This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Theoretical and Experimental Analysis of Diesel Sprays behavior from Multiple Injections Common Rail System
Technical Paper
2002-01-2777
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The present work deals with the study of the dynamic behavior of a commercial injector subject to multiple injection strategy. The global spray characteristics have been investigate as well. These studies have been carried out using two numerical codes opportunely modified in order to better simulate the injection process. Comparisons between simulation results and experimental investigations have been made in order to test the reliability of the models. This paper aims at characterizing the macro and microscopic behavior of high pressure Diesel sprays generated by a common rail injector. If it is possible, purpose of this research is to validate and to extend the different correlations available in literature to the case of sprays generated by common rail injectors, especially at high injection pressures.
Recommended Content
Authors
Citation
Brusca, S., Giuffrida, A., Lanzafame, R., and Corcione, G., "Theoretical and Experimental Analysis of Diesel Sprays behavior from Multiple Injections Common Rail System," SAE Technical Paper 2002-01-2777, 2002, https://doi.org/10.4271/2002-01-2777.Also In
References
- Stumpp, G. Ricco, M. “Common Rail - An Attractive Fuel Injection System for Passenger Car DI Diesel Engines” SAE Paper 960870 1996
- Boehner, W. Hummel, K. “Common Rail System (CR - System) for Commercial Diesel Vehicles” SAE Paper 970345 1997
- Flaig, U. Polach, W. Ziegler, G. “Common Rail Injection System for Passenger Car DI Diesel Engines; Experience with Applications for Series Production Projects” SAE Paper 1999-01-0191 1999
- Hummel K. Krieger K. Hansen N. “Evolution of the Bosch Common Rail System for Passenger Cars” “International Symposium: The Future of Diesel Engine Technology for Passenger Cars”, Paper 20A2012 Porto Cervo (Italy) October 2000
- Nehmer, D. A. Reitz, R. D. “Measurements of the Effects of Injection Rate and Split Injections on Diesel Engine Soot and NO x Emissions” SAE Paper 940668
- Tow, T. C. Pierpont, D. A. Reitz, R. D. “Reducing Particulates and NO x Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine” SAE Paper 940897
- Pierpont, D. A. Montgomery, D. T. Reitz, R. D. “Reducing Particulate and NO x Using Multiple Injections and EGR in a D.I. Diesel Engine SAE Paper 950217
- Han, Z. Uludogan, Ali Hampson, G. J. Reitz, R.D. “Mechanism of Soot and NO x Emissions Reduction Using Multiple Injection in a Diesel Engine” SAE Paper 960633
- Corcione, F. E. Mattarelli, E. Bianchi, G. M. Pelloni, P. Luppino, F. “Numerical Study of the Combustion Chamber Shape for Common Rail HSDI Diesel Engines” SAE Paper 2000-01-1179
- Bianchi, G. M. Pelloni, P. Corcione F. E. Luppino, F. “On the Optimum Combustion Chamber for the 2 nd Generation of Common Rail Injection Systems” SAE Paper 2001-01-1068
- IMAGINE AMESim May 2001
- IMAGINE Hydraulic Component Design Library May 2001
- IMAGINE AMESet May 2001
- IMAGINE “Standard Fluid Properties” Technical bulletin no. 117
- Amsden, A.A. O'Rourke, P.J. Butler, T.D. “Kiva-3: A KIVA Program with Bock-Structured Mesh for Complex Geometries” Los Alamos National Labs, LA-12503-MS 1993
- Ficarella, A. Laforgia, D. Landriscina, V. “Evaluation of Instability Phenomena in a Common Rail Injection System for High Speed Diesel Engines” SAE paper 1999-01-0192
- Bianchi, G. M. Pelloni, P. Filicori, F. Vannini, G. “Optimization of the Solenoid Valve Behavior in Common-Rail Injection Systems” SAE paper 2000-01-2042
- Bianchi, G. M. Falfari, S. Pelloni, P. Kong, S. C. Reitz, R.D. “Numerical Analysis of High-Pressure Fast-Response Common Rail Injector Dynamics” SAE paper 2002-01-0213
- Arcoumanis, C. Gavaises, M. French, B. “Effect of Fuel Injection Processes on the Structure of Diesel Sprays” SAE paper 970799
- Arcoumanis, C. Gavaises, M. “Linking Nozzle Flow with Spray Characteristics in a Diesel Fuel Injection System” Atomization and Sprays 8 307 347 1998
- Klomp, E. D. “Valve-covered-orifice (VCO) fuel injection nozzle delivery analysis” Atomization and Sprays 9 541 579 1999
- Bianchi, G. M. Pelloni, P. “Modeling the Diesel Fuel Spray Breakup by Using a Hybrid Model” SAE Paper 1999-01-0226
- Huh, K.Y. Gosman, A. D. “A Phenomenological Model of Diesel Spray Atomization” Proceedings of The International Conference on Multiphase Flows September 24 - 27 Tsukuba, Japan 1991
- O'Rourke, P. J. Amsden, A. A. “The Tab Method for Numerical Calculation of Droplet Breakup” SAE Paper 870289 1987
- Bayel, L. Orzechowski, Z. Liquid Atomization Taylor&Fransis 1993
- Habchi, C. Verhoeven, D. Huu, C. H. Lambert, L. Vanhemelryck, J. L. Baritaud, T. “Modeling Atomization and Break Up in High Pressure Diesel Spray,” SAE Paper 970881
- Corcione, F. E. Vaglieco, B. M. Corcione, G. E. Lavorgna, M. “Potential of Multiple Injection Strategy for Low Emission Diesel Engines” SAE Paper 2002-01-1150