This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
DEVELOPMENT OF AN OCCUPANT POSITION SENSOR SYSTEM TO IMPROVE FRONTAL CRASH PROTECTION
Technical Paper
2001-06-0058
Annotation ability available
Sector:
Language:
English
Abstract
In motor vehicle crashes where an occupant has been seriously or fatally injured from a deploying air bag, a common finding has been that the occupant was in close proximity to the air bag (or out-of-position) at the time of deployment. The occupant may have been out-of-position for a variety of reasons including: driver loss of consciousness, pre-impact braking, multiple impacts, rear facing child seat installation, or late firing of the air bag after the occupant has already been forced against the air bag by the crash deceleration. Considerable research has been initiated to develop new or enhanced injury countermeasures to mitigate injuries to persons, particularly children, who are out-of-position at the time of air bag deployment. This paper reports on the development of an occupant position sensor that might be used in conjunction with dual stage or multi-stage inflation technologies for modulating air bag deployment.
The occupant position sensor system described in this paper uses ultrasonic transducers in conjunction with pattern recognition algorithms for the discrimination of out-of-position occupants and rear facing child safety seats. Four ultrasonic transducers operating at 40 kHz, located strategically within the occupant compartment, emit unfocused, wide-beam pulses toward the passenger volume. These pulses are emitted sequentially and each produce return echoes which contain information for discrimination in approximately 10 msec. Thus, the occupant position is updated every 40 msec. The decision algorithm processes the returned information to classify the occupant through the use of a uniquely trained neural network. The logic of the neural network was developed through extensive in-vehicle training with thousands of realistic occupant size and position scenarios. The ultrasonic occupant position sensor can also be used in conjunction with other technologies, (such as weight sensing, seat belt sensing, crash severity sensing, etc.) to feed information to the air bag system’s central processor to govern the deployment decision of the air bag.
Recommended Content
Authors
Topic
Citation
Breed, D., Summers, L., Carlson, J., and Koyzreff, M., "DEVELOPMENT OF AN OCCUPANT POSITION SENSOR SYSTEM TO IMPROVE FRONTAL CRASH PROTECTION," SAE Technical Paper 2001-06-0058, 2001.Also In
References
- Breed, D.S. Breed, D. S. “How Airbags Work” presented at the International Conference on Seatbelts and Airbags in 1993, in Canada
- Breed, D.S. “A Smart Airbag System” 16 th International Technical Conference on the Enhanced Safety of Vehicles 1998
- Techniques And Application Of Neural Networks Taylor, M. Lisboa, P. Ellis Horwood West Sussex, England 1993
- Eberhart, R. Simpson, P Dobbins, R. Introduction to Artificial Neural Systems West publishing Co. N.Y. 1992 Digital Neural Networks Kung, S. Y. PTR Prentice Hall Englewood Cliffs, New Jersey 1993
- Computational Intelligence PC Tools Academic Press, Inc. 1996 Orlando, Florida
- Naturally Intelligent Systems Caudill, M. Butler, C. MIT Press Cambridge Massachusetts 1990
- Digital Neural Networks Kung, S. Y. PTR Prentice Hall Englewood Cliffs, New Jersey 1993