This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Theoretical Analysis of the Fuel Stream in the Gasoline Direct Injection Engine
Technical Paper
2002-01-1283
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper presents a mathematical model describing kinetic behaviour of the injected fuel stream in a Gasoline Direct Injection Engine. Mathematical analysis of the stream aims at calculating the time length the stream requires to reach the piston, rebound from it, and reach the electrodes of the spark plug. The results of the performed analysis were given in following parts of this paper.
Recommended Content
Authors
Citation
Sendyka, B. and Cygnar, M., "Theoretical Analysis of the Fuel Stream in the Gasoline Direct Injection Engine," SAE Technical Paper 2002-01-1283, 2002, https://doi.org/10.4271/2002-01-1283.Also In
References
- Abraham J. Bracco F.V. “Fuel-Air Mixing and Distribution in a Direct Injection Stratified-Charge Rotary Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Alcock J.F. Robson F.V.B. Mash C. “Distribution of Heat Flow in High Duty Internal Combustion Engines” CIMAC 723 49
- Alger T. Hall M. Matthews R. “The Effect of In-Cylinder Flow Fields and Injection Timing on Time-Resolved Hydrocarbon Emissins in a 4-Valve, DISI Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Amsden A.A. “KIVA-3: A KIVA Program with Block-Structures Mesh for Complex Geometries” Los Alamos Labs 1993
- Blair G.P. 1996 “Design and Simulation of Two-Stroke Engines” SAE Warrendale, Pennsylvania, USA
- Brehob D.D. Fleming J. Haghgoogi M. Stein R.A. “Stratified-Charge Engine Fuel Economy and Emission Characteristics” SAE Paper 982704
- Castagne M. Cheve E. Dumas P. Henriot S. “Advanced Tools for Analysis of Gasoline Direct Injection Engines” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Han Z. Fan L. Reitz R.D. „Multidimensional Modeling of Spray Atomization and Air Fuel Mixing in a Direct Injection Spark Ignition Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Han Z. Reitz R.D. Yang J. Anderson R.W. „Effects of Injection Timing on Air Fuel Mixing in a Direct Injection Spark Ignition Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Harada J. „Development of Direct Injection Gasoline Engine” SAE 970540 International Congress & Exposition Feb 1996 USA
- Henriot S. Chaouche A. „Small Bore GDI Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Houston R. Cathcart G. „Combustion and Emissions Characteristics of Obital's Combustion Process Applied to Multi-Cylinder Automotive Direct-Injected, 4-Stroke Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Iiyama A. „Direct Injection Gasoline Engines” Technical Seminar at Wayne Stete University 1996
- Ikeda Y. Hosokawa S. Sekihara F. Nakajima T. „Cycle-Resolved PDA Measurement of Size-Classified Spray Structure of Air-Assist Injector” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Iwamoto Y. „Development of Gasoline Direct Injection Engine” SAE 970541 International Congress & Exposition Feb 1997 USA
- Johnson B.E. Stovell C. Matthews R. Kirwan J. Ng H. Larsen B. „Effect of Fuel Parameters on FTP Emissions of a 1998 Toyota with a Direct Injection Spark Ignition Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Kano M. Saito K. Basaki M. Matsushita S. Gohno „Analysis of Mixture Formation of Direct-Injection Gasoline Engine” Gasoline Direct Injection Engine SAE International Congress 2000 USA
- Karl G. „Analysis of a Direct Injected Gasoline Engine” SAE 970624 International Congress & Exposition Feb 1997 USA
- Kato S. Onishi S. „Durect Fuel Injection Stratified Charge Engine by Impingement of Fuel Jet (OSKA) - performance and combustion charakteristics SAE Papers, No 871689
- Kiyota Akishino Y. Ando H. „Combustion Control Technologies for Direct Injection SI Engines” FISITA 1996
- Kono S. „Study of the „Cardera” Stable Combustion Method in DI Gasoline Engine” FISITA 235 240 1995
- Kume T. Iwamoto Y. „Combustion Control Technologies for Direct Injection SI Engine” SAE 960600 International Congress & Exposition Feb 1997 USA
- Kuo T.W. Reitz R.D. „Three-Dimensional Computations of Combustion in Premixed-Charge and Direct-Injected Two-Stroke Engines” Gasoline Direct Injection Engine SAE International Congress 2000 USA