Predictions for Nucleate Boiling - Results From a Thermal Bench Marking Exercise Under Low Flow Conditions

Authors

• N. A. F Campbell - University of Bath
• J. G. Hawley - University of Bath
• K. Robinson - University of Bath
• S. Joyce - Visteon UK Ltd
• M. Haigh - Visteon UK Ltd

Topic

• Heat transfer
• Simulators
• Tools and equipment

Citation

Also In

References

1. Campbell NAF “The Influence of Nucleate Boiling in Engine Cooling and Temperature Control” University of Bath 2001
2. Campbell NAF Hawley JG Leathard MJ Horrocks RW Wong L “Nucleate Boiling Investigations and the effects of Surface Roughness.” SAE 1999-01-0577 SAE Congress Detroit March 1-4 1997
3. Campbell NAF Hawley JG Tilley DG Horrocks RW Wong L “Nucleate Boiling Investigations Using Simulated Engine Cooling Passages.” VTMS 4 May 1999
4. Incropera FP DeWitt DP “Fundamentals of heat and mass transfer” John Wiley & Sons 1990
5. Rohsenow WM Choi HY “Heat, mass and momentum transfer” Prentice-Hall Inc 1961
6. Chen JC “Correlation for boiling heat transfer to saturated fluids in convective flow.” I&EC Process Design and Development 5 3 Jul 1966
7. Winterton RHS “Where did the Dittus and Boelter equation come from?” Int. J Heat Mass Transfer 41 4-5 809 810 1998
8. Collier JG Thome JR “Convective boiling and condensation” Clarendon Press Oxford 1994
9. Rohsenow WM “A method of correlating heat transfer data for surface boiling of liquids.” Transactions of the ASME 74 969 976 August 1952
10. Dhir VK “Nucleate and transition boiling heat transfer under pool and external flow conditions.” International Journal of Heat and Fluid Flow Dec 1991 12 4 290 314
11. Son G Dhir VK Ramanujapu N “Dynamics and heat transfer associated with a single bubble during nucleate boiling on a horizontal surface.” Journal of Heat Transfer, Transactions ASME 121 3 1999 623 631
12. Forster HK Zuber N “Dynamics of vapour bubbles and boiling heat transfer.” A.I.Ch.E. Journal 1 4 531 535 December 1955
13. Union Carbide “Ethylene glycol.” Union Carbide Chemicals and Plastics Technology Corporation 1991
14. Reid RC Prausnitz JM Poling BE “The properties of gases and liquids.” McGraw-Hill 1987
15. Evans JW Light JT “Expanding the limits on engines and vehicles imposed by circulating liquid engine cooling systems.” SAE 861428 1986
16. Kreith F Bohn MS “Principles of heat transfer.” Harper and Row 1986
17. Gollin M McAssey EV Stinson C “Comparative performance of ethylene glycol/water and propylene glycol/water coolants in the convective and forced flow boiling regimes.” SAE Paper 950464 Feb Mar 1995
18. Gnielinski V “New equations for heat and mass transfer in turbulent pipe and channel flow.” Int. Chem. Eng. 16 2 359 368 1976
19. Wambsganss MW France DM Jendrzejczyk JA Tran TN “Boiling Heat Transfer in a Horizontal Small-Diameter Tube.” Journal of Heat Transfer, Transactions of the ASME 115 Nov 1993
20. French CCJ “Taking the heat off the highly boosted diesel.” SAE 690463 1969
21. Smith LWL Angus HT Lamb AD “Cracking in cast iron diesel engine cylinder heads.” Combustion Engines Group, Proc. Instn. Mech. Engrs 185 58 71 807 823 1970-71
22. Boyle RJ Finlay IC Biddulph T Marshall RA “Heat transfer to non-aqueous engine coolants.” SAE 910304 1991
23. Finlay IC Boyle RJ Pirault JP Biddulph T “Nucleate and film boiling of engine coolants flowing in a uniformly heated duct of small cross section.” SAE 870032 1987
24. Perry RDH Anderton D “Design and operation of representative test rig to operate at very high heat flux.” ISVR Memorandum No 660 Sept 1985
25. McAssey EV Stinson C Gollin M “Evaluation of Engine Coolants under flow boiling conditions.” Proc. ASME Heat transfer division 317-1 1995
26. Ambrogi G McAssey EV Cozzone G “The effect of off-design operation on the thermal performance of propylene glycol and ethylene glycol engine coolants.” SAE 971827
27. Bhowmick C McAssey EV Gollin M “Heat transfer performance of engine coolants under sub-cooled boiling conditions.” Proc. ASME Internal Combustion Engine Division Part 2 (of 3) Apr 21-24 1996
28. Bhowmick S Branchi C McAssey EV Gollin M Cozzone G “Prediction of heat transfer in engine cooling systems.” Proceedings of the 4th World conference on experimental heat transfer 1997
29. Cipolla G “Heat transfer correlations applicable to the analysis of IC engine head cooling.” Proceedings of the International Centre for Heat and Mass Transfer 1989 373 396
30. Bennett DL Chen JC “Forced convective boiling in vertical tubes for saturated pure components and binary mixtures.” AICHE Journal 26 3 454 May 1980
31. Finlay IC Harris D Boam DJ Parks BI “Factors influencing combustion chamber wall temperatures in a liquid-cooled, automotive, spark-ignition engine.” Proceedings of the Institution of Mechanical Engineers, Part D: Transport Engineering 1985 199 3 207 214
32. Norris PM Hastings MC Wepfer WJ “An experimental investigation of liquid coolant heat transfer in a diesel engine.” SAE 891898 1989
33. Stone R. “Introduction to internal combustion engines” Basingstoke Macmillan 1992
34. Owen NJ Robinson K Jackson NS “Quality assurance for combustion chamber thermal boundary conditions - a combined experimental and analytical approach.” SAE 931139

Cited By