This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Green Manufacturing: Eliminating Lead from Vehicles by Using Tin-Enhanced Free Machining Steels
Technical Paper
2002-01-1000
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A newly developed tin-bearing, free machining steel, 12T14, has been evaluated at production-scale. Comparing to lead-containing 12L14 and 1215 steels, 12T14 has proven to be equal or superior in terms of machinability.
Authors
Topic
Citation
Garcia, C., Hua, M., and DeArdo, A., "Green Manufacturing: Eliminating Lead from Vehicles by Using Tin-Enhanced Free Machining Steels," SAE Technical Paper 2002-01-1000, 2002, https://doi.org/10.4271/2002-01-1000.Also In
References
- Shaw, M.C. Smith, P.A. Cook, N.H. “Free Machining Steel I,” J. Eng. Ind. , (Trans. ASME, ser B) 83 May 1961 163
- Shaw, M.C. Smith, P.A. Cook, N.H. “Free Machining Steel II,” J. Eng. Ind. , (Trans. ASME, ser B) 83 May 1961 175
- Joseph, R.A Tipnis, V.A. “The Influence of Non-Metallic Inclusions on the Machinability of Free Machining Steels,” Influence of Metallurgy on Machinability American Society for Metals Metals Park, OH 1975 55 72
- Aborn, R.H. “Role of Additives in the Machinability of Steel,” Int. Symposium on Influence of Metallurgy on Machinability of Steel Tokyo September 26-28 1977 381 395
- Ramalingam, S. Basu, K. Malkin, S. Deformation Index of MnS Inclusions in Resulfurized and Leaded Steels,” Mat. Sci. Engineering 4 July 1986 214
- Merchant, M.E. Zlatin, N. “Basic Reasons for Good Machinability of Free-Machining Steels,” Trans. ASM 41 1949 647 641
- Bougler, F.W. Hartner, H.E. Lankford, W.T. Garvey, T.M. “Force Relationship in the Machining of Low-Carbon Steels of Different Sulphur Contents,” Trans. ASME 79 1957 1155
- Shaw, M.C. Smith, P.A. Cook, N.H. Loewen, E.G. “Leaded Steel and the Real Area of Contact in Metal Cutting,” Trans. ASME 79 1957 1167
- Loewen, E.G. Shaw, M.C. “On the Analysis of Cutting-Tool Temperatures,” Trans. ASME 76 1954 217
- Yamaguchi, K. Kato, T. “Friction Reducing Actions of Inclusions on Metal Cutting,” J. Eng. Ind. (Trans. ASME, ser.B.) 102 August 1980 221 228
- 31 st Mechanical Working and Steel Processing Conference Proceedings Chicago October 22-25 1989 “The Relationship Between Inclusions and the Machinability of Steel Apple C.A. Warrendale, PA The Iron and Steel Society 1990 422
- Stoloff, N.S. Johnston, T.L. “Crack Propagation in a Liquid Metal Environment,” Acta Met. 11 1963 251 256
- Mostovoy, S. Breyer, N.N. “The Effect of Lead on the Mechanical Properties of 4145 Steel,” Trans. ASM. 62 2 1968 219 232
- Yaguchi, H. “Effect of soft additives (Pb/Bi) on Machinability of Low Carbon Resulphurized Free Machining Steels.” Mat. Sci. Tech 5 March 1989 255 267
- Bhattacharya, D. “Effects of Metal Induced Embrittlement in Free Machining Steels,” Embrittlement by Liquid and Solid Metals Kamdar M.H. AIME 1984 367 398
- Komanduri, R. Brown, R.H. “The Formation of Microcracks in Machining a Low Carbon Steel,” Met. Mat. 6 December 1972 531
- Tipnis, V.A. Cook, N.H. “Influence of MnS-Bearing Inclusions on Flow and Fracture in a Machining Shear Zone,” Proc. Mechanical Working and Steel Processing IV AIME 1965 285 308
- McClintock, F.A. “A Criterion for Ductile Fracture by the Growth of Holes,” J. Appl. Mechanics 35 1968 363 371
- Usui, E. Shaw, M.C. “Free Machining Steel-IV,” J. Eng. Ind. , (Trans. ASME, ser B) 84 February 1962 89 97
- Ramalingam, S. Basu, K. Hazra, J. “The Role of Lead and its Effect on MnS Inclusions in Leaded Free Cutting Steels,” Proceedings Third North American Metalworking Conference Pittsburgh May 5-7 1975 Carnegie Press Pittsburgh, Pennsylvania 1975 374 384
- Iwata, K. Ueda, K. “The Effect of Lead on Crack Behavior of Leaded Free Machining Steel During Controlled Cutting Temperature Micro-Machining,” Proceedings Fourth North American Metalworking Conference SME 1976 326 333
- Garcia, C.I. Gao, W. DeArdo, A.J. “Hot Ductility Behavior Of Free Machining Steels,” Basic Metals Processing Research Institute, Internal Report University of Pittsburgh 1998
- Seah, M.P. “Segregation and the Strength of Grain Boundaries,” Proc. R.Soc. London 1976 A349 535 554
- Hondros, E.D. “Interfacial Energies and Composition in Solids,” Precipitation Processes in Solids Russell, K.C. Aaronson, H.I. The Metallurgical Society of AIME 1978 1 30
- Aust, K.T. “Grain Boundary Engineering,” CIM Montreal 1993 197 228
- Hondros, E.D. Seah, M.P. Scripta Metallurgica 1972 6 1007 1012
- Sea, M.P. Acta Metallurgica 1980 28 955
- Hirth, P.J. Rice, J.R. Metallurgical Transactions 1980 11A 1501
- McLean, D. Grain Boundaries in Metals Clarendon Press Oxford, United Kingdom 1957
- Messmer, R.P. Briant, C.L. Acta Metallurgica 1982 30 457 467
- Briant, C.L. Grabke, H.J. “Grain Boundary Segregation in Iron and Its Alloys and Its Effect on Intergranular Fracture,” Materials Science Forum 46 1989 253 276
- DeArdo, A.J. Garcia, C.I. “Tin-Bearing Free Machining Steel,” October 5 1999
- DeArdo, A.J. Garcia, C.I. “Free-Machining Steels Containing Tin, Antimony and/or Arsenic,” March 13 2001
- Brenner, S.S. Miller, M.K. “Atomic Scale Analysis with the Atom Probe,” J. Metals 35 3 1983 54 58
- The Volvo Standard Machinability Test The Volvo Laboratory for Manufacturing Research Trollhattan, Sweden 1989
- Radulescu, A.G. Ashton, J.D. Broughton, L.R. Dallman, J.G. “Machinability Comparison of Tin-Bearing Replacement for Free-Machining Steels (12L14/ SAE 1215),” 43 rd Mechanical Working and Steel Processing Conference Proceedings Iron and Steel Society Warrendale, PA. 2001 45 65