This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Investigation of a DISI Fuel Injector for a Close-Arranged Spray-Guided Combustion System
ISSN: 0148-7191, e-ISSN: 2688-3627
Published March 04, 2002 by SAE International in United States
Annotation ability available
The spray characteristics of a single-fluid pressure-swirl outward-opening DISI injector, with a nominal operating fuel pressure of 20 MPa. are presented for various ambient pressure and temperature conditions. These data include the experimental investigations of the spray structure and its temporal development with the aid of the imaging technique; PDA measurements of the temporal evolution of the droplet size - velocity characteristics; and the LIF-PLIF measurements of the spray liquid- and-vapor phases development. The experiments pertain to atmospheric and elevated ambient air conditions (P = 0.1 - 1.2 MPa., T = 20.° - 400.° C), representative of turbo-charged and high EGR engine operating conditions.
This injector is incorporated in a single-cylinder DISI engine in a “narrow-spacing” arrangement that adopts a spray-guided air-assisted stratified-charge combustion concept, labeled “direct injection spray and air controlled” (DISAC) combustion system. The preliminary combustion data, demonstrating the fuel-saving and emissions potential of the combustion system for lean-stratified operations are presented and discussed.
- B. Befrui - Technical Centre Luxembourg, Delphi Automotive Systems
- R. Kneer - Technical Centre Luxembourg, Delphi Automotive Systems
- S. Breuer - Technical Centre Luxembourg, Delphi Automotive Systems
- W. Reckers - Technical Centre Luxembourg, Delphi Automotive Systems
- D. Robart - Technical Centre Luxembourg, Delphi Automotive Systems
- H. Wanlin - Technical Centre Luxembourg, Delphi Automotive Systems
- C. Weiten - Technical Centre Luxembourg, Delphi Automotive Systems
CitationBefrui, B., Kneer, R., Breuer, S., Reckers, W. et al., "Investigation of a DISI Fuel Injector for a Close-Arranged Spray-Guided Combustion System," SAE Technical Paper 2002-01-1133, 2002, https://doi.org/10.4271/2002-01-1133.
- Kume, T., Iwamoto, Y., Iida, K., Murakami, M., Akishino, K. and Ando, H., “Combustion control technologies for direct injection SI engine”, SEA Technical Paper No. 960600, 19996.
- Zhao, F. Lai, M.-C., Harington, D. L., “Automotive spark ignited direct-injection gasoline engines”, Progress in Energy and Combustion Science, 25, 437-562, 1999.
- Scherenberg, H., “Rückblick uber 25 Jahre Benzin-Einspritzung in Deutschland” MTZ, 16,1955
- Scussei, A.. J., Simko, A. O. and Wade, W. R. “The Ford PROCO engine update”, SAE Technical Paper No. 780699, 1978.
- Frank, R. M. and Heywood, J. B., “Combustion characterization in a direct-injection stratified-charge engine and implications on hydrocarbon emissions”, SAE Technical Paper No. 892058, 1989.
- Schäpertöns, H., Emmenthal, K. D., Grabe, H.J. and Oppermann, W., “VW's gasoline direct injection (GDI) research engine”, SAE Technical Paper No. 910054, 1991.
- Varble, D., Mieney, S., and Xu, M., “Design, Modeling and Development of a Unique gasoline Direct Injection Fuel System”, ISATA paper 98VR028, Dusseldorf, Germany, 1998.
- Varble, D., Xu, M., VanBrocklin, P., “Development of a unique Outwardly-Opening direct injection gasoline injector for stratified-charge combustion”, Aachen Colloquium Automobile & Engine Technology, 5-7 October 1998.
- Robart, D., Kneer, R. and Lai, M.-C., “Application of a high temporal resolution laser diffraction technique to the characterization of gasoline direct injection sprays”, Haus der Technik Fachbuch Direkteinspritzung in Ottomotor III, Expert-Verlag, 169 - 187, 2001
- Robart, D., Breuer, S., Reckers, W., Kneer, R, “Assessment of pulsed gasoline fuel sprays by means of qualitative and quantitative laser based diagnostic methods”, 10th International Symp. On Application of laser technique to Fluid Mechanics, Lisbon, 10-13 July, 2001
- Delphi ROI No. DP-306303, Sept. 9, 2001