This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modeling of a Turbocharged DI Diesel Engine Using Artificial Neural Networks
Technical Paper
2002-01-2772
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Artificial neural networks (ANN) have been recognized as universal approximators for nonlinear continuous functions and actively applied in engine research in recent years [1, 2, 3, 4, 5, 6, 7 and 8]. This paper describes the methodology and results of using the ANN to model a turbocharged DI diesel engine. The engine was simulated using the CFD code (KIVA-ERC) over a wide range of operating conditions, and numerical simulation results were used to train the ANN. An efficient data collection methodology using the Design of Experiments (DOE) techniques was developed to select the most characteristic engine operating conditions and hence the most informative data to train the ANN. This approach minimizes the time and cost of collecting training data from either computational or experimental resources. The trained ANN was then used to predict engine parameters such as cylinder pressure, cylinder temperature, NOx and soot emissions, and cylinder heat transfer. The ANN model will replace the cylinder and heat release models of a system simulation with significantly improved predictive capability. The model will be important in future control development and diesel aftertreatment work.
Recommended Content
Technical Paper | Ignition Delay Period of Jojoba Diesel Engine Fuel |
Technical Paper | Pressure Reduction in Intake System of a Turbocharged-Inter Cooled DI Diesel Engine Using CFD Methodology |
Technical Paper | Combustion Model for Rapid Prototyping |
Authors
Topic
Citation
He, Y. and Rutland, C., "Modeling of a Turbocharged DI Diesel Engine Using Artificial Neural Networks," SAE Technical Paper 2002-01-2772, 2002, https://doi.org/10.4271/2002-01-2772.Also In
References
- Haykin, S. Neural Networks: A Comprehensive Foundation Prentice Hall 2nd 1999
- Müller, R. Hemberger, H. H. “Neural Adaptive Ignition Control,” SAE Paper 981057 1998
- Hellring, M. Munther, T. Rögnvaldsson, T. Wickström, N. Carlsson, C. Larsson, M. Nytomt, J. “Spark Advance Control Using the Ion Current and Neural Soft Sensors,” SAE Paper 1999-01-1162 1999
- Yoon, P. Park, S. Sunwoo, M. Ohm, I. Yoon, K. J. “Closed-Loop Control of Spark Advance and Air-Fuel Ratio in SI Engines Using Cylinder Pressure,” SAE Paper 2000-01-0933 2000
- Grimaldi, C. N. Mariani, F. “OBD Engine Fault Detection Using a Neural Approach,” SAE Paper 2001-01-0559 2001
- Ayeb, M. Lichtenthäler, D. Winsel, T. Theuerkauf, H. J. “SI Engine Modeling Using Neural Networks,” SAE Paper 980790 1998
- Traver, M. L. Atkinson, R. J. Atkinson, C. M. “Neural Network-Based Diesel Engine Emissions Prediction Using In-Cylinder Combustion Pressure,” SAE Paper 1999-01-1532 1999
- He, Y. Rutland, C. J. “Application of Artificial Neural Network for Integration of Advanced Engine Simulation Methods,” Proceedings of the 2000 Fall Technical Conference of the ASME Internal Combustion Engine Division 35-1 53 64 2000
- He, Y. “Integration of Advanced Simulation Methods for Diesel Engine Design,” Ph.D. Preliminary Examination Report Dept. of Mechanical Engineering, University of Wisconsin Madison 2001
- Rutland, C. J. Ayoub, N. Han, Z. Hampson, G. Kong, S. -C. Mather, D. Montgomery, D. Musculus, M. Patterson, M. Pierpoint, D. Ricart, L. Stephenson, P. Reitz, R. D. “Diesel Engine Model Development and Experiments,” SAE paper 951200 , SAE Transactions Journal of Engines 104 1688 1706 1995
- Rutland, C. J. Eckhause, J. Hampson, G. Hessel, R. Kong, S. -C. Patterson, M. Pierpont, D. Sweetland, P. Tow, T. Reitz, R. D. “Predictive Modeling of Diesel Engine Intake Flow, Combustion, and Emissions,” SAE Paper 941897 , SAE Transactions Journal of Engines 103 602 620 1994
- Reitz, R. D. Rutland, C. J. “Development and Testing of Diesel Engine CFD Models,” Prog. Energy Combust. Sci. 21 173 196 1995
- Moskwa, J.J. Hedrick, J.K. “Modeling and Validation of Automotive Engines for Control Algorithm Development,” ASME Journal of Dynamic Systems, Measurement, and Control 114 2 278 285 June 1992
- Wang, W. “Dynamic Powertrain System Modeling and Simulation with Applications for Diagnostics, Design, and Control,” Dept. of Mechanical Engineering, University of Wisconsin Madison 2000
- Moskwa, J. J. Wang, W. “Simplified Engine Combustion Diagnostics Using ‘Synthetic’ Variables,” SAE Paper 2000-01-0364 2000
- He, Y. “Development of a Diesel Engine Simulation Tool using Artificial Neural Networks,” Dept. of Mechanical Engineering, University of Wisconsin Madison 2002
- Hagan, M. T. Menjaj, M. B. “Training Feedforward Networks with the Marquardt Algorithm,” IEEE Transactions on Neural Networks 5 6 989 993 1994
- Nguyen, D. Widrow, B. “Improving the Learning Speed of 2-Layer Neural Networks by Choosing Initial Values of the Adaptive Weights,” Proceedings of International Joint Conference of Neural Network 3 21 26 1990
- Villiers, J. Barnard, E. “Backpropagation Neural Nets with One and Two Hidden Layers,” IEEE Transactions on Neural Networks 4 1 136 141 1992
- Amsden, A. A. “KIVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves,” Los Alamos National Laboratory Report No. LA-13313-MS 1997
- Zhu, Y. Reitz, R. D. “A 1-D Gas Dynamics Code for Subsonic and Supersonic Flows Applied to Predict EGR Levels in a Heavy-Duty Diesel Engine,” International Journal of Vehicle Design 22 227 252 1999
- Box, G. E. P. Hunter, W. G. Hunter, J. S. Statistics for Experimenters John Wiley and Sons New York, NY 1978
- Senecal, P. K. “Development of a Methodology for International Combustion Engine Design using Multi-Dimensional Modeling with Validation Through Experiments,” Dept. of Mechanical Engineering, University of Wisconsin Madison 2000