This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Effect of Modulus and Thermal Diffusivity on Sintered Metal Performance
Technical Paper
2002-01-1438
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Sintered materials were used in some of the earliest friction applications, however paper materials have displaced most sintered materials due to their cost and performance advantages. The sintered materials continue to be used in many applications because of their high thermal diffusivity, while paper materials are often the friction material of choice because of their low modulus. A new material has been developed that combines many of the advantages of paper materials as well as advantages of sintered materials. The new sintered material, 1340V2, has the thermal diffusivity of a sintered material and the modulus of a paper material. The unique combination of low modulus and high thermal diffusivity gives 1340V2 a superior ability to dissipate and distribute the heat of engagement. This allows 1340V2 to be a candidate for severe or “oil-starved” applications and has less tendency to cause hot spotting of the reaction plates.
Recommended Content
Technical Paper | High Performance P/M Stainless Steels |
Citation
Lloyd, F. and Silverthorne, W., "The Effect of Modulus and Thermal Diffusivity on Sintered Metal Performance," SAE Technical Paper 2002-01-1438, 2002, https://doi.org/10.4271/2002-01-1438.Also In
References
- Lloyd F. A. DiPino M. A. “Advances in Wet Friction Materials, 75 Years of Progress” SAE Paper 800977 International Off-Highway Meeting and Exposition Milwaukee, Wisconsin September 1980
- Ohkawa S. Kuse T. Kawasaki N. Shibata A. Yamashita M. “Elasticity - An Important Factor of Wet Friction Materials” SAE Paper 911775 International Off-Highway and Powerplant Congress and Exposition Milwaukee, Wisconsin September 1991
- Hayashi K. Suzuki A. “Analysis of Friction Characteristics in the Engagement Process of Paper Friction Materials” Japan Assn. Of Tribology Tribology Conference Papers 1994-10
- Lloyd F. A. Anderson J. N. Bowles L. S. “Effects of Operating Conditions on Performance of Wet Friction Materials: A Guide to Material Selection” SAE Paper 881280 International Off-Highway Meeting and Exposition Milwaukee, Wisconsin September 1988
- Zagrodzki P. Analysis of Thermomechanical Phenomena in Multidisc Clutches and Brakes Wear 140 1990 291 308
- Zagrodzki P. Farris T. D. “Analysis of Temperature and Stresses in Wet Friction Disks Involving Thermally Induced Changes of Contact Pressure” SAE Paper 982035 International Off-Highway and Powerplant Congress and Exposition Milwaukee, Wisconsin September 1993
- Lloyd F. A. Reffett T. Wyatt D. “Static Friction - What It Is, and What Affects It” SAE Paper 941034 International Congress and Exposition Detroit, Michigan March 1994
- SAE Standards J1646 “Glossary of Terms Lubricated Friction Systems” July 1996
- Friesen T. V. “Chatter in Wet Brakes” SAE Paper 831318 International Off-Highway Meeting and Exposition Milwaukee, Wisconsin September 1983
- Lee K. Barber J. R. Frictionally-Excited Thermoelastic Instability in Automotive Disc Brakes ASME Journal of Tribology 115 1993 607 614
- Anderson A. E. Knapp R. A. Hot Spotting in Automotive Friction Systems Wear 135 1990 319 337