This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Identification and Evaluation of Technologies for the Development of a Quiet Supersonic Business Jet
Technical Paper
2002-01-2927
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The success of business jets like the Citation X, the fastest civil aircraft in use after the Concorde, highlights the need for speed to improve business and globalization. Currently, developing a supersonic business jet has many technical and economical impediments. These obstacles include sonic boom, emissions and noise requirements problems that are easily meet or do not exist for subsonic aircraft. A baseline aircraft, defined by an optimization process, is the starting point for this study. However, this baseline aircraft does not meet the sonic boom, emissions and noise requirements, which are very strict. Companion studies to this one indicate that it may be possible to meet emissions and noise requirements, but it is clear that technology infusion is necessary for the future viability of this aircraft concept to succeed. The methodology used to evaluate the different technologies is the Technology Identification Evaluation and Selection method, developed by the Aerospace Systems Design Lab, at Georgia Institute of Technology.
Authors
- Ismael Fernández - Aerospace Systems Design Laboratory, School of Aerospace Engineering, Georgia Institute of Technology
- Adam R. Krause - Aerospace Systems Design Laboratory, School of Aerospace Engineering, Georgia Institute of Technology
- Dimitri N. Mavris - Aerospace Systems Design Laboratory, School of Aerospace Engineering, Georgia Institute of Technology
Topic
Citation
Fernández, I., Krause, A., and Mavris, D., "Identification and Evaluation of Technologies for the Development of a Quiet Supersonic Business Jet," SAE Technical Paper 2002-01-2927, 2002, https://doi.org/10.4271/2002-01-2927.Also In
References
- Mavris D. N. Buonanno M.A. “Impact of Configuration and Requirements on the Sonic Boom of a Quiet Supersonic Jet” World Aviation Congress Phoenix, AZ. October of 2002 02-WAC-121
- Mavris D.N. Briceño S. I. “Quiet Supersonic Jet Engine Performance Tradeoff Analysis Using A Response Surface Methodology Approach” World Aviation Congress Phoenix, AZ October of 2002 02-WAC-120
- Karal Michael AST Composite Wing Program - Executive Summary The Boeing Company Long Beach, California March 2001
- Jegley D. C. Bush H. G. Structural Testing of Stitched/ Resin Film Infused Graphite-Epoxy Wing Box NASA Langley Research Center Hampton Virginia April 2001
- Dexter Benson H. Development of Textile Reinforced Composites for Aircraft Structures NASA Langley Research Center Proceedings of the fourth International Symposium for Textile Composites Kyoto Institute of Technology, Kyoto, Japan October 1998
- Bird R. Keith Dicus Dennis L. Evaluation of Pressurization Fatigue Life of 1441 Al-Li Fuselage Panel NASA Langley Research Center, Hampton Virginia 1999
- Arfi P. Levy Y. “Low-NOx Combustor for High Efficiency Gas Turbines” Shaping the Future sessions at Global Dialogue 3 Hannover, Germany July 2000
- Frank P. Tan Y. Griebel P. Nannen H. Eickhoff H. “Analysis of NO-Formation for Rich / Lean - Staged Combustion”
- Saounatsos Y. “Supersonic Transport Aircraft (SST) Technology Readiness and Development Risks” draft of the technical paper published in “Journal of Aerospace Engineering” July 1998 1997
- http://www.ueet.nasa.gov/types.htm
- http://www.asme.org/igti/community/committees/cer/
- Yu K. “Active Combustion Control for Advanced Propulsion Application” Florida State University October 2002
- DeLaat J. Chang C. Paxon D Saus J. Le D. “Active Combustion Control Technology” MITE Workshop on Goals and Technologies for Future Gas Turbines Atlanta, GA December of 2000
- Woods J.A Pototzky A.S Sherwood T.H Active Load Control During Rolling Maneuvers NASA Technical Paper 3455 1994
- Kirby R. M. TIES for DUMMIES 2nd Aerospace Systems Design Lab, Georgia Institute of Technology February 2001
- Mavris D. N. William T. H. “Formulation of an IPPD Methodology for the Design of a Supersonic Business Jet” Georgia Institute of Technology October 1996 Methodology 1st World Aviation Congress Los Angeles, CA October 1996
- Buonanno M. Briceno S. Fernandez I. Mavris D. “A Parametric Exploration of Supersonic Business Jet Concepts Using Response Surface Methodology.” Aircraft Technology, Integration, and Operations(ATIO) AIAA-2002-5828