This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Weighting of Parameters in Artificial Neural Network Prediction of Heavy-Duty Diesel Engine Emissions
Technical Paper
2002-01-2878
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The use of Artificial Neural Networks (ANNs) as a predictive tool has been shown to have a broad range of applications. Earlier work by the authors using ANN models to predict carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), and particulate matter (PM) from heavy-duty diesel engines and vehicles yielded marginal to excellent results. These ANN models can be a useful tool in inventory prediction, hybrid vehicle design optimization, and incorporated into a feedback loop of an on-board, active fuel injection management system. In this research, the ANN models were trained on continuous engine and emissions data. The engine data were used as inputs to the ANN models and consisted of engine speed, torque, and their respective first and second derivatives over a one, five, and ten second time range. The continuous emissions data were the desired output that the ANN models learned to predict through an iterative training process. The ANN models provide a valuable insight into the effect of different engine parameters on emissions constituents. The normalized weighted input values derived by the ANN during the iterative training process reflects the relative importance of the variables. Artificial neural network models were developed for CO2, CO, NOx, and PM emissions from a 1999 Cummins ISM 370 engine. The Cummins engine was exercised through the Federal Test Procedure (FTP), the European Stationary Cycle (ESC), the European Transient Cycle (ETC or FIGE), and a Random Cycle Generator (RCG). The weighted model inputs showed (as expected) speed and torque to be the dominant engine parameters in the formation of CO2 and NOx, and the transient engine parameters to be more significant in the formation of CO and PM. Comparison of the weighted inputs from the different cycles provided further insight into the effects of engine test cycles on emissions.
Recommended Content
Authors
Topic
Citation
Jarrett, R. and Clark, N., "Weighting of Parameters in Artificial Neural Network Prediction of Heavy-Duty Diesel Engine Emissions," SAE Technical Paper 2002-01-2878, 2002, https://doi.org/10.4271/2002-01-2878.Also In
References
- Hillard, J.C. Wheeler, R.W. “Nitrogen Dioxide in Engine Exhaust” Society of Automotive Engineers SAE 790691 88 1979
- Clark, N.N. Nine, R.D. Daley, J.J. Aatkinson, C.M. Tennant, C.J. Lyons, D.W. Peerenboom, W.H. Suski, V.A. “Heavy Duty Truck Emissions: Driving Routes and NO/NO 2 Ratios” 8 th CRC On-Road Vehicle Emissions Workshop San Diego, CA April 1998
- Clark, N.N Conley, J. Jarrett, R.P. Nennelli, A. Tóth-Nagy, C. “Emissions Modeling of Heavy-Duty Conventional and Hybrid electric Vehicles” Society of Automotive Engineers SAE Paper 2001-01-3675 2001
- Wayne, W.S. Snyder, J.M. Pertl, F.M. Atkinson, R.J. Clark, N.N. Gautam, M. “Research Approach for Aging and Evaluating Diesel Lean-NOx Catalysts” Society of Automotive Engineers SAE Paper 2001-01-3620 2001
- Johnson, T.V. “Diesel Emission Control-Last 12 Month Review” Society of Automotive Engineers SAE Paper 2000-01-2817 2001
- Dou, D. Bailey, O.H. “Investigation of NOx Adsorber Catalyst Deactivation” Society of Automotive Engineers SAE Paper 982594 1998
- Guyon, M. Blanche, P. Bert, C. Philippe, L. “NOx-Trap System Development and Characterization for Diesel Engines Emission Control” Society of Automotive Engineers SAE Paper 2000-01-2910 2000
- Miller, W.R. Klein, J.T. Mueller, R. Doelling, W. Zuerbig, J. “The Development of Urea-SCR Technology for U.S. Heavy-Duty Trucks” Society of Automotive Engineers SAE Paper 2000-01-2190 2000
- Clark, N.N Conley, J. Jarrett, R.P. Nennelli, A. Tóth-Nagy, C. “Emissions Modeling of Heavy-Duty Conventional and Hybrid electric Vehicles” Society of Automotive Engineers SAE Paper 2001-01-3675 2001
- Thompson, G.J. Atkinson, C.M. Clark, N.N. Long, T.W. Hanzevack, E.L. “Neural Network Modelling of the Emissions and Performance of a Heavy-Duty Diesel Engine” Proc. Instn. Mech. Engrs. 111 126 2000
- Messer, J.T. Clark, N.N. Lyons, D. W. “Measurement Delays and Modal Analysis For a Heavy Duty Transportable Laboratory” Society of Automotive Engineers SAE Paper 950218 1995
- Jarrett, R. J. 2000 “Evaluation of Opacity, Particulate Matter, and Carbon Monoxide From Heavy-Duty Diesel Transient Chassis Tests” Dept. of Mech. and Aero. Eng. West Virginia University, Morgantown, WV
- Ramamurthy, R. Clark N.N. Atkinson, C.M. Lyons, D.W. “Models for Predicting Transient Heavy Duty Vehicle Emissions” Society of Automotive Engineers SAE Paper 982652 1998
- Ganesan, B. Clark, N.N. “Relationship Between Instantaneous and Measured Emissions on Heavy-Duty Applications” Society of Automotive Engineers SAE Paper 2001-01-3536 2001
- “Notice of Filing of Consent Decree Under the Clean Air Act” Federal Register 63 212 Office of Records Administration Washington DC November 3 1998
- Thompson, G.J. Clark, N.N. Gautam, M. Carder, D.K. Lyons, D.W. “Inference of Torque and Power from Heavy-Duty Diesel Engines for ON-Road Emissions Monitoring” Society of Automotive Engineers SAE Paper 2002-01-0614 2002
- Jarrett, R.J. Clark, N.N. “Evaluation of Methods for Determining Continuous Particulate Matter from Transient Testing of Heavy-Duty Diesel Engines” Society of Automotive Engineers SAE Paper 2001-01-3575 2001