This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Nanoindentation of Al2O3 layer - Chrome Carbide Composite
Technical Paper
2002-01-2811
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The work revealed the possibility to improve physical, mechanical properties of oxide aluminum-based ceramic composite by CrC-based thin coatings produced by the metalorganic chemical vapor deposition. The CrC coatings heal various surface defects of the oxide aluminum that strengths and toughs the composite. The nanoindentation hardness were compared between the sample series and related to the microstructure, phase composition, and residual stress obtained by transmission electron microscopy, x-ray diffraction, and substrate curvature technique, respectively. For both series, fracture toughness was lower for the multilayer than the corresponding homogeneous films.
Authors
Topic
Citation
Kireitseu, M., "Nanoindentation of Al2O3 layer - Chrome Carbide Composite," SAE Technical Paper 2002-01-2811, 2002, https://doi.org/10.4271/2002-01-2811.Also In
References
- Bhushan B. Gupta B. K. Handbook of Tribology McGraw-Hill New York 1991 4 57
- Shinn M. Hultman L. Barnett S. A. J. Mater. Res. 7 901 1992
- Chu X. Wong M. S. Sproul W. D. Rhode S. L. Barnett S. A. J. Vac. Sci. Technol. 10 1604 1992
- Muller K. H. Phys. Rev. 35 7906 1987
- Ljungcrantz H. Hultman L. Sundgren J.-E. Karlsson L. J. Appl. Phys. 78 832 1995
- Wong M. S. Sproul W. D. Chu X. Barnett S. A. J. Vac. Sci. Technol. 11 1528 1993
- Pharr G. M. Oliver W. C. Brotzen F. R. J. Mater. Res. 7 613 1992
- Oliver W. C. Pharr G. M. J. Mater. Res. 7 1564 1992
- Powder Diffraction File No. 38-1420 ∼JCPDS International Center for Diffraction Data Swarthmore, PA 1992
- Oliver W. C. McHargue C. J. Zinkle S. J. Thin Solid Films 153 185 1987
- Lawn B. Fracture of Brittle Solids Cambridge University Press Cambridge 1993
- Hertzberg R. W. Deformation and Fracture Mechanics of Engineering Materials Wiley NY 1976 11
- Patel Jerry L. Saka Nannaji Ph.D. A new Coating Process for Aluminum Microplasmic Corp. Peabody, Mass www.microplasmic.com 2000
- Basenuk V. Kireytsev M. et al. “Development of fundamentals for technology and design of composite powder materials based on aluminum with non-metallic components…” Report under program “Material-65” INDMASH NAS Belarus, Minsk 2000
- Konyashin I. Surf. Coat. Technol. 3 1986
- Andrievsky R. Spivak I. Strength of Refractory Compounds and Materials Metallurgia Moscow 1989