This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modelling Methodology of a Spark-Ignition Engine and Experimental Validation: Part II: Gas Exchange Process
Technical Paper
2002-01-2194
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents an optimized methodology for the development and calibration of a 1D pipe system model of a spark-ignition engine, the procedure has been also experimentally validated.
From experimental tests in a steady flow rig and using data from different sources, the following pressure loss coefficients are determined: effective area of the filter, discharge coefficients of the throttle valve, plenum-runner interface and cylinder valve ports. As a particular improvement, a new formula is developed to allow the pressure loss in pipe bends to be concentrated in an initial or final pipe section.
Synchronized measurements of unsteady pressure, flow velocity and temperature, with appropriate time resolution in different points of the intake and exhaust manifolds, have been accomplished. Different engine regimes are analysed and experimental measurements are obtained.
Finally, a full comparison is made of the experimental and numerical results using the simple 1D model developed, and an analysis of the model capacity to predict the real flow measured in the test engine is carried out.
Recommended Content
Authors
Citation
Grau, J., García, J., García, J., Robles, A. et al., "Modelling Methodology of a Spark-Ignition Engine and Experimental Validation: Part II: Gas Exchange Process," SAE Technical Paper 2002-01-2194, 2002, https://doi.org/10.4271/2002-01-2194.Also In
References
- Winterbone D.E. Pearson R.J. Theory of Engine Manifold Design Professional Engineering Publishing 1-86058-209-5 2000
- Royo R. Corberán J.M. Rougier F. Thomas F. Trinidad M. Martín A. Morán L. Maximizing the Torque Potential at Full Load of a 1.8 L SAE paper 980776 1998
- de Risi A. Zecca R. Laforgia D. Optimization of a Four Stroke Engine by Means of Experimental and 1D Numerical Analysis SAE paper 2000-01-0566 2000
- Blair G.P. Mackey D.O. Racing Engine Design Options SAE paper 2000-01-3546 2000
- Chevalier A. Müller M. Hendricks E. On the Validity of Mean Value Engine Models During Transient Operation SAE paper 2000-01-1261 2000
- Hirsch C. Numerical Computation of Internal and External flows 2 Computational Methods for Inviscid and Viscous Flows John Wiley and Sons Chichester 1990
- Toro E.F. Riemann Solvers and Numerical Methods for Fluid Dynamics Springer Verlag Berlin 1992
- Thermal Systems Research and modeling http://www.imst.upv.es 2001
- Mattarelli E. Valentini A. On the Flow Modeling Through the Valve Assembly in Engine Cycle Simulations SAE paper 2000-01-0570 2000
- Blair G.P. Drouin F.M. Relationship Between Discharge Coefficients And Accuracy Of Engine Simulation SAE paper 962527 1996
- Sierens R. Van Hove W. Snawwert P. Comparison Of Measured And Calculated Gas Velocities In The Inlet Channel Of A Single Cylinder Reciprocating Engine Proc. Inst. Mech. Eng., Part A, J. Power Eng. 198 61 69 1984
- Arcoumanis C.A. Whitelaw J.H. Flamang P. Flow In The Inlet Manifold Of A Production Diesel Engine Proc. Int. Mech. Eng. 208 39 49 1989
- Corberán J.M. Gascón M. LL. TVD Schemes for the Calculation of Flow in Pipes of Variables Cross-Section Mathematical and Computer Modelling Pergamon Press 1995
- Harten A. High Resolution Schemes for Hyperbolic Conservation Laws Journal of Computational. Physics 49 357 393 1993
- Roe P.L. Approximate Riemann Solvers, Parameter Vectors and Difference Schemes Journal of Computational. Physics 18 248 283 1975
- Hernández Grau J. Martínez García J. Pérez García J. Viedma Robles A. Identification of Modelling Methodology of a Spark-Ignition Engine and Experimental Validation. Part I: Single-Zone Combustion Model SAE paper 2002-01-2193 2002
- Miller D.S. Internal Flow Systems BHRA Fluid Engineering Series 1978
- Compressible Flow Of Gases Pressure Losses And Discharge Coefficients Of Orifice Plates, Perforated Plates And Thick Orifice Plates In Ducts 1982
- Idelchik I.E. Handbook of Hydraulic Resistance 3a Begell House 1996
- Pressure Losses in Curved Ducts: Single Bends 1995
- Blair G.P. Design and Simulation of Four Stroke Engines Society of Automotive Engineers, Inc. 1995