structures,” Hodder and Stoughton 1993
- 0-340-56829-1
- Ashby Jones “Engineering Materials 2,” Pergamon Press 1992
- 0-08-03253-7
- Casperson Paul “Applications of Polyurethane Covering for Wiring and Electronics,” SAE paper 99C-34