This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Industrial Applicability of Modal Analysis on Operating Data, 2001
ISSN: 0148-7191, e-ISSN: 2688-3627
Published March 05, 2001 by SAE International in United States
Annotation ability available
Traditionally, vibration analysis in operating conditions (on the road or on a bench) had to be combined with experimental modal analysis in controlled laboratory conditions in order to understand the modal behaviour of the structure. This requires additional measurements, costs and time. However, in many applications, the real operating conditions may differ significantly from those applied during the modal test and hence the vibration modes from the modal test might not be representative for the active modes in operation conditions. The need for a capability of doing a modal analysis on data from operating conditions is obvious.
Over the last years, several modal parameter estimation techniques have been proposed and studied for modal parameter extraction from output-only data. Each method needs to make a number of assumptions and has some limitations. In this paper, the capabilities and limitations of the Least Squares Complex Exponential and two subspace techniques, referred to as the Balanced Realization (BR) and the Canonical Variate Analysis, are evaluated for its applicability to industrial cases.
|Technical Paper||Industrial Applicability of Modal Analysis on Operating Data, 1999|
|Technical Paper||Shake-Complete Car Analysis with Excitation Through Road Wheels|
|Technical Paper||Frequency Analysis of Vehicle Vibration System|
CitationDeweer, J., Dierckx, B., Van Der Auweraer, H., and Deblauwe, F., "Industrial Applicability of Modal Analysis on Operating Data, 2001," SAE Technical Paper 2001-01-3833, 2001, https://doi.org/10.4271/2001-01-3833.
- Hermans L. Van der Auweraer H. “Modal Testing and Analysis of Structures under Operational Conditions: Industrial Applications” Proc. NATO Advanced Study Institute on Modal Analysis and Testing Sesimbra (P) 549 564 May 3-15 1998
- Abdelghani M. Basseville M. Benveniste A. “In-Operation Damage Monitoring and Diagnostics of Vibrating Structures, with Applications to Offshore Structures and Rotating Machinery” Proc. Of IMAC XV Orlando 1997
- Desai U.B. Debajyoti P. Kirkpatrick R.D. “A realization approach to stochastic model reduction” Int. J. Control 42 4 821 838 1985
- Kung S. “A new identification and model reduction algorithm via singular value decomposition” Proc. 12 th Asilomar Conf. Circuits, Systems and Computers 705 714 Pacific Groves 1978
- James G.H. III Carne T.G. Laufer J.P. “The Natural Excitation Technique (NExT) for Modal Parameter Extraction from Operating Structures, the international Journal of Analytical and Experimental Modal Analysis” 10 4 260 277 1995
- Hermans L. Van der Auweraer H. “On the Use of Auto-and Cross-correlation functions to extract modal parameters from output-only data” Proc. of the 6 th International conference on Recent Advances in Structural Dynamics 1997
- Deweer J. Dierckx B. “Obtaining a Scaled Modal Model of Panel Type Structures Using Acoustic Excitation” IMAC XVII 1999
- Hermans L. Van der Auweraer H. Abelghani M. “Modal Testing and Analysis of a Car under Operational Conditions” Proc. IMAC-16 St. Barbara (CA) Feb. 2-5 1998 1000 1006
- Hermans L. Van der Auweraer H. Abelghani M. “Identification of Structural Models during System Operation with Application to Flutter Data Analysis” Proc. Int. AIAA/CEAS Forum on Aeroelasticity and Structure Dynamics Rome (I) June 17-20 1997 323 330
- Hermans L. Van der Auweraer H Hatami A. Cooper J. Uhl T. Lisowski W. Wasilak A. “In-Flight Modal Testing and Analysis of a Helicopter” Proc. IMAC-17 Kissimmee (FL) Feb. 8-11 1999
- Van der Auweraer H Hermans L. “Applications of Structural Model Identification During Normal Operating Conditions: An Overview of the EUREKA project SINOPSYS” Proc. IMAC-17 Kissimmee (FL) Feb. 8-11 1999
- Hermans L. Van der Auweraer H Benveniste M. Goursat M. Haerens D. Mourey P. “Estimation of In-Flight Structural Dynamics Models of a Spacecraft Launcher” Proc. ISMA23 International Conference on Noise and Vibration Engineering Leuven (B) September 16-18 1998 427 432